Recoil-Less Lever Load Binder, Grade 70
Recoil-Less Lever Load Binder, Grade 70 (US federal specification, FMCSA / DOT), in 1 size, 5/16″-3/8″, WLL 5,400 lbs. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Recoil-Less Lever Load Binder, Grade 70
- Pattern / standard: US federal specification, FMCSA / DOT
- Size range: 5/16″-3/8″
- Working load limit: 5,400 lbs
- Size range
- 5/16″-3/8″
- Working load limit
- 5,400 lbs
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Recoil-Less Lever Load Binder, Grade 70 for tension, lashing and fixing duty. Built to the US federal specification, FMCSA / DOT. Alloy steel, powder coated.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
1 size, 5/16″-3/8″. Working load limit 5,400 lbs. Minimum breaking load 19,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / machining + quenched and tempered.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Recoil-Less Lever Load Binder, Grade 70 |
| Pattern / standard | US federal specification, FMCSA / DOT |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5/16″-3/8″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 5,400 lbs |
| Minimum breaking load | 19,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | Chain size | WLL (lbs) | Proof load (lbs) | Min breaking load (lbs) | Handle length (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | G (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LB-RLLB70-516-38 | 5/16″-3/8″ | 5/16″-3/8″ | 5,400 | 10,800 | 19,000 | 330.2 | 599.9 | 566.9 | 332.7 | 286 | 286 | 11.94 | 9.25 |
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Handle length — Length of the operating handle. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the recoil-less lever load binder, Grade 70 come in?▾
Can it be used for lifting?▾
Ratchet or lever binder?▾
Are load binders lifting equipment?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Steamboat Ratchet Binder with Pelican Hooks
Winch Hook with Latch Carbon Steel 3.5T
Grade 100 Ratchet Load Binder
Grade 80 Ratchet Load Binder — EN 12195-3
Alloy Lashing Hook Grade 80
Claw Load Binder
Chain Tension Lever
