Winch Hook with Latch Carbon Steel 3.5T — 19 mm

Winch Hook with Latch Carbon Steel 3.5T, in 1 size, 19 mm. Not for overhead lifting. Load rating on request. Indus part numbers.
Key features
- Product type: Winch Hook with Latch Carbon Steel 3.5T
- Size range: 19 mm
- Size range
- 19 mm
- Material
- Carbon steel
- Finish
- Electro- galvanized
Product description
Load binders tension chain tie-downs to secure a load for transport. Carbon steel, electro- galvanized.
Sizes
1 size, 19 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged, heat treated.
Choosing a size
It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Winch Hook with Latch Carbon Steel 3.5T |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 19 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Electro- galvanized |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-LR-LB-WHLC35T-19MM
- Size
- 19 mm
- B (mm)
- 55
- E (mm)
- 17
- L (mm)
- 110
- Ø (mm)
- 19
- Weight (kg)
- 0.21
Size — Nominal size as the manufacturer states it. B — Dimension B on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the winch hook with latch in carbon steel?▾
How do I read the Indus part number on the winch hook with latch carbon steel, for example IH-LR-LB-WHLC35T-19MM?▾
What load rating does the carbon steel winch hook with latch have?▾
What are the dimensions of the 19 mm winch hook with latch?▾
What is the carbon steel winch hook made of, and how is it finished?▾
Does the winch hook with latch come with a certificate?▾
Carbon steel winch hook compared with the Grade 80 winch hook?▾
What does the winch hook with latch connect to?▾
Can the winch hook with latch be used for overhead lifting?▾
How should I inspect a winch hook with latch?▾
Where is a winch hook with latch used?▾
Do you keep the winch hook with latch, carbon steel in stock, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








