DEMCO Series NE-I Wafer Butterfly Valve, 12″, 200 psi

12″ (300 mm) DEMCO Series NE-I wafer butterfly valve, 200 psi drop-tight in an ASME Class 150 body. 2 Cameron part numbers: ductile iron body, aluminium bronze and nickel-plated ductile iron discs, Buna-N seat.
Key features
- Series: NE-I
- Body configuration: Wafer
- ASME pressure class: ASME Class 150 (285 psi non-shock body rating)
- Series
- NE-I
- Body configuration
- Wafer
- Sanitary / FDA service
- no
- Size range
- 12″ (300 mm)
- ASME pressure class
- ASME Class 150 (285 psi non-shock body rating)
- Operating temperature range
- Buna-N: 0°F to +180°F (−18°C to +82°C)
Product description
The 12″ (300 mm) DEMCO Series NE-I wafer butterfly valve is the short-neck, standard-installation member of the DEMCO family, built for ASME Class 125/150 flanges with the widest choice of body materials in the range. This page lists the 2 factory configurations we can supply in this size, each identified by its Cameron part number, with the body, disc, stem and seat it was built with. Every one is rated for 200 psi drop-tight, bi-directional shut-off in an ASME Class 150 body.
Configurations available
| Part number | Body | Disc | Stem | Seat |
|---|---|---|---|---|
J022136-1114311 | Ductile iron | Aluminium bronze | 416 stainless steel | Buna-N |
J022136-1115311 | Ductile iron | Nickel-plated ductile iron | 416 stainless steel | Buna-N |
Trim is read from the part number using DEMCO's ordering table. Confirm against the nameplate when we quote.
Reading the part number
Take J022136-1114311. J022136 is the DEMCO base number for a 12″ Series NE-I valve at 200 psi. The suffix is read left to right: body configuration (1 = wafer), body material (1 = ductile iron), stem (1 = 416 stainless steel), disc (4 = aluminium bronze) and seat (31 = Buna-N). The last character is the operator code.
Performance
- Body rating: ASME Class 150 (285 psi non-shock).
- Shut-off: 200 psi drop-tight, identical from either flow direction.
- Vacuum: sealed against 10 microns (29.9 in Hg).
- Buna-N seat: 0°F to +180°F (−18°C to +82°C).
- Flow coefficient: Cv 7,500 fully open.
Construction
- Hard-backed cartridge seat: the elastomer is bonded to a rigid backing ring and can be replaced in the field without special tools.
- Triple stem seal and a dry stem journal keep line fluid out of the stem bore.
- Floating disc centres itself in the seat; the stem is blowout-proof.
- Double-D upper stem and DEMCO top flange accept the full DEMCO actuation range.
- MSS SP-25 marking on every valve.
Installation
The wafer body is clamped between two ASME Class 125/150 flanges on through-bolts and self-centres on the bolt pattern. It is not rated for end-of-line service — choose the lug body if the valve must hold pressure with the downstream pipe removed.
Operators
The DEMCO top flange takes the 10-position locking handle, worm-gear operator and Series DR pneumatic actuators. DEMCO recommends a worm-gear operator at 8″ and larger. Confirm the operator supplied with each part number when we quote.
Supply
Supplied from surplus stock through our supply network. Quantity, unit condition and any documentation are confirmed on the quotation. Put the part number, quantity and delivery point on your RFQ. For the full Series NE-I range, including sizes and trims not listed here, see the DEMCO Series NE-I series page.
Identification
| Parameter | Value |
|---|---|
| Series | NE-I |
| Body configuration | Wafer |
| Sanitary / FDA service | no |
| Cameron part numbers | J022136-1114311, J022136-1115311 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 12″ (300 mm) |
Performance
| Parameter | Value |
|---|---|
| ASME pressure class | ASME Class 150 (285 psi non-shock body rating) |
| Drop-tight shut-off ratings | 200 psi drop-tight, bi-directional |
| Operating temperature range | Buna-N: 0°F to +180°F (−18°C to +82°C) |
| Vacuum rating | 29.9 in Hg (sealed against 10 microns) |
| End-of-line service capable | no |
| Flow coefficient Cv (full open) | 7,500 |
| Actuation options | Lever handles (10-position, 2-position, memory-stop, square nut), weatherproof worm-gear operators, Series DR double-acting and spring-return pneumatic actuators |
Compliance
| Parameter | Value |
|---|---|
| End-connection / flange standard | ASME Class 125/150 flanges (raised- or flat-face) |
Construction
| Parameter | Value |
|---|---|
| Body material options | Ductile iron |
| Stem material options | 416 stainless steel |
| Disc material options | Aluminium bronze, nickel-plated ductile iron |
| Seat elastomer options | Buna-N |
Shipping & lead time
What is the 12″ DEMCO NE-I wafer butterfly valve rated 200 psi used for?▾
How do I read DEMCO part number J022136-1114311 on the 12″ NE-I wafer valve?▾
Which configurations of the 12″ DEMCO NE-I wafer butterfly valve can Indus supply?▾
What are the body, disc and seat materials of the 12″ DEMCO NE-I wafer butterfly valve?▾
What pressure does the 12″ DEMCO NE-I wafer butterfly valve hold?▾
What temperature range does the 12″ DEMCO NE-I wafer butterfly valve cover?▾
Which flange standard and marking apply to the 12″ DEMCO NE-I wafer butterfly valve?▾
Can the 12″ DEMCO NE-I wafer butterfly valve be used at the end of a line?▾
Which operators fit the 12″ DEMCO NE-I wafer butterfly valve?▾
12″ DEMCO NE-I or NE-C wafer butterfly valve: which one?▾
Where is the 12″ DEMCO NE-I wafer butterfly valve made and what lead time applies?▾
What is the lead time for the 12″ DEMCO NE-I wafer butterfly valve?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
DEMCO butterfly valve part numbers decoded: series, size, body, stem, disc and seat
A DEMCO butterfly valve number such as J022122-1215311 spells out the valve: series and size in the base, then body style, body, stem, disc and seat in the suffix. How to read one, and when to trust the nameplate instead.
5 min read
Oilfield & pressure control
Butterfly valves: wafer, lug or grooved, shut-off ratings and dead-end service
A butterfly valve is the cheapest, lightest way to isolate a large line — but the body style decides what it can do. A wafer valve is clamped between two flanges and cannot hold pressure with one side removed; a lug valve can, within limits the maker sets; a grooved valve joins grooved pipe without flanges at all. How the DEMCO NE-C, NE-I, NE-D and NF-C series and the Victaulic grooved valves differ, what their shut-off ratings mean, and how to choose the handle or gear — and where concentric, double offset and triple offset valves to API 609 take over.
8 min read







