Skip to content
+971 52 2477942
Lane DXB → DORepública Dominicana

Export from Dubai

DO

Hydraulic & industrial hose supplier in the Dominican Republic

Indus Hydraulics ships hydraulic, industrial and mining equipment from Dubai to the Dominican Republic by sea through Suez to Caucedo in typically 30–38 days, with Haina and Puerto Plata where the berth suits, or by air into Santo Domingo in 4–7. The first question is which side of the free-zone line the consignee sits: a zone admission and a DGA import entry are different files, and converting one into the other after arrival is expensive. Demand comes from gold and ferronickel mining, cement, power and the processing plants behind the zones.

Typical transit
Typically 30–38 days by sea from dispatch
Freight
Sea freight from Jebel Ali through Suez and across the Atlantic to Caucedo · Haina and Puerto Plata where the berth suits · Air freight into Santo Domingo where the schedule is tighter
Incoterms 2020
CIF Caucedo · DAP to the buyer’s site or zone · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Customs declaration, or free-zone admission where the consignee is a zone operator · Certificate of Origin, Dubai Chamber attested · Documents in Spanish · Material and test certificates where the specification calls for them
Fig. 01 · Export lane DXB → DOMercator · WGS 84
CAUCEDO · PORTSANTO DOMINGOSANTIAGOPUERTO PLATALA ROMANABONAOBARAHONA72°W71°W70°W69°W18°N19°N20°NN50 KMSEA · SUEZ · 15,890 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · suez corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, via Suez
Port of entry
Caucedo
Transit
30–38 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for the Dominican Republic prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to the Dominican Republic

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges

Specialty hoses for upstream oil & gas — drilling, well control, well service / intervention, tensioner / compensator, and low-pressure oilfield service. Continental ContiTech and Gates.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Skid-, trailer- and truck-mounted cementing packages — single & multiplex skid, ATEX/Zone 2, CE & GOST options, automatic density control, data acquisition.

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

Double-acting hydraulic cylinders — Bosch Rexroth CDT3 tie-rod cylinders to ISO 6020-2 (160 bar), configured by bore, rod, stroke and mounting, such as 63/45 × 200 mm with clevis mounting and 100/70 × 500 mm with foot mounting.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

TPU, NBR and PVC lay flat hoses for dewatering, frac water, well risers, fuel, drinking water, concrete and slurry, jacketed fire hose, and suction hose for the pump side.

Export quote · DO

Send the part list for the Dominican Republic

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for the Dominican Republic

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to the Dominican Republic are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL30–38 days
Jebel Ali to Caucedo, via SuezDefault for most orders
Air freight4–7 days
DXB to SDQ, with connectionsWhen the line is down
Sea, LCL36–48 days
Consolidated, with transhipmentSmall mixed orders

Sequence

How an order to the Dominican Republic works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Whether the consignee is a free-zone operator or a domestic importer is settled first, because the two are different files and converting one into the other after arrival is expensive.
  4. 04Goods sail from Jebel Ali through Suez and across the Atlantic to Caucedo, and you get the paperwork and tracking together.

Industries

Who we supply in the Dominican Republic

Delivery coverage

Cities and sites we deliver to in the Dominican Republic

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Santo Domingo

    Distrito Nacional

  • Caucedo

    Santo Domingo

  • Haina

    San Cristóbal

  • Santiago

    Santiago

  • Puerto Plata

    Puerto Plata

  • La Romana

    La Romana

  • San Pedro de Macorís

    San Pedro

  • Bonao

    Monseñor Nouel

  • Barahona

    Barahona

  • La Vega

    La Vega

  • San Francisco de Macorís

    Duarte

  • Higüey

    La Altagracia

Questions we get asked

Supplying the Dominican Republic, in detail

01

How long from dispatch in Dubai until cargo reaches Caucedo?

Typically 30–38 days by sea from dispatch for a full container through Suez and across the Atlantic. LCL runs 36–48 days because it is consolidated and transhipped, which suits small mixed orders. Air freight from DXB to Las Américas in Santo Domingo takes 4–7 days with connections, for the machine that is stopped and cannot wait for a vessel.

02

Our plant is in a Dominican free zone — does that change the shipment?

Yes, and it is the first thing to settle. Goods admitted to a zone have not entered the country's customs territory, so the file is a free-zone admission arranged with the zone operator rather than an import entry through the DGA. The duty treatment differs too. Converting one into the other after arrival is expensive, so tell us at quotation which applies.

03

Who should be named as consignee on a Dominican shipment?

The free-zone operator, if the goods are for a zone manufacturer, or the domestic importer who will raise the DGA declaration — and it must be settled before the container is loaded. The consignee decides whether the file is a zone admission or an import entry, and converting between them after arrival costs time and duty. Tell us at quotation and the documents are raised to match.

04

Is there a conformity scheme industrial hose must pass before entering the Dominican Republic?

No — there is no blanket pre-shipment conformity scheme for industrial hose and fittings. The file is the DGA declaration or the zone admission, the invoice and a packing list in Spanish that matches it, and the Dubai Chamber attested certificate of origin. Material and test certificates are added where the specification calls for them, and we confirm the full set at quotation.

05

How should the invoice and packing list read for a DGA declaration?

In Spanish, with the product description agreeing across the invoice, the packing list and the declaration the importer raises through the DGA. We prepare the Spanish packing list before the vessel sails so the declaration can be lodged before arrival. For a zone consignee the same consistency applies to the free-zone admission — a mismatched description is the commonest reason a container waits.

06

Can you deliver to the Bonao ferronickel plant?

Yes, on DAP terms to the plant gate. The road leg north from Caucedo past Santo Domingo is priced with the order rather than estimated. For furnace and materials-handling duty, give us the temperature and abrasion conditions along with the bore and pressure, because a hose rated for the pressure alone is rarely what survives a ferronickel plant.

07

Do you supply hose and fittings for the gold-mining fleets around Cotuí?

Yes — hose assemblies, fittings and adapters for haul trucks, loaders, drills and processing-plant maintenance in the Sánchez Ramírez gold district, made up in Dubai to the lengths and end fittings on your list. Delivery is DAP to the site gate, with the road leg from Caucedo or Haina priced with the order, and material and test certificates added where the specification calls for them.

08

Is Caucedo the right port if our cargo continues to another Caribbean island?

Often, yes. Caucedo tranships for the wider Caribbean as well as serving the Dominican Republic, so cargo staging onward should be documented as staging from the outset rather than imported and re-exported. Tell us the final destination at quotation, and the file and the packing are prepared for the onward leg rather than for Dominican entry.

09

Is Dubai competitive with Florida suppliers for Dominican mines and plants?

For a standard item, Florida is closer and often right. What we hold is the pattern or the duty-specific compound as stock — for a mine or plant with a shutdown calendar that is worth more than the freight difference. A consolidated consignment planned five weeks ahead also lands with its Spanish documents complete, which matters as much as the parts.

10

What spares should a Dominican plant hold before hurricane season?

A modest buffer of the assemblies that fail most often, ordered well before the season, because a storm can create the repair work and disrupt resupply in the same week. The useful list is rarely exotic: standard lengths for the machines that matter, a spread of common adapters, and the couplings damaged when equipment is moved in a hurry. Send what you have been buying and we help build it.

11

Which lifting gear do you supply for Dominican port and construction work?

Wire rope and synthetic slings, shackles, hooks and chain fittings, each with the manufacturer's test certificate and the working load limit marked, for terminal, crane and resort-construction lifting. Any inspection the site or terminal requires on receipt is confirmed at quotation. Rigging can travel in the same container as the hydraulics, under one Spanish document set.

Next step

Shipping to the Dominican Republic?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · DO

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets

North America & Caribbean