Skip to content
+971 52 2477942
Lane DXB → JM

Export from Dubai

JM

Hydraulic & industrial hose supplier in Jamaica

Indus Hydraulics ships hydraulic, industrial and slurry hose from Dubai to Jamaica by sea through Suez to Kingston in typically 30–38 days, with Port Esquivel or Montego Bay where the berth suits, or by air into Kingston in 4–7. The file is short: a customs declaration against the invoice and packing list and an attested certificate of origin, with no blanket conformity scheme. What sets this lane apart is alumina refining — hot caustic liquor and abrasive slurry in one circuit — so we quote from concentration, temperature and circuit position, not bore and pressure.

Typical transit
Typically 30–38 days by sea from dispatch
Freight
Sea freight from Jebel Ali through Suez and across the Atlantic to Kingston · Montego Bay and Port Esquivel where the berth suits · Air freight into Kingston where the schedule is tighter
Incoterms 2020
CIF Kingston · DAP to the buyer’s site or plant · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Customs declaration raised by the importer · Chemical compatibility statement for caustic and slurry duty · Certificate of Origin, Dubai Chamber attested · Material and test certificates where the plant specification calls for them
Fig. 01 · Export lane DXB → JMMercator · WGS 84
KINGSTON · PORTKINGSTONPORT ESQUIVELMANDEVILLEOCHO RIOSMONTEGO BAYSAVANNA-LA-MARPORT ANTONIO78°W77°W18°NN50 KMSEA · SUEZ · 16,640 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · suez corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via Suez
Port of entry
Kingston
Transit
30–38 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Jamaica prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Jamaica

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Export quote · JM

Send the part list for Jamaica

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Jamaica

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Jamaica are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL30–38 days
Jebel Ali to Kingston, via SuezDefault for most orders
Air freight4–7 days
DXB to KIN, with connectionsWhen the line is down
Sea, LCL36–48 days
Consolidated, with transhipmentSmall mixed orders

Sequence

How an order to Jamaica works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03For alumina duty the compound is confirmed against caustic concentration, temperature and slurry abrasion rather than pressure alone, because that circuit destroys a general-purpose hose.
  4. 04Goods sail from Jebel Ali through Suez and across the Atlantic to Kingston, and you get the paperwork and tracking together.

Industries

Who we supply in Jamaica

Delivery coverage

Cities and sites we deliver to in Jamaica

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Kingston

    Surrey

  • Spanish Town

    Middlesex

  • Port Esquivel

    Middlesex

  • Mandeville

    Middlesex

  • Nain

    Middlesex

  • May Pen

    Middlesex

  • Ocho Rios

    Middlesex

  • Discovery Bay

    Middlesex

  • Montego Bay

    Cornwall

  • Falmouth

    Cornwall

  • Savanna-la-Mar

    Cornwall

  • Port Antonio

    Surrey

Questions we get asked

Supplying Jamaica, in detail

01

How many weeks should a Jamaican plant allow for a sea shipment from Dubai?

Typically 30–38 days by sea from dispatch for a full container from Jebel Ali through Suez and across the Atlantic to Kingston. LCL runs 36–48 days, consolidated and transhipped, which suits small mixed orders rather than an outage date. Air freight from DXB to Kingston takes 4–7 days with connections when a line is down and the plant cannot wait.

02

Can you supply hose for the caustic and slurry circuits of an alumina refinery?

Yes, and it is the reason most Jamaican enquiries reach us. Caustic liquor, heat and abrasive slurry in one circuit will destroy a general-purpose hose in weeks — a compound chosen for hydraulic oil is the wrong compound there. Tell us the concentration, the temperature and where in the circuit the assembly sits, and we specify against it and say plainly where a catalogue item is unsuitable.

03

Why should aluminium quick-couplings be kept out of Bayer-process lines?

Because aluminium is attacked by caustic outright, and it turns up in fittings and quick-couplings where nobody expected chemistry to matter. Hot caustic is also far more aggressive than the ambient figure a compatibility table gives. Give us the sodium hydroxide concentration and the operating temperature, not just the chemical name, and we specify tube, cover and end fittings against all three.

04

Our cargo is going through Kingston — will it be imported or transhipped?

That depends on where it is going, and it is worth saying which at quotation. Kingston transhipes a great deal that never enters Jamaica. If your goods are staying, the importer raises the customs declaration through Jamaica Customs before arrival; if they are staging onward, the file is documented that way from the outset rather than imported and re-exported.

05

Is a conformity certificate required to import industrial hose into Jamaica?

No — there is no blanket pre-shipment conformity scheme for industrial hose and fittings. The file is the customs declaration raised by the importer through Jamaica Customs, the invoice and packing list, the Dubai Chamber attested certificate of origin and the bill of lading or air waybill. For caustic and slurry duty we add a compatibility statement, and material and test certificates where the plant specification calls for them.

06

Can you deliver DAP to the refineries in Clarendon and at Ewarton?

Yes, on DAP terms to the plant gate — the Clarendon refinery, Ewarton in St Catherine, or the Nain site in St Elizabeth. The road leg from Kingston, or from Port Esquivel where the berth suits, is priced with the order rather than estimated. Give us the gate and the receiving contact with the enquiry and both go on the file before dispatch.

07

Why source alumina-plant hose from Dubai rather than Florida?

For a standard item, Florida is closer and often the right answer. What we hold is the caustic and slurry specification as stock rather than as a special order, and on a plant with a shutdown calendar that is worth more than the freight difference. A consignment planned against the outage lands with the compound, couplings and documents settled.

08

Should we batch our orders around the refinery shutdown calendar?

Yes. On a five-week lane, one consolidated consignment planned against the shutdown calendar lands far better than several small ones ordered as items fail: compound and coupling choices are settled once, documents are raised once, and the assemblies arrive before the outage rather than during it. Send the outage date with the line list and we work back from it.

09

Which Jamaican ports can you ship to besides Kingston?

Kingston is the default port of entry, with Port Esquivel and Montego Bay used where the berth suits the delivery. Port Esquivel sits close to the St Catherine and Clarendon bauxite and alumina operations; Montego Bay serves the north-west. Whichever port is chosen, the road leg to site is priced with the order on DAP terms, and the file is raised against that port.

10

Can you match the fittings on bauxite haul trucks and loaders exactly?

Yes. Send the existing fitting identification — thread form, seat angle and sealing method — or the machine model, and we match it, whether JIC, ORFS, BSP or metric, rather than substituting a near-equivalent. Hose is supplied to SAE J517, EN 853/856 or ISO 18752 constructions as the machine requires, and abrasion-resistant covers are worth specifying where lines rub in the bauxite pits.

Next step

Shipping to Jamaica?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · JM

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets