DEMCO Series NE-I Sanitary Butterfly Valve (FDA), 2″–12″
Category image · Valves & ManifoldsFDA-compliant sanitary butterfly valve for the food, beverage, and pharmaceutical industries. Vented disc, dry stem journal, no closed chambers — engineered to meet rigorous sanitary-service requirements.
Key features
- Series: NE-I Sanitary
- Body configuration: Wafer only
- Sanitary / FDA service
- ASME pressure class: ASME Class 150 (285 psi non-shock body rating)
- Series
- NE-I Sanitary
- Body configuration
- Wafer only
- Sanitary / FDA service
- yes
- Size range
- 2″, 2½″, 3″, 4″, 6″, 8″, 10″, 12″ (50–300 mm; 5″/125 mm not available)
- ASME pressure class
- ASME Class 150 (285 psi non-shock body rating)
- Operating temperature range
- +20°F to +275°F (−7°C to +135°C) for Food-Grade EPT (peroxide-cured) — most-common dairy/beverage choice
Product description
The DEMCO Series NE-I Sanitary is an FDA-compliant sanitary butterfly valve, exclusively designed to meet the rigorous requirements of sanitary service in the food, beverage, dairy and pharmaceutical industries. All wetted parts are produced from FDA-approved materials. Discs are produced from investment castings, smooth and non-porous, with stem bosses minimised for increased flow. Drilled passageways — a design originated by DEMCO — vent the entire interior of the disc to atmosphere, leaving no closed chamber for the culture of undesirable organisms. The projecting inner surface of the resilient seat contacts and is compressed by the mating flange to form a smooth, uninterrupted flow way that ensures aseptic conditions after a piping flush. Handle parts are bronze with stainless-steel fasteners, permitting caustic wash-down.
Construction
- Body configurations: Wafer only
- Size range: 2″, 2½″, 3″, 4″, 6″, 8″, 10″, 12″ (50–300 mm; 5″/125 mm not available)
- End connections: ASME Class 125/150 sanitary flanges
- Body materials: Bronze, 316 stainless steel (CF8M) — polished / tumbled / unpolished, aluminium, ENC nickel-coated ductile iron
- Stem materials: 316 stainless steel; 17-4 PH SS upper stem on 8″–12″
- Disc materials: 316 SS — polished (#4 dairy finish), tumbled (vibratory finish), or unpolished (as-cast surface)
- Seat elastomers: Food-Grade EPT (peroxide-cured), Sulfur-Cured Food-Grade EPDM, Peroxide-Cured Food-Grade Buna-N — all FDA 21 CFR 177.2600 compliant; Black Neoprene, Viton, White Neoprene also available
- Bearings: Bronze (standard); throttling discs include 4 stem O-rings for stem sealing.
Performance
- Pressure class: ASME Class 150 (285 psi non-shock body rating).
- Drop-tight shut-off ratings: 200 psi (drop-tight).
- Vacuum: Sealed against 10 microns of vacuum (29.9 in Hg).
- Temperature range: +20°F to +275°F (−7°C to +135°C) for Food-Grade EPT (peroxide-cured) — most-common dairy/beverage choice.
- Bi-directional sealing: Identical drop-tight closure from either flow direction.
- End-of-line service: Not rated for end-of-line service.
- Flow coefficient (Cv at 90° open): 145 (2″) → 7,500 (12″).
Engineered features
- FDA 21 CFR 177.2600 compliant seat elastomers (Food-Grade EPT, Buna-N, EPDM)
- Dry stem journal — no fluid behind the seat
- Vented disc design — no closed chambers for organism culture
- Smooth investment-cast 316 SS disc with minimal stem bosses
- Trap-free flow way — projecting seat lip seals against mating flange
- Three disc finishes: polished (#4 dairy), tumbled, or unpolished
- Caustic wash-down compatible — bronze handle hub with SS fasteners
- Body in bronze, 316 SS, aluminium or ENC-coated ductile iron
Typical applications
- Dairy processing (milk, cream, whey, cultured products)
- Brewery and beverage process lines
- Pharmaceutical and biotech utility lines
- Edible oil and fat processing
- CIP / SIP (clean-in-place / sterilise-in-place) loop service
- Cosmetics and personal-care manufacturing
- Sanitary water service (RO, DI, WFI auxiliary)
How to order
DEMCO uses an 11-character part number to specify each unique configuration. Build the part number from the base number plus six selection digits:
| Position | Selection |
|---|---|
| Body Configuration | Wafer (1), Lug (5) |
| Body Material | Ductile Iron (1), Cast Iron wafer (2), Aluminium Bronze (3), Carbon Steel (4), Aluminium NE-I wafer only (5), ENC Coated DI (6), Stainless Steel (8) |
| Stem Material | 416 SS (1), 316 SS (2), Monel (3) |
| Disc Material | 316 SS (2), Monel (3), Aluminium (4), Ductile Iron (5), Vented (6), Solid SS (9), Alloy 20 (7), Hastelloy C (8) |
| Seat Elastomer | Buna-N (31), Black Neoprene (32), Hypalon (33), Viton (34), Peroxide-Cured EPDM (35), Natural Rubber (36), White Neoprene (37), ETM-30230 (01), Fluorosteam (02), Peroxide-Cured Buna-N (03) |
| Actuation | Bare Shaft (—), 10-Position Locking Handle (14), 2-Position Locking Handle (64), Throttling Memory-Stop Handle (24), Square Nut (5), Worm-Gear Operator, Series DR Pneumatic Actuator |
Example DEMCO base part numbers in this series:
23150 (2″, 200 psi)23151 (2½″, 200 psi)23154 (6″, 200 psi)23155 (8″, 200 psi)23157 (12″, 200 psi)
For your RFQ, please specify: required size, pressure rating, body configuration (wafer or lug), body / stem / disc materials, seat elastomer, and required actuation. Indus Hydraulics will return an estimate against the corresponding DEMCO base part number.
Compliance & marking
- MSS SP-25 marking standard on every valve.
- Body rating to ASME Class 150 (285 psi non-shock).
- Wafer body diameters self-centre in ASME Class 150 flange patterns.
- Triple stem seal: hard-backed cartridge seat + integral flange seal + dual O-ring stem ribs in the seat bore.
Companion products
Manual handles, weatherproof worm-gear operators, and Series DR pneumatic actuators all interchange on this valve via the DEMCO top-flange standard. Compatible Indus SKUs include IH-VAL-BFLY-HDL-10P, IH-VAL-BFLY-HDL-MEM, IH-VAL-BFLY-WGO, IH-VAL-BFLY-DR-DA. For automated installations, also see the position indicator switch, solenoid valve, pneumatic positioner, and seal-repair-kit accessories listed against the corresponding actuator product.
Identification
| Parameter | Value |
|---|---|
| Series | NE-I Sanitary |
| Body configuration | Wafer only |
| Sanitary / FDA service | yes |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2″, 2½″, 3″, 4″, 6″, 8″, 10″, 12″ (50–300 mm; 5″/125 mm not available) |
Performance
| Parameter | Value |
|---|---|
| ASME pressure class | ASME Class 150 (285 psi non-shock body rating) |
| Drop-tight shut-off ratings | 200 psi (drop-tight) |
| Operating temperature range | +20°F to +275°F (−7°C to +135°C) for Food-Grade EPT (peroxide-cured) — most-common dairy/beverage choice |
| Vacuum rating | 29.9 in Hg (sealed against 10 microns) |
| End-of-line service capable | no |
| Flow coefficient Cv (full open) | 145 (2″) → 7,500 (12″) |
| Actuation options | Sanitary-trim lever handles (bronze hub with stainless-steel parts and fasteners), weatherproof worm-gear operators, Series DR pneumatic actuators |
Compliance
| Parameter | Value |
|---|---|
| End-connection / flange standard | ASME Class 125/150 sanitary flanges |
Construction
| Parameter | Value |
|---|---|
| Body material options | Bronze, 316 stainless steel (CF8M) — polished / tumbled / unpolished, aluminium, ENC nickel-coated ductile iron |
| Stem material options | 316 stainless steel; 17-4 PH SS upper stem on 8″–12″ |
| Disc material options | 316 SS — polished (#4 dairy finish), tumbled (vibratory finish), or unpolished (as-cast surface) |
| Seat elastomer options | Food-Grade EPT (peroxide-cured), Sulfur-Cured Food-Grade EPDM, Peroxide-Cured Food-Grade Buna-N — all FDA 21 CFR 177.2600 compliant; Black Neoprene, Viton, White Neoprene also available |
Shipping & lead time
What is the DEMCO Series NE-I Sanitary butterfly valve used for?▾
Which sizes does the DEMCO NE-I Sanitary come in?▾
What materials does the DEMCO NE-I Sanitary come in?▾
Which seats does the DEMCO NE-I Sanitary use and are they FDA compliant?▾
What pressure and vacuum does the DEMCO NE-I Sanitary hold?▾
What temperature range does the DEMCO NE-I Sanitary cover?▾
How does the DEMCO NE-I Sanitary keep a line aseptic?▾
Which operators fit the DEMCO NE-I Sanitary?▾
DEMCO NE-I Sanitary or NEI-T Teflon-lined valve: which should I choose?▾
Does the DEMCO NE-I Sanitary have any other approvals?▾
Where is the DEMCO NE-I Sanitary made and what lead time applies?▾
What is the lead time for the DEMCO NE-I Sanitary butterfly valve?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Oilfield & pressure control
DEMCO butterfly valve part numbers decoded: series, size, body, stem, disc and seat
A DEMCO butterfly valve number such as J022122-1215311 spells out the valve: series and size in the base, then body style, body, stem, disc and seat in the suffix. How to read one, and when to trust the nameplate instead.
5 min read
Oilfield & pressure control
Butterfly valves: wafer, lug or grooved, shut-off ratings and dead-end service
A butterfly valve is the cheapest, lightest way to isolate a large line — but the body style decides what it can do. A wafer valve is clamped between two flanges and cannot hold pressure with one side removed; a lug valve can, within limits the maker sets; a grooved valve joins grooved pipe without flanges at all. How the DEMCO NE-C, NE-I, NE-D and NF-C series and the Victaulic grooved valves differ, what their shut-off ratings mean, and how to choose the handle or gear — and where concentric, double offset and triple offset valves to API 609 take over.
8 min read








