What does "multiseal" mean here?

It is the supplier's name for the series, and they do not define it. What we can tell you is what it measures as: at every shared thread and bore the seat is within about a millimetre of the 60° cone in the same range, and four to five millimetres away from both the flat seat and the 74° cone. So order it as a 60° cone fitting. If your port is flat-faced or takes a bonded seal, ask us before you order — we are confirming with the manufacturer whether this seat is cut to take both, and we would rather tell you the answer than guess it.

Does it have an O-ring?

No. This is the metal-to-metal variant. The catalogue lists a dimensionally identical fitting that does carry an O-ring in the cone — same thread, same hex — and this is not it. Both will start on the same thread, which is what makes them easy to order by mistake.

What is the sealing form?

60° cone seat, metal-to-metal (no O-ring). Pair it with the matching counterpart — a mismatched sealing form will seat but will not hold pressure.

What sizes are available?

22 sizes, -03 to -32, threads G1"×11 to G5/8"×14. Every row in the table on this page is an orderable part number.

What is the maximum working pressure?

The hose grade and bore set the assembly rating, not the fitting. A correctly crimped fitting does not derate the hose. Tell us the grade and bore on the RFQ and we will confirm the figure in writing.

Which ferrule pairs with this fitting?

The one that matches your hose grade — the skive/no-skive choice follows the hose construction, not the fitting end. Send the hose grade with your enquiry and we will specify the ferrule and the crimp diameter.

Is stainless steel available?

Yes — 316 stainless on request across the range. Standard supply is carbon steel, zinc-plated and Cr3+ passivated. Add "-SS" to the part number when you enquire.

Can Indus crimp the assembly?

Yes. We crimp, pressure-test and certify assemblies in Dubai and ship UAE-wide. Send the hose grade, bore, both end fittings, overall length and orientation.

INDUS HYDRAULICSIH-BSP-FEM-MS-45

45° BSP Female Multiseal Hose Fitting

Name: 45° BSP Female Multiseal Hose Fitting
Brand: Indus Hydraulics
SKU: IH-BSP-FEM-MS-45

BSP Hose FittingsEx-stock · delivery in 3 days

VIEW 01·45° elbow BSP female swivel hose fitting, multiseal cone, zinc-plated steel with crimp tail

45° BSP Female Multiseal — 60° cone seat, metal-to-metal (no O-ring), 22 sizes, -03 to -32.

Key features

Fitting Configuration: 45-elbow
Thread Form: G1"×11 to G5/8"×14
Sealing Form: 60° cone seat, metal-to-metal (no O-ring)
Nominal Size Range: -03 to -32

Fitting Configuration: 45-elbow
Thread Form: G1"×11 to G5/8"×14
Sealing Form: 60° cone seat, metal-to-metal (no O-ring)
Nominal Size Range: -03 to -32

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The 45° BSP Female Multiseal Hose Fitting is a hydraulic hose fitting with 60° cone seat, metal-to-metal (no O-ring).

The supplier calls this series "multiseal" and does not define the term. Measured against its own catalogue it is unambiguous: at every shared thread and bore the seat depth sits within about a millimetre of the 60° cone and four to five millimetres away from both the flat seat and the 74° cone. What it does not carry is an O-ring — the 24° multiseal sits beside its O-ring twin in the same book with an identical thread, tube diameter and hex, and no O-ring column at all.

Construction

Configuration: 45 elbow
Thread: G1"×11 to G5/8"×14
Sealing form: 60° cone seat, metal-to-metal (no O-ring)
Gender: female-swivel
Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)

Sizes

22 sizes, -03 to -32, threads G1"×11 to G5/8"×14. The full size and dimension table is on this page.

How to order

Quote the Indus part number for the size you need. Tell us the hose grade and bore and we will include the matching crimp ferrule — the ferrule follows the hose, not the fitting. Indus crimps and pressure-tests assemblies before dispatch.

Identification

Parameter	Value
Fitting Configuration	45-elbow
Thread Form	G1"×11 to G5/8"×14
Sealing Form	60° cone seat, metal-to-metal (no O-ring)
Thread Gender	female-swivel

Dimensions

Parameter	Value
Nominal Size Range	-03 to -32

Construction

Parameter	Value
Material	Carbon steel (316 stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	BSP parallel thread to ISO 228-1

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

22 sizes

Indus part no.	Hose bore	Size	S2 (mm)	A (mm)	C (mm)	H (mm)
IH-BSP-FEM-MS-45-0304	-03 · 3/16" · DN5	G1/4"×19	19	41.3	4	20.4
IH-BSP-FEM-MS-45-0408	-04 · 1/4" · DN6	G1/2"×14	27	43.9	6	23.8
IH-BSP-FEM-MS-45-0404	-04 · 1/4" · DN6	G1/4"×19	19	43.7	4	21.6
IH-BSP-FEM-MS-45-0402	-04 · 1/4" · DN6	G1/8"×28	14	43.7	2	21.6
IH-BSP-FEM-MS-45-0506	-05 · 5/16" · DN8	G3/8"×19	22	46.2	5	22.9
IH-BSP-FEM-MS-45-0608	-06 · 3/8" · DN10	G1/2"×14	27	42.5	6	18.2
IH-BSP-FEM-MS-45-0606	-06 · 3/8" · DN10	G3/8"×19	22	48.1	5	23.9
IH-BSP-FEM-MS-45-0808	-08 · 1/2" · DN12	G1/2"×14	27	61.8	6	26.8
IH-BSP-FEM-MS-45-0812	-08 · 1/2" · DN12	G3/4"×14	32	63.2	9.5	28.3
IH-BSP-FEM-MS-45-0806	-08 · 1/2" · DN12	G3/8"×19	22	60.4	5	25.4
IH-BSP-FEM-MS-45-1008	-10 · 5/8" · DN16	G1/2"×14	27	73	6	29
IH-BSP-FEM-MS-45-1012	-10 · 5/8" · DN16	G3/4"×14	32	70.4	9.5	29.6
IH-BSP-FEM-MS-45-1010	-10 · 5/8" · DN16	G5/8"×14	30	73.7	8	28.9
IH-BSP-FEM-MS-45-1216	-12 · 3/4" · DN20	G1"×11	41	81.6	11	33.5
IH-BSP-FEM-MS-45-1212	-12 · 3/4" · DN20	G3/4"×14	32	80.6	9.5	33.2
IH-BSP-FEM-MS-45-1210	-12 · 3/4" · DN20	G5/8"×14	30	79.8	8	32.5
IH-BSP-FEM-MS-45-1416	-14 · 7/8" · DN22	G1"×11	41	83.3	11	33
IH-BSP-FEM-MS-45-1616	-16 · 1" · DN25	G1"×11	41	89.2	11	35
IH-BSP-FEM-MS-45-1620	-16 · 1" · DN25	G1.1/4"×11	50	91.4	9.1	37.1
IH-BSP-FEM-MS-45-2020	-20 · 1.1/4" · DN32	G1.1/4"×11	50	102.9	10	41.2
IH-BSP-FEM-MS-45-2424	-24 · 1.1/2" · DN40	G1.1/2"×11	55	119.8	11.5	49
IH-BSP-FEM-MS-45-3232	-32 · 2" · DN50	G2"×11	70	137.4	15	53

S2 — Dimension S2 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: 45° Bogen BSP Innengewinde mit O-Ring 60° Konus Schlaucharmatur
fr: femelle coude 45° BSP cône 60° avec joint torique embout de flexible
es: hembra BSP codo 45° con junta tórica cono 60° racor de manguera
it: femmina gomito 45° BSP cono 60° con O-ring raccordo per tubo flessibile

From the blog

Written about this range

Thread & fitting identification

Measuring a fitting without gauges: what you can establish in the field

No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.

3 min read

Buying fittings & adapters

Consolidating fittings with a hose order

One consignment, one set of documents, one clearance. The saving is not in the parts — it is in everything that happens to a parcel between here and your gate.

3 min read

Thread & fitting identification

BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not

They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.

3 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

90° elbow BSP female swivel hose fitting, multiseal cone, zinc-plated steel with crimp tail

IH-BSP-FEM-MS-90

45° BSP Female Multiseal Hose Fitting

Key features

Product description

Construction

Sizes

How to order

Identification

Dimensions

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

Measuring a fitting without gauges: what you can establish in the field

Consolidating fittings with a hose order

BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not

Engineers viewing this also looked at

90° BSP Female Multiseal Hose Fitting

BSP Female Thrust Wire Nut Hose Fitting

BSP Male 60° Cone Hose Fitting

BSP Male 60° Cone Bulkhead Hose Fitting

BSP Male 60° Cone or Bonded Seal Hose Fitting

BSP Male Flat Seal Hose Fitting

BSPT Male Hose Fitting (Tapered Thread)

BSPT Male Tapered Hose Fitting (SP Body)