SAE 100R18 Non-Conductive Thermoplastic Hydraulic Hose, Orange
SAE 100R18 Non-Conductive Thermoplastic Hydraulic Hose, Orange: 4 part numbers, 1/4" to 1/2".
Key features
- Application Family: non-conductive hydraulic hose
- Inner Diameter Range: 1/4" to 1/2"
- Operating Temperature: −67 °F to 212 °F (−55 °C to 100 °C)
- Application Family
- non-conductive hydraulic hose
Product description
Non-conductive thermoplastic hydraulic hose to SAE 100R18, orange, for equipment that works near high voltage: aerial platforms, cranes, rescue tools.
Construction
- Tube: polyester elastomer
- Reinforcement: one or two synthetic-fibre braids
- Cover: low-friction polyester, orange, non-conductive
- Temperature: −67 °F to 212 °F (−55 °C to 100 °C)
- SAE 100R18 specifies 3,000 psi working pressure in every size
Pressure
SAE J517 100R18 sets a 3,000 psi working pressure for every size from 3/16" to 1"; the manufacturer publishes no separate figure. Non-conductive service also needs the assembly tested for electrical leakage to the standard your equipment follows.
Sizes and supply
4 part numbers, 1/4" to 1/2". Each part number is one size in one supply form; the Sizes & Part Numbers tab lists them.
How to order
Quote the Indus part number, or send the hose bore, the length and the service. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Application Family | non-conductive hydraulic hose |
Dimensions
| Parameter | Value |
|---|---|
| Inner Diameter Range | 1/4" to 1/2" |
Performance
| Parameter | Value |
|---|---|
| Operating Temperature | −67 °F to 212 °F (−55 °C to 100 °C) |
Construction
| Parameter | Value |
|---|---|
| Construction | Tube: polyester elastomer; Reinforcement: one or two synthetic-fibre braids; Cover: low-friction polyester, orange, non-conductive |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J517 100R18 |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Supply | Hose bore |
|---|---|---|
| IH-HS-R18LFNC-04 | per foot | -04 · 1/4" |
| IH-HS-R18LFNC-05 | per foot | -05 · 5/16" |
| IH-HS-R18LFNC-06 | per foot | -06 · 3/8" |
| IH-HS-R18LFNC-08 | per foot | -08 · 1/2" |
Supply — Length and packaging the part number is supplied in, as published. Ask us for the dimension drawing if you need it stamped.
What pressure is it rated for?▾
What temperature range does it take?▾
Do you sell cut lengths?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Specification & standards
Hydraulic hose: the complete guide to constructions, standards, sizes and pressure
Braid, spiral, compact, thermoplastic and PTFE; SAE 100R against EN 853, 856 and 857; dash sizes and pressure by bore. The hydraulic hose guide, with every figure from the grades we stock.
8 min read
Failure analysis
Swollen or hardened tube: reading fluid incompatibility off the failure
Cut a failed hose open and the tube tells you whether the fluid was wrong. Swollen and soft is one problem, shrunken and brittle is the opposite one, and both mean the hose and the fluid were never suited.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read
