Skip to content
SUN HYDRAULICSIH-SUN-DR-O

Sun Hydraulics 3-Way, Direct-Acting, Directional Valve with Drain to Port 4 (1 Blocked, 2 to 3 Open) — DRBO, DRCO, Series 1 to 2

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DRBO direct-acting pressure-operated directional valve, series 1, T-21A cavity — dimension drawing
VIEW 01·Sun Hydraulics DRBO direct-acting pressure-operated directional valve, series 1, T-21A cavity — dimension drawing
1 / 3

Sun Hydraulics 3-Way, Direct-Acting, Directional Valve with Drain to Port 4 (1 Blocked, 2 to 3 Open): DRBO, DRCO, series 1 to 2, 7 gpm to 15 gpm (28 L/min to 60 L/min), T-21A, T-22A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Direct-Acting Pressure-Operated Directional Valve
  • Capacity: 7 gpm to 15 gpm (28 L/min to 60 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-21A, T-22A
Valve function
Direct-Acting Pressure-Operated Directional Valve
Series (frame sizes)
1 to 2
Cavity
T-21A, T-22A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A directional cartridge switched by pressure rather than a solenoid: it shifts once the pressure difference between port 1 and the drain passes its spring setting. It can switch a moderate flow itself or pilot a larger directional or logic cartridge. Being direct-acting, it leaks little and uses almost no pilot flow.

This version

  • At rest: 1 blocked; 2 to 3 open.
  • The spring chamber drains to a separate port 4, so pressure at port 3 does not shift the setting and port 3 can work as a load port.

Sizes and cavities

Sun Hydraulics builds this valve in 2 versions:

  • DRBO — series 1, T-21A cavity, 7 gpm (28 L/min)
  • DRCO — series 2, T-22A cavity, 15 gpm (60 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 2 in³/min. (30 cc/min)

Configuration options

The letters after the base model code choose these options (shown for DRBO; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
  • Setting range: A — 500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 200 psi (14 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, S — 25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting, W — 750 - 4500 psi (50 - 315 bar), 1000 psi (70 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated

Option rules: If the modifier is /AP, the control must be C or L.

Selection notes

  • It can modulate between positions; it is not a snap-acting switch.
  • For series 1 valves with a panel-mount handknob, cut a 0.75 in (19 mm) hole in the panel.

Where it is used

Pressure-sequenced switching — unloading, high-low pump circuits, interlocks, piloting logic elements.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, Polyurethane: 990022002, Viton: 990022006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DRBOLAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionDirect-Acting Pressure-Operated Directional Valve
Series (frame sizes)1 to 2
CavityT-21A, T-22A

Performance

ParameterValue
Capacity7 gpm to 15 gpm (28 L/min to 60 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting, B — 50 - 1500 psi (3,5 - 105 bar), 200 psi (14 bar) Standard Setting, D — 25 - 800 psi (1,7 - 55 bar), 200 psi (14 bar) Standard Setting, E — 25 - 400 psi (1,7 - 28 bar), 200 psi (14 bar) Standard Setting, S — 25 - 200 psi (1,7 - 14 bar), 100 psi (7 bar) Standard Setting, W — 750 - 4500 psi (50 - 315 bar), 1000 psi (70 bar) Standard Setting
Max leakage2 in³/min. (30 cc/min)

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, O — Handknob with Panel Mount
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, Polyurethane: 990022002, Viton: 990022006
Weight.55 lb (0,25 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at