Skip to content
+971 52 2477942
Lane DXB → CR

Export from Dubai

CR

Hydraulic & industrial hose supplier in Costa Rica

Indus Hydraulics ships hydraulic and industrial hose equipment from Dubai to Costa Rica by sea through Suez to Moín in typically 33–41 days, via Caldera on the Pacific for western deliveries, or by air into San José in 4–8, on a Spanish document set with an attested certificate of origin. Almost all of the country's electricity comes from hydro, geothermal and wind, so much of what we ship is governor and wicket-gate hydraulics ordered against a planned outage. The rest serves packing and precision manufacturing, where washdown, food contact and cleanrooms matter more than pressure.

Typical transit
Typically 33–41 days by sea from dispatch
Freight
Sea freight from Jebel Ali through Suez and across the Atlantic to Moín · Caldera on the Pacific where the delivery is western · Air freight into San José where the schedule is tighter
Incoterms 2020
CIF Moín · DAP to the buyer’s site or plant · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Customs declaration raised by the importer · Food-contact documentation where the line is for a packing plant · Certificate of Origin, Dubai Chamber attested · Documents in Spanish
Fig. 01 · Export lane DXB → CRMercator · WGS 84
MOÍN · LIMÓNLIMÓNSAN JOSÉALAJUELACALDERALIBERIAGUÁPILESSAN ISIDRO86°W85°W84°W83°W82°W8°N9°N10°N11°NN100 KMSEA · SUEZ · 17,540 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · suez corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via Suez
Port of entry
Moín · Limón
Transit
33–41 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Costa Rica prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Costa Rica

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Export quote · CR

Send the part list for Costa Rica

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Costa Rica

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Costa Rica are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL33–41 days
Jebel Ali to Moín, via SuezDefault for most orders
Air freight4–8 days
DXB to SJO, with connectionsWhen the line is down
Sea via Caldera35–45 days
Pacific coast, transhippedWestern deliveries

Sequence

How an order to Costa Rica works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03For generation plant the maintenance window is confirmed and the order set against it; for packing lines the food-contact and washdown requirements are settled before the compound is chosen.
  4. 04Goods sail from Jebel Ali through Suez and across the Atlantic to Moín, and you get the paperwork and tracking together.

Industries

Who we supply in Costa Rica

Delivery coverage

Cities and sites we deliver to in Costa Rica

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Moín

    Limón

  • Limón

    Limón

  • San José

    San José

  • Alajuela

    Alajuela

  • Cartago

    Cartago

  • Heredia

    Heredia

  • Caldera

    Puntarenas

  • Puntarenas

    Puntarenas

  • Liberia

    Guanacaste

  • Guápiles

    Limón

  • Siquirres

    Limón

  • San Isidro

    San José

Questions we get asked

Supplying Costa Rica, in detail

01

Is air freight to San José worth it, or should we plan on sea to Moín?

Plan on sea for anything scheduled: a full container from Jebel Ali to Moín via Suez typically takes 33–41 days from dispatch, and routing via Caldera for western deliveries 35–45 days. Air freight from DXB to San José takes 4–8 days with connections and is for the line that is down. On a lane where most work is planned to an outage, sea is the norm.

02

Can you supply hydraulics for Costa Rican hydro and geothermal plant?

Yes, and it is most of what this lane carries. A plant that runs continuously is maintained to a window rather than to failure, so the useful order is placed against the outage schedule. Tell us the window and we will land ahead of it rather than during it — an urgent shipment here usually means a date was missed, not that something broke.

03

Can you supply hose for food-contact packing lines in Costa Rica?

Where the line requires it, tell us at quotation and we will state exactly what a compound carries. We supply industrial hose and fittings and will document what we can evidence; we do not certify an assembly as food-contact compliant on our own authority. Saying so at quotation is more useful than a claim that has to be withdrawn once the line is in validation.

04

What hose cover suits equipment inside a medical-device cleanroom?

A smooth cover that can be wiped down, not a textile braid, which holds particulate and cannot be properly cleaned. Fluids and greases must also be compatible with the cleaning regime, and anything that migrates or outgasses is a problem however well it lubricates. These constraints rarely appear in a hydraulic specification and tend to surface at validation, so tell us the environment at quotation.

05

What paperwork clears industrial hose through Costa Rican customs?

A customs declaration raised by the importer through the customs administration, with no blanket pre-shipment conformity scheme for industrial hose and fittings. Alongside it go the invoice, a packing list in Spanish that matches the declaration, and the Dubai Chamber attested certificate of origin. For washdown and food-contact lines we add compound documentation at quotation.

06

When does it make sense to route through Caldera instead of Moín?

Moín for almost everything — it is the container gate and it is closer to the Central Valley. Caldera on the Pacific for Guanacaste and western deliveries, where the road leg from Moín would otherwise cross the country; that routing is transhipped and takes 35–45 days. The file is raised against one port, so name the delivery point at quotation.

07

Can you deliver to banana and pineapple packhouses?

Yes, on DAP terms to the packhouse. The road leg from Moín into the Caribbean lowlands around Siquirres and Guápiles is short, and it is priced with the order rather than estimated. Tell us at quotation which lines are washdown or food-contact, because those decide the compound before the bore and pressure do.

08

Does the packing list for a Costa Rican import need to match the declaration?

Yes, and in Spanish: the description has to agree across the invoice, the packing list and the declaration the importer lodges. We prepare the Spanish packing list before the vessel sails so the declaration can be raised before arrival, and a consistent description is what keeps a container moving through Moín rather than waiting for a query.

09

Do you supply hose and valves for geothermal plant in Guanacaste?

For maintenance around geothermal plant, yes — but steam and hot brine service is specified line by line. Temperature, pressure and fluid chemistry decide whether hose is appropriate at all or whether hard piping and valves are the right answer, so give us the duty for each line and we will say plainly where a catalogue item is unsuitable rather than supplying to the dimensions.

10

Do you supply excavator and crane hose for highway works on the Limón corridor?

Yes — hose assemblies, fittings and adapters for excavators, cranes, pavers and batching plant, made up in Dubai to the lengths and end fittings on your list. For contractors on the San José–Limón corridor, Moín is the natural port and the road leg to site is priced on DAP terms. Send the machine models and fitting identification and we match what is fitted.

Next step

Shipping to Costa Rica?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · CR

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets