Male JIC 37° × SAE Code 61 Flange 45° Elbow Adapter

Male JIC 37° × SAE Code 61 Flange 45° Elbow Adapter — SAE Flange Adapter family 45 elbow for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: 45-elbow
- Port A Thread: JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Port A Sealing: 37-cone
- Nominal Size Range: 1/2" to 2"
- Max Working Pressure: L-series up to 210 bar (3000 psi); S-series up to 415 bar (6000 psi)
- Body Configuration
- 45-elbow
- Port A Thread
- JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Port A Sealing
- 37-cone
- Nominal Size Range
- 1/2" to 2"
- Max Working Pressure
- L-series up to 210 bar (3000 psi); S-series up to 415 bar (6000 psi)
Product description
The 45° Elbow Flange Connector m JIC X L-series flange is a 45° elbow hydraulic adapter in the SAE Flange Adapter family. 45° Elbow Flange Connector m JIC X L-series flange — SAE Flange Adapter family 45 elbow for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: 45° elbow
- Port A: Male — JIC 37° UN/UNF (7/16-20 to 1-7/8-12) (37° cone (JIC))
- Port B: Flange face — SAE J518 Code 61 L-series flange head (1/2" to 2") (SAE J518 flange face)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
L-series up to 210 bar (3000 psi); S-series up to 415 bar (6000 psi). SAE Flange Adapter family — SAE J518 4-bolt flange-on-fitting adapter — JIC, BSP, NPT, weld-tube, or metric on one end; SAE J518 Code 61 (L-series) or Code 62 (S-series) flange head on the other.
Applicable Standards
- SAE J518
- ISO 6162
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 45-elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | JIC 37° UN/UNF (7/16-20 to 1-7/8-12) |
| Port A Sealing | 37-cone |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | SAE J518 Code 61 L-series flange head (1/2" to 2") |
| Port B Sealing | flange-face |
| Port B Gender | flange-face |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/2" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | L-series up to 210 bar (3000 psi); S-series up to 415 bar (6000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J518, ISO 6162 |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-ST-1703-08-08
- End 1
- 1/2" JIC 37° male (3/4-16)
- End 2
- 1/2" Code 61 flange
- Indus part no.IH-ST-1703-12-12
- End 1
- 3/4" JIC 37° male (1-1/16-12)
- End 2
- 3/4" Code 61 flange
- Indus part no.IH-ST-1703-16-16
- End 1
- 1" JIC 37° male (1-5/16-12)
- End 2
- 1" Code 61 flange
- Indus part no.IH-ST-1703-16-24
- End 1
- 1" JIC 37° male (1-5/16-12)
- End 2
- 1-1/2" Code 61 flange
- Indus part no.IH-ST-1703-20-20
- End 1
- 1-1/4" JIC 37° male (1-5/8-12)
- End 2
- 1-1/4" Code 61 flange
- Indus part no.IH-ST-1703-24-24
- End 1
- 1-1/2" JIC 37° male (1-7/8-12)
- End 2
- 1-1/2" Code 61 flange
- Indus part no.IH-ST-1703-32-32
- End 1
- 2" JIC 37° male (2-1/2-12)
- End 2
- 2" Code 61 flange
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the 45° Elbow Flange Connector m JIC X L-series flange and where is it used?▾
How do I read the part number on the 45° Elbow Flange Connector m JIC X L-series flange, such as IH-ST-1703-08-08?▾
Which sizes does the 45° Elbow Flange Connector m JIC X L-series flange come in?▾
Which end sizes pair up on the 45° Elbow Flange Connector m JIC X L-series flange?▾
What working pressure is the 45° Elbow Flange Connector m JIC X L-series flange rated for?▾
What is the 45° Elbow Flange Connector m JIC X L-series flange made from, and is stainless steel available?▾
Which standards does the 45° Elbow Flange Connector m JIC X L-series flange follow?▾
Does the 45° Elbow Flange Connector m JIC X L-series flange come with the flange clamp and bolts?▾
What should I send to order the 45° Elbow Flange Connector m JIC X L-series flange?▾
What port does the 45° Elbow Flange Connector m JIC X L-series flange connect to?▾
How does the 45° Elbow Flange Connector m JIC X L-series flange differ from the 90° Elbow Flange Connector m JIC X L-series flange?▾
Do you stock the 45° Elbow Flange Connector m JIC X L-series flange in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE-Flansch Flansch Außengewinde JIC
- fr
- bride SAE bride mâle JIC
- es
- brida SAE brida macho JIC
- it
- flangia SAE flangia maschio JIC
From the blog
Written about this range
Buying fittings & adapters
SAE flange adapters: Code 61 and Code 62 flange heads, pad adapters and how to choose them
Above 1" and on pump ports, threads give way to four bolts and an O-ring. An SAE flange adapter turns that four-bolt port into a JIC, ORFS, NPTF, ORB or weld connection — in Code 61 to 5,000 psi in small sizes, or Code 62 to 6,000 psi through 2". Flange heads versus flange pad adapters, Code 61 against Code 62, pressure by size, and what an order has to state.
5 min read
Failure analysis
A damaged port: repair it, or is the component scrap?
The fitting is cheap and the thing it screws into is not. How to judge what is in front of you, and the cases where the honest answer is that it is finished.
3 min read
Thread & fitting identification
Hydraulic fittings and adapters: the complete guide to thread families, seats and seals
BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.
6 min read






