Skip to content
Buying fittings & adapters

SAE flange adapters: Code 61 and Code 62 flange heads, pad adapters and how to choose them

Above 1" and on pump ports, threads give way to four bolts and an O-ring. An SAE flange adapter turns that four-bolt port into a JIC, ORFS, NPTF, ORB or weld connection — in Code 61 to 5,000 psi in small sizes, or Code 62 to 6,000 psi through 2". Flange heads versus flange pad adapters, Code 61 against Code 62, pressure by size, and what an order has to state.

Written by
Ayush Bhatia, Director
Published
Reading
5 min · 3 sections
Share
A four-bolt SAE split flange clamping a flanged adapter head to a hydraulic pump outlet port, with a steel tube
Four bolts and an O-ring: how large, high-pressure pump ports are connected.

At a glance

Key takeaways

  1. SAE J518 / ISO 6162 four-bolt flanges are the connection for large, high-pressure ports: Parker calls them proven, leak-free and especially suited to larger sizes and higher pressures.
  2. Code 61 is the standard-pressure series: 5,000 psi from ½" to 1", 4,000 psi at 1¼", 3,000 psi at 1½" and 2". Code 62 is 6,000 psi through 2".
  3. Code 61 and Code 62 heads of the same nominal size are different dimensions — the bolt pattern and head thickness differ — and do not interchange.
  4. A flange head adapter is clamped by split flange halves or a one-piece flange; a flange pad adapter bolts directly to the port and offers a thread on its face.
  5. Specify code, nominal size, the other end and the bolts — and whether the port is inch or metric bolted.

Figures verified · Flange system and port limits from Parker Catalog 4300 (2017 edition); pressures by size from a table citing SAE J518.

Threaded ports have a size limit. Parker notes that straight-thread O-ring ports keep 6,000 psi and higher capability only up to size 12 (M27); above it the rating falls and the torque needed climbs fast. Pumps, motors and large valves therefore use the four-bolt SAE flange, and the adapter that meets it is how a hose, tube or pipe connects. For telling Code 61 from Code 62 on a machine, see SAE J518 Code 61 and Code 62 flanges; this guide is about the adapters.

/01Code 61 and Code 62.

SAE J518 four-bolt flange working pressure by size
Nominal sizeDashCode 61Code 62
½"-85,000 psi (345 bar)6,000 psi (414 bar)
¾"-125,000 psi (345 bar)6,000 psi (414 bar)
1"Highlighted-165,000 psi (345 bar)6,000 psi (414 bar)
1¼"-204,000 psi (276 bar)6,000 psi (414 bar)
1½"-243,000 psi (207 bar)6,000 psi (414 bar)
2"Highlighted-323,000 psi (207 bar)6,000 psi (414 bar)
2½"-402,500 psi (172 bar)—
3"-482,000 psi (138 bar)—

The nominal size is the flange bore, not a thread. Code 62 holds 6,000 psi to 2" because its head is thicker and its bolts larger; Code 61 trades pressure for a lighter flange and is offered in bigger sizes. Some adapter families also label them "L-series" (3,000 psi class) and "S-series" (6,000 psi class), especially on metric-tube flange connectors — read L as Code 61 and S as Code 62 when matching.

/02Flange heads and flange pad adapters.

The two ways an adapter meets a four-bolt port
TypeHow it attachesTypical other end
Flange head adapter (straight, 45°, 90°)HighlightedA flanged head with an O-ring groove, clamped to the port by split flange halves or a one-piece flange and four boltsJIC 37° male, ORFS male, metric 24° bite type, weld tube
One-piece tube elbowHead and bend in one forging — no extra joint at the portJIC 37° male
Flange pad adapterA block that bolts straight to the port, with its own O-ringNPTF, ORB, JIC or ORFS on its face
Weld flange connectorFlange head with a weld end for tube or pipeButt weld to the line

A flange head needs the clamp hardware: two split flange halves or a one-piece flange, four bolts and an O-ring of the right size and compound. A pad adapter carries its own bolt holes and is the quick way to put a threaded port where a flange was — useful for a gauge or test point, or to adapt a pump to an existing threaded line, at the threaded end’s lower rating. Elbow heads let the line leave the port in the direction it needs without a second fitting.

/03How to order.

Describing an SAE flange adapter
ItemExample
CodeHighlightedCode 62
Nominal size1" (-16)
TypeFlange head, 90° elbow; or flange pad adapter
Other endJIC 37° male -16; or ORFS male -16; or NPTF female 1"
Clamp hardwareSplit flange halves or one-piece flange, bolts (inch or metric), O-ring compound

Common questions

What is the difference between Code 61 and Code 62?
Pressure and size. Code 61 is rated 5,000 psi to 1", falling to 3,000 psi at 1½–2"; Code 62 is 6,000 psi through 2" with a thicker head and larger bolts. Same nominal sizes, different dimensions — they do not interchange.
What is an SAE flange adapter?
A fitting that connects a four-bolt SAE J518 port to another connection — JIC, ORFS, NPTF, ORB or a weld end — either through a flanged head clamped by split flanges or as a pad adapter bolted to the port.
Are L-series and S-series the same as Code 61 and 62?
In flange adapter ranges, L-series is the 3,000 psi class (Code 61) and S-series the 6,000 psi class (Code 62). Check the bolt pattern to be sure.
Why use a flange instead of a threaded port?
Threaded O-ring ports lose pressure capability above size 12 (M27) and need very high torque; a four-bolt flange spreads the load over four bolts and seals on an O-ring.
What does a flange pad adapter do?
It bolts directly to a four-bolt port and provides a threaded port — NPTF, ORB, JIC or ORFS — on its face.

What we list

Steel Code 61 and Code 62 flange heads, one-piece elbows, pad adapters and weld flange connectors:

SAE flange adapters

Sources

  1. 1.Parker Hannifin Tube Fittings Division. Catalog 4300, Section L (2017 edition; current edition 9/2023). ↗
  2. 2.Hydroscand. SAE flange dimensions (citing SAE J518c). ↗

What next

  1. 01
  2. 02
  3. 03

    Where these orders go

    Fittings and adapters are the smallest thing we ship and the one that decides whether a machine works, so they travel the way the destination allows: consolidated into a planned consignment where a site is on a long lane, and on their own airway bill when something is standing still. Orders of this kind are quoted from a photograph and a measurement rather than a part number, which is what makes them practical to place from somewhere with no counter nearby.

    Everything above ships from the same Dubai warehouse. If your destination is not listed, it is almost certainly still one we quote. See every export destination

Matching a flange port?

Send the code, nominal size and the connection you need on the other side — or a photo of the port with its bolt spacing. We will quote the adapter and the clamp hardware.

Plant-down? Call +971 52 2477942 — 24/7

Keep reading

More on Buying fittings & adapters

All articles in this topic
Plastic push-to-connect pneumatic fittings with blue and black polyurethane air tubes on a machine manifold

Push-to-connect air fittings: how they grip and seal, ratings, tube, and the mistakes that make them leak

4 min read

Brass 45° flare fittings, flared copper tube, compression fittings with sleeves, and an inverted flare union on steel tube

Brass flare and compression fittings: SAE 45° flare, inverted flare and compression — ratings and threads

5 min read

Brass threaded pipe fittings: hex nipple, street elbow, tee, coupling, union, hex bushing, square-head plug and cap

Brass pipe fittings and adapters: NPTF and BSP threads, 1,000 psi ratings, lead-free and DZR brass

5 min read

Back to Blog