Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Hoses & Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Gabon, Republic of the Congo
- Southern Africa
- South Africa, Zimbabwe, Namibia
90° BSP Female 60° Cone Elbow Hose Fitting
BSP swivel female 60° cone with o-ring (45º elbow)
SAE Code 62 Flange Head 45° Elbow Crimp Fitting for Spiral Hose
Komatsu Male Hose Fitting (JIS Metric)
Metric Male 24° Cone (Heavy Series) Hose Fitting
BSP Threaded Double Flange
45° SAE Female 45° Cone Hose Fitting
JIS Metric Male 60° Cone Plug
Double hexagonal ORFS swivel female straight
Branch Tee Connector f NPT X m NPT X f NPT
Adjustable BranchTee (Variant 2)
ORFS Female Swivel 90° Elbow Crimp Fitting for Spiral Hose
Thread Reducer
ORFS Male O-Ring × ORFS Female Run Tee
ISO 7241 Series A Non-Valved Quick Coupler
Gas tube standpipes (90º elbow)
High Pressure Banjo Elbow BSPP
SAE Code 62 Flange Head Crimp Fitting for Braided Hose
O-Rings for SAE Hydraulic Flanges
BSP swivel female flat seat (45º elbow)
Male Female Connector m SAE X f NPT
90° Elbow Metric Male 74° Cone × Metric Male Adjustable Stud End ISO
45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End
90° Elbow m JIC X m BSPT
Pressure Washer Gun Insert — Kärcher Interchange
90° Metric Standpipe Tube Fitting (DIN 2353)
SAE O-Ring Boss Male Crimp Fitting for Spiral Hose
JIC 37° Female Swivel 90° Elbow Crimp Fitting for Braided Hose
90° Elbow Metric Male 74° Cone × BSP Male O-Ring Adjustable Stud End
Weld Flange Connector S-series flange X Weld tube
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read