Grade 100 Ratchet Load Binder
Grade 100 Ratchet Load Binder (EN 12195-3), in 9 sizes, 50 kN to 134 kN. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Grade 100 Ratchet Load Binder
- Pattern / standard: EN 12195-3
- Size range: 50 kN to 134 kN
- Size range
- 50 kN to 134 kN
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Grade 100 Ratchet Load Binder for tension, lashing and fixing duty. Built to the EN 12195-3 pattern. Alloy steel, powder coated.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
9 sizes, 50 kN to 134 kN. Lashing capacity 50 to 134 kN. Minimum breaking load 100 to 268 kN. Available as: safety hooks, clevis ends, without hooks. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Drop forged / machining.
- Rated with a 2:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 100 Ratchet Load Binder |
| Pattern / standard | EN 12195-3 |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 50 kN to 134 kN |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 100 to 268 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Type | Min breaking load (kN) | LC (kN) | A (mm) | D (mm) | E (mm) | H (mm) | L (mm) | P (mm) | L max (mm) | L min (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LB-100RLB-50KN-SH | 50 kN | Safety hooks | 100 | 50 | 50 | 12 | 10.5 | 98 | 383 | 56 | 500 | 340 | 3.71 |
| IH-LR-LB-100RLB-80KN-SH | 80 kN | Safety hooks | 160 | 80 | 50 | 14 | 13 | 121.5 | 390 | 65 | 525 | 365 | 5.85 |
| IH-LR-LB-100RLB-134KN-SH | 134 kN | Safety hooks | 268 | 134 | 72 | 20 | 15.5 | 159.5 | 392.5 | 69 | 525 | 365 | 9.34 |
| IH-LR-LB-100RLB-50KN-CE | 50 kN | Clevis ends | 100 | 50 | — | — | — | — | — | — | — | — | 2.6 |
| IH-LR-LB-100RLB-80KN-CE | 80 kN | Clevis ends | 160 | 80 | — | — | — | — | — | — | — | — | 4.3 |
| IH-LR-LB-100RLB-134KN-CE | 134 kN | Clevis ends | 268 | 134 | — | — | — | — | — | — | — | — | 5 |
| IH-LR-LB-100RLB-50KN-WH | 50 kN | Without hooks | 100 | 50 | — | — | — | — | — | — | — | — | 2.6 |
| IH-LR-LB-100RLB-80KN-WH | 80 kN | Without hooks | 160 | 80 | — | — | — | — | — | — | — | — | 4.3 |
| IH-LR-LB-100RLB-134KN-WH | 134 kN | Without hooks | 268 | 134 | — | — | — | — | — | — | — | — | 5 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. LC — Lashing capacity — the most a tie-down may hold in service when securing a load (EN 12195). A load-securing figure, not a lifting rating. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. P — Dimension P on the manufacturer dimension drawing. L max — Dimension L max on the manufacturer dimension drawing. L min — Dimension L min on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
LC is the lashing capacity — what a tie-down may hold when securing a load under EN 12195. It is not a lifting rating: never lift with load-securing equipment.
What sizes does the Grade 100 ratchet load binder come in?▾
Can it be used for lifting?▾
Ratchet or lever binder?▾
Are load binders lifting equipment?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Ratchet Load Binder — EN 12195-3
Alloy Lashing Hook Grade 80
Claw Load Binder
Chain Tension Lever
Grade 80 Lashing Type C Hook with Spring Pin
Grade 80 Winch Hook Half Link Safety Latch
