Skip to content
Lane DXB → PG

Export from Dubai

PG

Hydraulic & industrial hose supplier in Papua New Guinea

Papua New Guinea is the far end of the network: sea out of Jebel Ali through the Strait of Malacca, transhipped at Singapore onto a feeder for Lae or Port Moresby, four to six weeks to the quay. Most of the country’s mines and its LNG upstream sit inland or on islands with no road to either port, so the leg after the quay is planned with the order, and a consolidated consignment is worth more here than almost anywhere else we ship.

Typical transit
Typically 28–38 days by sea from dispatch
Freight
Sea freight from Jebel Ali to Lae or Port Moresby, transhipped at Singapore · Air freight into Port Moresby where the schedule is tighter, via Singapore or Brisbane
Incoterms 2020
CIF Lae or Port Moresby · FOB Jebel Ali · EXW Dubai for a nominated forwarder · DAP where the inland leg can be committed
Documentation
Customs entry filed by the importer · ISPM 15 treated timber packing, checked by NAQIA on arrival · Certificate of Origin, Dubai Chamber attested · Material and test certificates where the contract calls for them
Fig. 01 · Export lane DXB → PGMercator · WGS 84
LAE · PORTPORT MORESBYMADANGMOUNT HAGENTABUBILWEWAKALOTAUKOKOPOLIHIR145°E150°E155°E10°S5°SN200 KMSEA · TRANSHIP · 12,810 KM · FROM JEBEL ALI · DXB
Port of entryDelivery citysea · tranship corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea, transhipped
Port of entry
Lae · Port Moresby
Transit
28–38 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Papua New Guinea prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 26 clusters · 409 ranges

What we supply to Papua New Guinea

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 39 Industrial Hoses ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 39 Lifting & Rigging ranges

Industrial specialty lubricants — greases, pastes, compounds, anti-friction coatings, and oils for hydraulic, bearing, gear, and assembly service.

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Skid-, trailer- and truck-mounted cementing packages — single & multiplex skid, ATEX/Zone 2, CE & GOST options, automatic density control, data acquisition.

Drilling & workover packaged systems — mud pump packages, mud manifolds, degassers, mud / workover tanks, liquid mud plants, and mobile labs / workshops.

Axial piston, vane and gear hydraulic pumps — Bosch Rexroth A10VSO variable displacement from 45 to 100 cm³/rev and the PGH4 internal gear pump, with Parker T6C and T7B fixed-displacement vane pumps for machine-tool duty.

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

TPU, NBR and PVC lay flat hoses for dewatering, frac water, well risers, fuel, drinking water, concrete and slurry, jacketed fire hose, and suction hose for the pump side.

Planetary and slewing gearboxes, wheel drives, winch drives, motorized drums and hydraulic hoisting and recovery winches from Dinamic Oil of Italy, supplied by Indus Hydraulics as authorised distributor, direct from the factory.

Gate, globe, check, ball, butterfly, cryogenic, control and safety valves to API 600, 602, 6D, 594 and 609 and ASME B16.34, NPS 1/2" to 88", Class 150 to 4500.

Pneumatic cylinders, air valves and manifolds, FRL air preparation, tubing, fittings, grippers, vacuum and air motors from Parker, SMC, Wilkerson, Norgren, ARO, Destaco and other makers.

Anchor chain in Grades U1 to U3 and offshore mooring chain in ORQ and R3 to R5, joining shackles and swivels, ship and offshore anchors, chasers, deck fittings and mooring buoys — each size under an Indus part number, supplied from Dubai with class certificates on request.

Finned tubes for air coolers, economisers and fired heaters; seamless carbon, alloy and stainless boiler and heat-exchanger tubes; U-bend tubes; copper, brass and copper-nickel condenser tubes; and the tube sheets, baffles and exchangers they go into. Each size has an Indus part number, with mill test certificates on request.

Show all 36 Seamless Finned Tubes ranges

Export quote · PG

Send the part list for Papua New Guinea

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Papua New Guinea

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Papua New Guinea are declared under.

Freight

Three ways in, priced per shipment

Sea, FCL28–38 days
Jebel Ali to Lae, via SingaporeDefault for most orders
Air freight4–7 days
DXB to POM, via SIN or BNEWhen the line is down
Sea, LCL32–45 days
Consolidated, with transshipmentSmall mixed orders

Sequence

How an order to Papua New Guinea works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, the order is packed on ISPM 15 treated timber and the onward leg beyond Lae or Port Moresby is agreed against how the site is actually supplied.
  4. 04Goods sail from Jebel Ali and change ship at Singapore, and you get the paperwork and tracking together.

Industries

Who we supply in Papua New Guinea

Delivery coverage

Cities and sites we deliver to in Papua New Guinea

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

16 locations listed

  • Lae

    Morobe

  • Port Moresby

    National Capital District

  • Madang

    Madang

  • Goroka

    Eastern Highlands

  • Kainantu

    Eastern Highlands

  • Mount Hagen

    Western Highlands

  • Tari

    Hela

  • Porgera

    Enga

  • Tabubil

    Western

  • Kiunga

    Western

  • Wewak

    East Sepik

  • Popondetta

    Oro

  • Alotau

    Milne Bay

  • Kimbe

    West New Britain

  • Kokopo

    East New Britain

  • Lihir

    New Ireland

Questions we get asked

Supplying Papua New Guinea, in detail

01

Do you have a branch in Papua New Guinea?

No. Papua New Guinea is supplied from our Dubai warehouse by sea into Lae or Port Moresby, transhipped at Singapore, with the documents prepared before the vessel sails.

02

Lae or Port Moresby?

Lae for the Highlands and most mining and LNG supply, because the Highlands Highway starts there. Port Moresby for the capital and the south coast, which has no road link to Lae.

03

Why transship at Singapore?

Because no mainline service runs from the Gulf to Papua New Guinea. Containers change ship at Singapore onto a feeder, and the feeder schedule, not the distance, sets the arrival date.

04

Can you deliver to the mine?

Where the inland leg can be committed, yes, on DAP terms. Many sites are supplied through their own logistics base or by air or barge, so we often quote to that base rather than implying a door delivery we cannot stand behind.

05

What does NAQIA check?

The National Agriculture Quarantine and Inspection Authority checks timber packing and dunnage on arrival. Everything we ship goes on ISPM 15 treated, stamped timber, so the crate is not what holds the container.

06

Can you supply the LNG and upstream operators?

Yes, as a supplier to the operator or its contractors. API 6A wellhead, API 16C choke and kill and NACE MR0175 rated equipment, with material certificates where the contract requires them.

07

Is it worth consolidating orders?

More than almost anywhere. One consolidated container through Singapore and up to the site is far less freight, handling and waiting than several small consignments chasing each other along the same lane.

08

How long does air freight take?

Four to seven days into Port Moresby, routed through Singapore or Brisbane. Onward to Lae or a Highlands airstrip is quoted with the shipment.

From the blog

Guides for buyers in Papua New Guinea

Next step

Shipping to Papua New Guinea?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · PG

No account needed. We reply from the Dubai export desk.

Other export markets · 136 destinations

We run the same lane from Dubai to 135 other markets

All export markets