Lane DXB → BO

Export from Dubai

Hydraulic & industrial hose supplier in Bolivia

Indus Hydraulics ships hydraulic hose, fittings, valves and industrial hose from Dubai to Bolivia by sea to Arica or Iquique in Chile, then under Chilean bond by road to the Bolivian border, with air freight to Santa Cruz or La Paz, and a Dubai Chamber attested certificate of origin. Two customs files travel with every load and must agree line for line. Most sites sit above three thousand metres, so altitude is part of the specification, not a footnote.

Typical transit: Typically 45–58 days from dispatch, sea to Arica or Iquique plus bonded road · 52–68 days LCL · Air freight 6–10 days to Santa Cruz or La Paz
Freight: Sea freight from Jebel Ali round the Cape and through the Panama Canal to Arica or Iquique, then bonded road over Tambo Quemado · Air freight into Santa Cruz or La Paz where the schedule is tighter
Incoterms 2020: DAP to the buyer’s site · CIF Arica · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation: Chilean transit documents for the bonded move · Bolivian customs declaration raised by the importer · Certificate of Origin, Dubai Chamber attested · Documents in Spanish

Request an export quote WhatsApp us Email sales@indushydraulics.me

Fig. 01 · Export lane DXB → BOMercator · WGS 84

Border crossingDelivery citysea + road corridor from JEBEL ALI · DXB

Origin: Jebel Ali · Dubai
Primary mode: Sea + road
Border crossing: Tambo Quemado · Chungará
Transit: 45–58 days
Quoted in: USD
Docs prepared: Before the vessel sails

Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Bolivia prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Bolivia

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp

Hoses & Fittings supplier in Bolivia

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front

Industrial Hoses supplier in Bolivia

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges

A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block

Lifting & Rigging supplier in Bolivia

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges

A group of oilfield hoses — a coiled rotary drilling hose with a forged coupling, an armoured flexible line with a flange end and a red hose with a hammer union, a safety clamp in front

Oil & Gas Hoses supplier in Bolivia

5 ranges

Specialty hoses for upstream oil & gas — drilling, well control, well service / intervention, tensioner / compensator, and low-pressure oilfield service. Continental ContiTech and Gates.

A group of Molykote lubricant packaging — a steel drum and a plastic pail behind, paste tins, a grease cartridge, two tubs and a sachet arranged in front on a studio backdrop

Lubricants supplier in Bolivia

6 ranges

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve

Oilfield Valves supplier in Bolivia

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges

A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front

Flow Iron & Wellhead supplier in Bolivia

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges

A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body

Valves & Manifolds supplier in Bolivia

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front

Blowout Preventers (BOP) supplier in Bolivia

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box

Instrumentation & Controls supplier in Bolivia

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges

A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid

Well Testing Equipment supplier in Bolivia

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges

$A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side$

Fracturing Equipment supplier in Bolivia

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges

A skid-mounted cementing unit with twin triplex pumps, mixing and displacement tanks and a control cabin

Cementing Equipment supplier in Bolivia

7 ranges

Skid-, trailer- and truck-mounted cementing packages — single & multiplex skid, ATEX/Zone 2, CE & GOST options, automatic density control, data acquisition.

A skid-mounted triplex mud pump with its electric motor, beside a mud manifold of gate valves on a frame

Drilling & Workover Systems supplier in Bolivia

7 ranges

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

A skid-mounted stimulation pumping unit with a diesel engine, a triplex pump and a blending tank

Stimulation Equipment supplier in Bolivia

5 ranges

Acid / N₂ stimulation packages — nitrogen pumping units, transfer pumps, acid tanks, stimulation batch mixers and pumping units. ATEX, CE, GOST.

A group of hydraulic pumps on a studio backdrop — a variable-displacement axial piston pump with its swashplate control head, an external gear pump, a vane pump cartridge, and a splined drive shaft and cover plate laid in front

Hydraulic Pumps supplier in Bolivia

7 ranges

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

A group of hydraulic power-unit accessories — a blue bladder accumulator, a return-line filter housing with its pleated element stood alongside, a perforated suction strainer and a lever ball valve, with O-rings, rod seals, a back-up ring and a wear ring laid in front

Seals & Accessories supplier in Bolivia

4 ranges

Hydraulic power unit accessories — HYDAC Betamicron 10 µm pressure and return-line filter elements, and HYDAC SB330 bladder accumulators in 4 and 10 litre sizes for 330 bar.

A group of double-acting hydraulic cylinders — a tie-rod cylinder with its chrome rod part extended, a heavy welded cylinder with a bronze-bushed clevis eye, a short flange-mount cylinder, and a rod eye, mounting bracket and clevis pin in front

Hydraulic Cylinders supplier in Bolivia

4 ranges

Double-acting hydraulic cylinders — Bosch Rexroth CDT3 tie-rod cylinders to ISO 6020-2 (160 bar), configured by bore, rod, stroke and mounting, such as 63/45 × 200 mm with clevis mounting and 100/70 × 500 mm with foot mounting.

A group of hydraulic motors — three black orbital motors with SAE A, square and wheel-mount flanges and keyed, tapered and splined shafts, and a cast-iron gear motor, with a splined shaft and O-rings in front

Hydraulic Motors supplier in Bolivia

2 ranges

Low-speed high-torque orbital motors and gear motors from Fluidyne, Dynamic Fluid Components, Char-Lynn and Cross, listed by series with every part number.

A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets

Hydraulic Tools & Bolting supplier in Bolivia

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Lay flat hose coils in blue, red, yellow and green, a black roll in a steel frame, suction hose, camlock coupling and clamp

Lay Flat Hoses supplier in Bolivia

7 ranges

TPU, NBR and PVC lay flat hoses for dewatering, frac water, well risers, fuel, drinking water, concrete and slurry, jacketed fire hose, and suction hose for the pump side.

Export quote · BO

Send the part list for Bolivia

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

Standards

Standards we supply and certify against for Bolivia

Standard	Types	Applies to
EN 853	1SN · 2SN	Wire-braid hydraulic hose
EN 856	4SP · 4SH	Spiral-wire hydraulic hose
EN 857	1SC · 2SC	Compact wire-braid hose
SAE J517	100R1 · R2 · R12 · R13 · R15	SAE hydraulic hose series
ISO 18752	Grades A–D	Performance-based hose classification
API 16C	Choke & kill	Well control flexible lines
API 7K	Rotary & vibrator	Drilling hose
API 6A	PSL 1–4	Wellhead equipment
DIN 2353	L · S series	Bite-type tube couplings
ISO 8434-1	24° cone	Metric tube connections
ISO 6162 / 12151	Code 61 · 62	SAE flange and hose connections
EN 14420-5	Clamped	Industrial hose couplings
NACE MR0175	ISO 15156	Sour-service materials
ISO 9001:2015	Certified	Quality management system

Customs

Tariff lines we declare under

4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
7307.91Flanges, iron or steelSAE and API flanges
7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
8413.60Rotary positive displacement pumpsGear and vane pumps
8412.21Hydraulic power engines, linear actingCylinders
3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Bolivia are declared under.

Freight

Three ways in, priced per shipment

Sea + road45–58 days

Arica or Iquique, then bonded over Tambo QuemadoDefault for most orders

Air freight6–10 days

DXB to VVI or LPB, with connectionsWhen the line is down

Sea + road, LCL52–68 days

Consolidated to Arica, then roadSmall mixed orders

Sequence

How an order to Bolivia works

01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
03The Chilean transit documents for the bonded move are raised alongside the Bolivian declaration, and the site altitude is confirmed so the specification is checked against it.
04Goods sail to Arica and climb over Tambo Quemado, and you get the paperwork and tracking together.

Industries

Who we supply in Bolivia

mining

Mining in Bolivia

Silver, zinc, lead and tin on the altiplano around Oruro and Potosí, including San Cristóbal, and lithium on the Salar de Uyuni — hose and fittings specified for altitude, dust and high cycle counts.

Industry page

A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset

oil · gas

Oil & Gas in Bolivia

Gas field, processing and compressor-station support in Tarija and the southern Chaco basin, and pipeline and export infrastructure towards Yacuiba — valves, flow equipment and fittings.

Industry page

Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath

power

Power & Energy in Bolivia

Actuator and governor hydraulics for gas-fired thermal plant in the lowlands, hydro in the Andean valleys and generation serving the mines.

Industry page

construction

Construction in Bolivia

Excavator, crane and batching-plant hydraulics for highway, mine development and building works between La Paz, El Alto, Cochabamba and Santa Cruz.

Industry page

steel

Steel & Metals in Bolivia

Cylinders, valves and hose assemblies for tin smelting and concentrator plant around Oruro and Potosí, and fabrication shops in Santa Cruz and Cochabamba.

Industry page

A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon

marine

Marine & Offshore in Bolivia

Winch, crane and deck hydraulics for river barges and lifting equipment on the eastern waterways — a small sector; most Bolivian demand is mining and gas.

Industry page

Delivery coverage

Cities and sites we deliver to in Bolivia

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

Santa Cruz
Santa Cruz
La Paz
La Paz
El Alto
La Paz
Oruro
Oruro
Cochabamba
Cochabamba
Potosí
Potosí
Sucre
Chuquisaca
Tarija
Tarija
Uyuni
Potosí
San Cristóbal
Potosí
Montero
Santa Cruz
Yacuiba
Tarija

Questions we get asked

Supplying Bolivia, in detail

Why does Bolivia take longer than any other lane you run?

Because it is the Pacific lane plus a mountain. The sea leg to Arica or Iquique runs round the Cape of Good Hope and through the Panama Canal, and a bonded road leg then climbs to about four and a half thousand metres before it reaches a Bolivian customs office. Door to door that is typically 45 to 58 days from dispatch for a full load.

Which documents clear a bonded consignment through Chile into Bolivia?

Two declarations that must agree line for line: the Chilean transit declaration for the bonded move, raised by the forwarder at Arica or Iquique, and the Bolivian import declaration filed by the importer through Aduana Nacional. Neither country applies a general pre-shipment conformity scheme to industrial hose and fittings. A Spanish packing list matching both declarations and a Dubai Chamber attested certificate of origin complete the file.

Should the container discharge at Arica or Iquique?

Whichever has the better sailing for the order and suits the delivery point. Arica connects by road to La Paz over Tambo Quemado and is the default; Iquique is used when its schedule lands better. We confirm the port, the border crossing and the bonded road leg with the forwarder at quotation, so the Chilean transit file is raised for the right route.

How long does delivery to La Paz, Oruro or Santa Cruz take?

Typically 45 to 58 days from dispatch for a full load by sea and bonded road, and 52 to 68 days for consolidated LCL. Air freight from Dubai to Santa Cruz (VVI) or La Paz (LPB) takes 6 to 10 days with connections and suits a single critical assembly when a line is down. Lowland sites around Santa Cruz are often better served by air than altiplano ones.

Why does a pump suction line cavitate at El Alto or Potosí when it ran fine at sea level?

Because there is less atmospheric pressure pushing fluid into the pump inlet at altitude. A suction line that works at sea level can cavitate at four thousand metres, showing as pitting and noise rather than a leak. The fix is on the inlet side: a larger bore than the calculation suggests, the shortest practical run, fewer fittings, and suction hose that will not collapse under the higher vacuum.

Does altitude change what you supply for Bolivian sites?

It changes what we recommend, and it should. Most Bolivian industrial sites sit between three and four and a half thousand metres, where seal compounds, cooling capacity and cycle life all behave differently from the datasheet. Tell us the site and its altitude at quotation, and we flag where a standard specification is the wrong choice rather than supplying to the letter of the part number.

Can you deliver to mines beyond Oruro and Potosí?

Yes, on DAP terms to the mine gate, including sites towards Uyuni and San Cristóbal. The leg beyond Oruro or Potosí is quoted rather than estimated, because these are real roads at real altitude with limited services. CIF Arica is also available if your own forwarder manages the bonded move and the Bolivian entry.

Is it worth consolidating several orders into one Bolivian consignment?

Strongly. On a lane this long, one consolidated consignment under a single transit declaration lands far better than several small ones, each carrying its own border risk at a crossing four and a half thousand metres up. Group the planned consumables for a quarter or a shutdown, and keep air freight for the genuine emergency.

Do you supply valves and flow equipment for the Tarija gas fields?

Yes. We supply TechnipFMC, Cameron (SLB), SPM, Anson, Stream-Flo and WOM equipment — gate and check valves, flow iron and wellhead components — together with hose and fittings for compressor stations and processing plant in Tarija and the southern basin. Send the API specification, pressure class and end connections, and material and test certificates are supplied where the specification requires them.

Can you supply lithium and brine operations on the Salar de Uyuni?

Yes — industrial and transfer hose, valves, fittings and hydraulic hose for pumping, brine handling and mobile plant. Brine and salt attack fittings and covers as much as pressure does, and the site sits at about three and a half thousand metres, so tell us the medium, temperature and altitude, and we specify materials and compounds against them at quotation.

How do we place an order from Bolivia?

Send the part list or hose markings, the site and its altitude, the delivery town and your preferred Incoterm: DAP to site, CIF Arica, FOB Jebel Ali or EXW Dubai. We quote in US dollars, which also avoids a second conversion at the Chilean transit stage, and agree the Spanish descriptions so both customs declarations match.

Next step

Shipping to Bolivia?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp us Email the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · BO

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets

South America

Chile PeruBolivia — this pageArgentina Colombia Ecuador Guyana Suriname Brazil Venezuela Paraguay Uruguay