Male NPT × Female NPSM Swivel 90° Elbow Adapter

Male NPT × Female NPSM Swivel 90° Elbow Adapter — NPT family 90 elbow for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: 90-elbow
- Port A Thread: NPT taper 1/8" to 2"
- Port A Sealing: npt-taper
- Nominal Size Range: NPT 1/8" to 2"
- Max Working Pressure: up to 350 bar (5000 psi)
- Body Configuration
- 90-elbow
- Port A Thread
- NPT taper 1/8" to 2"
- Port A Sealing
- npt-taper
- Nominal Size Range
- NPT 1/8" to 2"
- Max Working Pressure
- up to 350 bar (5000 psi)
Product description
The 90° Swivel Connector m NPT X f NPSM is a 90° elbow hydraulic adapter in the NPT family. 90° Swivel Connector m NPT X f NPSM — NPT family 90 elbow for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: 90° elbow
- Port A: Male — NPT taper 1/8" to 2" (NPT taper thread (self-sealing))
- Port B: Female swivel — NPSM straight pipe (parallel) 1/8" to 2" (Flat-face seal)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 350 bar (5000 psi). NPT family — ASME B1.20.1 — National Pipe Taper. 60° thread angle (NOT interchangeable with BSPT 55°). PTFE tape or anaerobic sealant required for hydraulic service.
Applicable Standards
- ASME B1.20.1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 90-elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPT taper 1/8" to 2" |
| Port A Sealing | npt-taper |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPSM straight pipe (parallel) 1/8" to 2" |
| Port B Sealing | flat-face |
| Port B Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | NPT 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 350 bar (5000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
28 sizes- Indus part no.IH-AD-NPT-017-04
- Tompkins equivalent
- 1501-04-04
- End 1
- NPT1/4"X18
- End 2
- 1/4"X18
- S1 (mm)
- 14
- S2 (mm)
- 19
- L1 (mm)
- 27.7
- L2 (mm)
- 22.4
- Weight (g)
- 40
- Working pressure (bar)
- 275
- Indus part no.IH-AD-NPT-017-06
- Tompkins equivalent
- 1501-06-06
- End 1
- NPT3/8"X18
- End 2
- 3/8"X18
- S1 (mm)
- 19
- S2 (mm)
- 22
- L1 (mm)
- 31
- L2 (mm)
- 25.1
- Weight (g)
- 69
- Working pressure (bar)
- 210
- Indus part no.IH-AD-NPT-017-08
- Tompkins equivalent
- 1501-08-08
- End 1
- NPT1/2"X14
- End 2
- 1/2"X14
- S1 (mm)
- 22
- S2 (mm)
- 27
- L1 (mm)
- 37.4
- L2 (mm)
- 28.2
- Weight (g)
- 115
- Working pressure (bar)
- 210
- Indus part no.IH-AD-NPT-017-12
- Tompkins equivalent
- 1501-12-12
- End 1
- NPT3/4"X14
- End 2
- 3/4"X14
- S1 (mm)
- 27
- S2 (mm)
- 32
- L1 (mm)
- 40.4
- L2 (mm)
- 33
- Weight (g)
- 190
- Working pressure (bar)
- 170
- Indus part no.IH-AD-NPT-017-16
- Tompkins equivalent
- 1501-16-16
- End 1
- NPT1"X11.5
- End 2
- 1"X11.5
- S1 (mm)
- 33
- S2 (mm)
- 41
- L1 (mm)
- 50
- L2 (mm)
- 39.1
- Weight (g)
- 341
- Working pressure (bar)
- 140
- Indus part no.IH-AD-NPT-017-20
- Tompkins equivalent
- 1501-20-20
- End 1
- NPT1.1/4"X11.5
- End 2
- 1.1/4"X11.5
- S1 (mm)
- 41
- S2 (mm)
- 50
- L1 (mm)
- 60.5
- L2 (mm)
- 44
- Weight (g)
- 631
- Working pressure (bar)
- 80
- Indus part no.IH-AD-NPT-017-24
- Tompkins equivalent
- 1501-24-24
- End 1
- NPT1.1/2"X11.5
- End 2
- 1.1/2"X11.5
- S1 (mm)
- 48
- S2 (mm)
- 55
- L1 (mm)
- 67
- L2 (mm)
- 48
- Weight (g)
- 866
- Working pressure (bar)
- 70
- Indus part no.IH-AD-NPT-017-32
- Tompkins equivalent
- 1501-32-32
- End 1
- NPT2"X11.5
- End 2
- 2"X11.5
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
Show all 28 sizesShow fewer sizes
- Indus part no.IH-AD-NPT-017-2420
- Tompkins equivalent
- 1501-24-20
- End 1
- NPT1.1/2"X11.5
- End 2
- 1.1/4"X11.5
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-2016
- Tompkins equivalent
- 1501-20-16
- End 1
- NPT1.1/4"X11.5
- End 2
- 1"X11.5
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-2012
- Tompkins equivalent
- 1501-20-12
- End 1
- NPT1.1/4"X11.5
- End 2
- 3/4"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1620
- Tompkins equivalent
- 1501-16-20
- End 1
- NPT1"X11.5
- End 2
- 1.1/4"X11.5
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1612
- Tompkins equivalent
- 1501-16-12
- End 1
- NPT1"X11.5
- End 2
- 3/4"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1608
- Tompkins equivalent
- 1501-16-08
- End 1
- NPT1"X11.5
- End 2
- 1/2"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1216
- Tompkins equivalent
- 1501-12-16
- End 1
- NPT3/4"X14
- End 2
- 1"X11.5
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1208
- Tompkins equivalent
- 1501-12-08
- End 1
- NPT3/4"X14
- End 2
- 1/2"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1206
- Tompkins equivalent
- 1501-12-06
- End 1
- NPT3/4"X14
- End 2
- 3/8"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-1204
- Tompkins equivalent
- 1501-12-04
- End 1
- NPT3/4"X14
- End 2
- 1/4"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0812
- Tompkins equivalent
- 1501-08-12
- End 1
- NPT1/2"X14
- End 2
- 3/4"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0806
- Tompkins equivalent
- 1501-08-06
- End 1
- NPT1/2"X14
- End 2
- 3/8"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0804
- Tompkins equivalent
- 1501-08-04
- End 1
- NPT1/2"X14
- End 2
- 1/4"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0612
- Tompkins equivalent
- 1501-06-12
- End 1
- NPT3/8"X18
- End 2
- 3/4"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0608
- Tompkins equivalent
- 1501-06-08
- End 1
- NPT3/8"X18
- End 2
- 1/2"X14
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0604
- Tompkins equivalent
- 1501-06-04
- End 1
- NPT3/8"X18
- End 2
- 1/4"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0406
- Tompkins equivalent
- 1501-04-06
- End 1
- NPT1/4"X18
- End 2
- 3/8"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0402
- Tompkins equivalent
- 1501-04-02
- End 1
- NPT1/4"X18
- End 2
- 1/8"X27
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-0204
- Tompkins equivalent
- 1501-02-04
- End 1
- NPT1/8"X27
- End 2
- 1/4"X18
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
- Indus part no.IH-AD-NPT-017-02
- Tompkins equivalent
- 1501-02-02
- End 1
- NPT1/8"X27
- End 2
- 1/8"X27
- S1 (mm)
- —
- S2 (mm)
- —
- L1 (mm)
- —
- L2 (mm)
- —
- Weight (g)
- —
- Working pressure (bar)
- —
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Tompkins. Tompkins part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is the 90° Swivel Connector m NPT X f NPSM used for and which ports does it connect?▾
What is the part number for NPT1/4-18 × 1/4-18 in the 90° Swivel Connector m NPT X f NPSM?▾
Which sizes of the 90° Swivel Connector m NPT X f NPSM are available?▾
How do I choose the right 90° Swivel Connector m NPT X f NPSM for my port threads?▾
What is the working pressure of the 90° Swivel Connector m NPT X f NPSM?▾
What is the 90° Swivel Connector m NPT X f NPSM made from, and is it suitable for my fluid?▾
Which standards does the 90° Swivel Connector m NPT X f NPSM conform to, and can I get test certificates?▾
What mates with the 90° Swivel Connector m NPT X f NPSM, and which fittings do I pair it with?▾
How does the 90° Swivel Connector m NPT X f NPSM seal, and what should I check when fitting it?▾
What is the Tompkins equivalent of the 90° Swivel Connector m NPT X f NPSM?▾
Where is the 90° Swivel Connector m NPT X f NPSM made, and can you export it from Dubai?▾
Do you stock the 90° Swivel Connector m NPT X f NPSM in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Adapter 90° Bogen NPT Außengewinde auf NPSM Innengewinde
- fr
- adaptateur coude 90° NPT mâle sur NPSM femelle
- es
- adaptador codo 90° NPT macho a NPSM hembra
- it
- adattatore gomito 90° NPT maschio a NPSM femmina
From the blog
Written about this range
Buying fittings & adapters
NPT and NPSM hydraulic adapters: NPTF Dryseal, the 30° swivel seat, ratings — and weld-on adapters
NPT is the one hydraulic thread that seals on the thread, and Parker lists its limits plainly: poor dynamic sealing, ports that can crack, limited remakeability. Yet every pump, filter and gauge on an American machine has one. The steel NPT and NPSM range — nipples, elbows, tees, swivels, plugs and caps — with ratings by size (male and female differ), why an NPSM swivel needs a 30° seat, and the weld-on adapters that put a port on plate.
6 min read
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read








