Grade 80 Lashing Type C Hook with Spring Pin
Grade 80 Lashing Type C Hook with Spring Pin, in 3 sizes, 2.5 t to 5.4 t. Not for overhead lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Lashing Type C Hook with Spring Pin
- Size range: 2.5 t to 5.4 t
- Working load limit: 2.5 to 5.4 t
- Size range
- 2.5 t to 5.4 t
- Working load limit
- 2.5 to 5.4 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Load binders tension chain tie-downs to secure a load for transport. Alloy steel, powder coated.
Sizes and ratings
3 sizes, 2.5 t to 5.4 t. Working load limit 2.5 to 5.4 t. Minimum breaking load 10 to 21.6 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Lashing Type C Hook with Spring Pin |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 2.5 t to 5.4 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 2.5 to 5.4 t |
| Minimum breaking load | 10 to 21.6 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Size | WLL (t) | Min breaking load (t) | A (mm) | B (mm) | L (mm) | R (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-LB-G80LCHSP-2P5T | 2.5 t | 2.5 | 10 | 13.5 | 90.5 | 143 | 18.5 | 0.5 |
| IH-LR-LB-G80LCHSP-3P75T | 3.75 t | 3.75 | 15 | 15.5 | 109.5 | 177 | 22 | 0.85 |
| IH-LR-LB-G80LCHSP-5P4T | 5.4 t | 5.4 | 21.6 | 17.7 | 129 | 205 | 25.5 | 1.38 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 lashing type c hook with spring pin come in?▾
What is the working load limit?▾
Ratchet or lever binder?▾
Are load binders lifting equipment?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Winch Hook Half Link Safety Latch
Lever Load Binder
Mini Load Binder
Ratchet Load Binder
Ratchet Load Binder — AS/NZS 4344
Recoil-Less Lever Load Binder, Grade 70
Steamboat Ratchet Binder with Pelican Hooks
