No-skive crimp ferrule for Manuli wire braid hoses, part references M03400, M03450. 17 sizes, DN5 – DN102 (3/16" – 4"), with outside diameter and length listed for every reference.
Key features
- Ferrule Type: no-skive
- Compatible Hoses: Manuli wire braid hoses
- Nominal Size Range: DN5 – DN102 (3/16" – 4")
Product description
The M03400 is Manuli's no-skive ferrule for wire braid hydraulic hoses and the widest-spanning series in the ferrule range — it is the only one that carries on past DN51, running all the way to DN102 (4").
Sizes and dimensions
The dimension sheet also lists M03450-08, a second DN12 reference with a larger outside diameter (30.3 mm) and a shorter body (31.0 mm) than the M03400-08. Both are shown below.
| Part ref. | DN | Dash | Inch | D (mm) | L (mm) |
|---|---|---|---|---|---|
| M03400-03 | 5 | -3 | 3/16" | 21.0 | 23.0 |
| M03400-04 | 6 | -4 | 1/4" | 23.0 | 30.1 |
| M03400-05 | 8 | -5 | 5/16" | 24.0 | 30.0 |
| M03400-06 | 10 | -6 | 3/8" | 26.0 | 31.1 |
| M03400-08 | 12 | -8 | 1/2" | 29.0 | 34.0 |
| M03450-08 | 12 | -8 | 1/2" | 30.3 | 31.0 |
| M03400-10 | 16 | -10 | 5/8" | 33.0 | 37.0 |
| M03400-12 | 19 | -12 | 3/4" | 37.0 | 42.0 |
| M03400-16 | 25 | -16 | 1" | 46.0 | 50.7 |
| M03400-20 | 31 | -20 | 1.1/4" | 59.0 | 57.2 |
| M03400-24 | 38 | -24 | 1.1/2" | 67.0 | 64.8 |
| M03400-32 | 51 | -32 | 2" | 80.0 | 68.3 |
| M03400-38 | 60 | -38 | 2.3/8" | 82.5 | 69.0 |
| M03400-40 | 63 | -40 | 2.1/2" | 88.2 | 68.8 |
| M03400-48 | 76 | -48 | 3" | 103.0 | 75.0 |
| M03400-56 | 89 | -56 | 3.1/2" | 123.4 | 91.0 |
| M03400-64 | 102 | -64 | 4" | 131.0 | 93.0 |
D is the ferrule outside diameter and L the overall length, both in millimetres and both as supplied — they are not crimp dimensions. Across this series D runs 21.0–131.0 mm and L runs 23.0–93.0 mm.
Construction
- Ferrule type: no-skive
- Published by Manuli for wire braid hoses
- Part references in this series: M03400, M03450
- Bore coverage: DN5 – DN102 (3/16" – 4"), 17 references
No-skive means the ferrule crimps over the hose cover as supplied, with no stripping step. It is faster to assemble and removes the commonest field error on a skive assembly, which is skiving to the wrong depth.
Selecting a size
Read the bore off your hose — DN, dash or inch, whichever your drawing uses — and take the part reference on that row. The D and L columns are there for clearance: a ferrule has to fit the routing and the crimp die, and on tight installations that decides between two series more often than the bore does.
The crimp diameter is not on this sheet, and it is not a property of the ferrule alone — it comes from the hose grade and the fitting it is crimped with, on the die chart for your crimper. Send us the crimper model with the enquiry and we will quote against it.
How to order
Quote the part reference from the table, or give us the hose grade, the bore and the quantity and we will identify it. Indus supplies these ferrules loose or crimped as a finished assembly with the matching fitting at each end — say which when you send the enquiry.
Identification
| Parameter | Value |
|---|---|
| Ferrule Type | no-skive |
| Part Reference Range | M03400, M03450 |
| Compatible Hoses | Manuli wire braid hoses |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | DN5 – DN102 (3/16" – 4") |
| Dash Size Range | -3 to -64 |
| Outside Diameter (D) Range | 21.0 – 131.0 mm |
| Length (L) Range | 23.0 – 93.0 mm |
Construction
| Parameter | Value |
|---|---|
| Crimp Method | Crimped straight over the hose cover — no skiving step before assembly |
Commercial
| Parameter | Value |
|---|---|
| Sold By | each |