Ro-Ro Chain Lashing with Hook Ends — 9–13 mm

Ro-Ro Chain Lashing with Hook Ends, in 3 sizes, 9 mm to 13 mm, breaking load 100 to 200 kN. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Chain lashing assembly
- Pattern / standard: Long link chain lashing
- Size range: 9 mm to 13 mm
- Size range
- 9 mm to 13 mm
- Material
- Long link chain with drop-forged, quenched and tempered end fittings
- Finish
- Powder coated or galvanized
Product description
Made-up chain lashing: a length of long link lashing chain with drop-forged hook end fittings, for Ro-Ro vehicle lashing and general cargo securing. It works with a tension lever of the same chain size.
Sizes and ratings
3 sizes, 9 mm to 13 mm. Minimum breaking load 100 to 200 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in. The lettered dimensions refer to the dimension drawing in the gallery.
Choosing a size
Pick the lashing by chain size and breaking load, and pair it with a tension lever made for that chain. The table gives the minimum breaking load; a lashing is a load-securing device and is not for lifting.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Chain lashing assembly |
| Pattern / standard | Long link chain lashing |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 9 mm to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 100 to 200 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Long link chain with drop-forged, quenched and tempered end fittings |
| Finish | Powder coated or galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-LB-RRCL-9MM
- Size
- 9 mm
- Min breaking load (kN)
- 100
- D (mm)
- 11
- L (mm)
- 575
- L1 (mm)
- 275
- Weight (kg)
- 3.4
- Indus part no.IH-LR-LB-RRCL-11MM
- Size
- 11 mm
- Min breaking load (kN)
- 150
- D (mm)
- 12
- L (mm)
- 585
- L1 (mm)
- 345
- Weight (kg)
- 4.5
- Indus part no.IH-LR-LB-RRCL-13MM
- Size
- 13 mm
- Min breaking load (kN)
- 200
- D (mm)
- 14
- L (mm)
- 595
- L1 (mm)
- 385
- Weight (kg)
- 5.6
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is a Ro-Ro chain lashing with hook ends?▾
How do I read the Indus part number on the Ro-Ro chain lashing with hook ends, for example IH-LR-LB-RRCL-9MM?▾
What are the breaking loads of the Ro-Ro chain lashing with hook ends?▾
What are the dimensions and weights of the Ro-Ro lashing with hooks?▾
What is the Ro-Ro chain lashing made of?▾
What tension lever works with the Ro-Ro chain lashing with hook ends?▾
Ro-Ro chain lashing with hook ends compared with plain Ro-Ro lashing chain?▾
Does the Ro-Ro chain lashing come with a certificate?▾
Can the Ro-Ro chain lashing be used for lifting?▾
Where is a Ro-Ro chain lashing used?▾
How should lashing chain be inspected?▾
Do you keep the Ro-Ro chain lashing with hook ends in stock, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








