90° Male Female Connector m NPT X f NPT
90° Male Female Connector m NPT X f NPT — NPT family 90 elbow for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: 90-elbow
- Port A Thread: NPT taper 1/8" to 2"
- Port A Sealing: npt-taper
- Nominal Size Range: NPT 1/8" to 2"
- Max Working Pressure: up to 350 bar (5000 psi)
- Body Configuration
- 90-elbow
- Port A Thread
- NPT taper 1/8" to 2"
- Port A Sealing
- npt-taper
- Nominal Size Range
- NPT 1/8" to 2"
- Max Working Pressure
- up to 350 bar (5000 psi)
Product description
The 90° Male Female Connector m NPT X f NPT is a 90° elbow hydraulic adapter in the NPT family. 90° Male Female Connector m NPT X f NPT — NPT family 90 elbow for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: 90° elbow
- Port A: Male — NPT taper 1/8" to 2" (NPT taper thread (self-sealing))
- Port B: Female — NPT taper 1/8" to 2" (NPT taper thread (self-sealing))
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 350 bar (5000 psi). NPT family — ASME B1.20.1 / ISO 7-1 — National Pipe Taper. 60° thread angle (NOT interchangeable with BSPT 55°). PTFE tape or anaerobic sealant required for hydraulic service.
Applicable Standards
- ASME B1.20.1
- ISO 7-1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 90-elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPT taper 1/8" to 2" |
| Port A Sealing | npt-taper |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPT taper 1/8" to 2" |
| Port B Sealing | npt-taper |
| Port B Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | NPT 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 350 bar (5000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.1, ISO 7-1 |
Shipping & lead time
Sizes & part numbers
11 sizes| Indus part no. | End 1 | End 2 | S1 (mm) | L1 (mm) | L2 (mm) | Working pressure (bar) |
|---|---|---|---|---|---|---|
| IH-AD-NPT-009-02 | NPT1/8"X27 | NPT1/8"X27 | 16 | 24.5 | 17.8 | 345 |
| IH-AD-NPT-009-04 | NPT1/4"X18 | NPT1/4"X18 | 19 | 28 | 22.4 | 275 |
| IH-AD-NPT-009-0406 | NPT1/4"X18 | NPT3/8"X18 | 24 | 31 | 25 | 210 |
| IH-AD-NPT-009-06 | NPT3/8"X18 | NPT3/8"X18 | 24 | 33.5 | 25 | 210 |
| IH-AD-NPT-009-08 | NPT1/2"X14 | NPT1/2"X14 | 30 | 41.2 | 31.2 | 210 |
| IH-AD-NPT-009-1208 | NPT3/4"X14 | NPT1/2"X14 | 30 | 45 | 31.2 | 170 |
| IH-AD-NPT-009-12 | NPT3/4"X14 | NPT3/4"X14 | 33 | 45.2 | 34.5 | 170 |
| IH-AD-NPT-009-16 | NPT1"X11.5 | NPT1"X11.5 | 41 | 54.5 | 41.1 | 140 |
| IH-AD-NPT-009-20 | NPT1.1/4"X11.5 | NPT1.1/4"X11.5 | 48 | 63 | 43.2 | 80 |
| IH-AD-NPT-009-24 | NPT1.1/2"X11.5 | NPT1.1/2"X11.5 | 63 | 71.5 | 52.8 | 70 |
| IH-AD-NPT-009-32 | NPT2"X11.5 | NPT2"X11.5 | 65 | 73.5 | 62 | 50 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Adapter 90° Bogen NPT Innengewinde auf NPT
- fr
- adaptateur coude 90° NPT femelle sur NPT
- es
- adaptador codo 90° NPT hembra a NPT
- it
- adattatore gomito 90° NPT femmina a NPT
Engineers viewing this also looked at
Male Female Connector m SAE X f NPT
Male Female Connector m NPT X f NPT
Cap NPT
Plug NPT
Swivel Connector m SAE X f NPSM
90° Swivel Connector m NPT X f NPSM
Swivel Connector m NPT X f NPSM
