Chain Tension Lever — 9–13 mm

Chain Tension Lever, in 3 sizes, 9 mm to 13 mm. Not for overhead lifting. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Chain Tension Lever
- Size range: 9 mm to 13 mm
- Size range
- 9 mm to 13 mm
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Load binders tension chain tie-downs to secure a load for transport. Alloy steel, powder coated.
Sizes and ratings
3 sizes, 9 mm to 13 mm. Minimum breaking load 10,000 to 20,000 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / machining.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Chain Tension Lever |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 9 mm to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 10,000 to 20,000 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-LB-CTL-9MM
- Size
- 9 mm
- Chain size
- 9 mm
- Min breaking load (kg)
- 10,000
- D (mm)
- 11
- L (mm)
- 575
- L1 (mm)
- 275
- Weight (kg)
- 3.4
- Indus part no.IH-LR-LB-CTL-11MM
- Size
- 11 mm
- Chain size
- 11 mm
- Min breaking load (kg)
- 15,000
- D (mm)
- 12
- L (mm)
- 585
- L1 (mm)
- 345
- Weight (kg)
- 4.5
- Indus part no.IH-LR-LB-CTL-13MM
- Size
- 13 mm
- Chain size
- 13 mm
- Min breaking load (kg)
- 20,000
- D (mm)
- 14
- L (mm)
- 595
- L1 (mm)
- 385
- Weight (kg)
- 5.6
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is a chain tension lever and what is it used for?▾
How do I read the Indus part number on the chain tension lever, for example IH-LR-LB-CTL-9MM?▾
Which chain sizes does the chain tension lever fit, and how long is it?▾
What breaking load does the chain tension lever carry?▾
What is the chain tension lever made from?▾
Which lashing chain works with the chain tension lever?▾
Does the chain tension lever ship with a test certificate?▾
Chain tension lever compared with a lever load binder: what is the difference?▾
Is the chain tension lever safe to release under load?▾
Where is a chain tension lever used?▾
Can I lift with the chain tension lever?▾
Do you keep the chain tension lever in stock, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








