Size range
Load Binders
16 SKUs




Ro-Ro Chain Lashing with Hook Ends — 9–13 mm
Long link chain with drop-forged, quenched and tempered end fittings9 mm to 13 mm
Inquire











Questions we get asked
About this range
- 01Ratchet or lever binder?
- A ratchet binder tensions gradually and releases under control, so it suits operators who tension and release often. A lever binder is quicker but stores energy in the handle and must be released with care.
- 02Are load binders lifting equipment?
- No. A load binder tensions a chain tie-down to secure a load for transport. Its WLL is a tensioning rating and it is not for lifting.
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read
