Ratchet Load Binder — AS/NZS 4344, 6–13 mm

Ratchet Load Binder (AS/NZS 4344), in 4 sizes, 6 mm to 13 mm, LC 2,300 to 10,500 kg. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Ratchet Load Binder
- Pattern / standard: AS/NZS 4344
- Size range: 6 mm to 13 mm
- Size range
- 6 mm to 13 mm
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Ratchet Load Binder for tension, lashing and fixing duty. Built to the AS/NZS 4344 pattern. Alloy steel, powder coated.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
4 sizes, 6 mm to 13 mm. Lashing capacity 2,300 to 10,500 kg. Minimum breaking load 46 to 176 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / machining + quenched and tempered.
Choosing a size
Match the binder to the chain size and select on WLL. It is a tensioning device, not lifting equipment.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Ratchet Load Binder |
| Pattern / standard | AS/NZS 4344 |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 46 to 176 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-LB-RLBASN434-6MM
- Size
- 6 mm
- Chain size
- 6 mm
- Min breaking load (kN)
- 46
- LC (kg)
- 2,300
- A (mm)
- 210
- C (mm)
- 42
- G (mm)
- 10
- Weight (kg)
- 1.69
- Indus part no.IH-LR-LB-RLBASN434-8MM
- Size
- 8 mm
- Chain size
- 8 mm
- Min breaking load (kN)
- 74
- LC (kg)
- 4,100
- A (mm)
- 355
- C (mm)
- 65
- G (mm)
- 11
- Weight (kg)
- 4.9
- Indus part no.IH-LR-LB-RLBASN434-10MM
- Size
- 10 mm
- Chain size
- 10 mm
- Min breaking load (kN)
- 118
- LC (kg)
- 6,400
- A (mm)
- 355
- C (mm)
- 65
- G (mm)
- 12
- Weight (kg)
- 5.4
- Indus part no.IH-LR-LB-RLBASN434-13MM
- Size
- 13 mm
- Chain size
- 13 mm
- Min breaking load (kN)
- 176
- LC (kg)
- 10,500
- A (mm)
- 355
- C (mm)
- 65
- G (mm)
- 15
- Weight (kg)
- 7.5
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. Min breaking load — Minimum breaking load. A test figure — never lift to it. LC — Lashing capacity — the most a tie-down may hold in service when securing a load (EN 12195). A load-securing figure, not a lifting rating. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
LC is the lashing capacity — what a tie-down may hold when securing a load under EN 12195. It is not a lifting rating: never lift with load-securing equipment.
What is the AS/NZS 4344 ratchet load binder?▾
How do I read the Indus part number on the AS/NZS 4344 ratchet load binder, for example IH-LR-LB-RLBASN434-6MM?▾
What lashing capacity does the AS/NZS 4344 ratchet load binder have?▾
What are the dimensions and weights of the AS/NZS 4344 ratchet binder?▾
Which standard does the AS/NZS 4344 ratchet load binder follow?▾
Which chain does the AS/NZS 4344 ratchet binder fit?▾
What is the AS/NZS 4344 ratchet load binder made of?▾
AS/NZS 4344 ratchet binder compared with the EN 12195-3 ratchet binder?▾
Can the AS/NZS 4344 ratchet load binder be used for lifting?▾
What should I check before using an AS/NZS 4344 ratchet binder?▾
Where is an AS/NZS 4344 ratchet binder used?▾
Do you keep the AS/NZS 4344 ratchet load binder in stock, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read








