Claw Load Binder — 2,600–9,200 lbs WLL

Claw Load Binder, in 3 sizes, 1/4″-5/16″ to 3/8″-1/2″, WLL 2,600 to 9,200 lbs. For chain tie-downs, not lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Claw Load Binder
- Size range: 1/4″-5/16″ to 3/8″-1/2″
- Working load limit: 2,600 to 9,200 lbs
- Size range
- 1/4″-5/16″ to 3/8″-1/2″
- Working load limit
- 2,600 to 9,200 lbs
- Finish
- Painted red
Product description
Load binders tension chain tie-downs to secure a load for transport. Painted red.
Sizes and ratings
3 sizes, 1/4″-5/16″ to 3/8″-1/2″. Working load limit 2,600 to 9,200 lbs. Minimum breaking load 9,200 to 33,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Claw Load Binder |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″-5/16″ to 3/8″-1/2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 2,600 to 9,200 lbs |
| Minimum breaking load | 9,200 to 33,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Finish | Painted red |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-LB-CLAW-025-031
- Size
- 1/4″-5/16″
- WLL (lbs)
- 2,600
- Proof load (lbs)
- 5,200
- Min breaking load (lbs)
- 9,200
- Handle length (mm)
- 290.1
- A (mm)
- 524.8
- B (mm)
- 475
- C (mm)
- 389.9
- D (mm)
- 290.1
- E (mm)
- 224.8
- F (mm)
- 224.8
- G (mm)
- 8.9
- Weight (lbs)
- 3.6
- Indus part no.IH-LR-LB-CLAW-031-038
- Size
- 5/16″-3/8″
- WLL (lbs)
- 5,400
- Proof load (lbs)
- 10,800
- Min breaking load (lbs)
- 19,000
- Handle length (mm)
- 391.9
- A (mm)
- 640.1
- B (mm)
- 640.1
- C (mm)
- 545.1
- D (mm)
- 395
- E (mm)
- 309.9
- F (mm)
- 309.9
- G (mm)
- 11.9
- Weight (lbs)
- 8.56
- Indus part no.IH-LR-LB-CLAW-038-050
- Size
- 3/8″-1/2″
- WLL (lbs)
- 9,200
- Proof load (lbs)
- 18,400
- Min breaking load (lbs)
- 33,000
- Handle length (mm)
- 437.9
- A (mm)
- 715
- B (mm)
- 729
- C (mm)
- 625.1
- D (mm)
- 445
- E (mm)
- 344.9
- F (mm)
- 344.9
- G (mm)
- 15
- Weight (lbs)
- 12.38
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Handle length — Length of the operating handle. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is a claw load binder and what is it used for?▾
How do I read the Indus part number on the claw load binder, for example IH-LR-LB-CLAW-025-031?▾
What working load limits does the claw load binder have?▾
Which claw load binder size matches which chain?▾
Claw load binder compared with a standard lever load binder: what is different?▾
Claw load binder compared with a ratchet load binder: which should I buy?▾
What finish does the claw load binder have?▾
Does the claw load binder come with a certificate?▾
Can I use a claw load binder for overhead lifting?▾
How should I use and release a claw load binder safely?▾
Where are claw load binders used?▾
Do you keep the claw load binder in stock, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








