JIC Male 74° Cone × SAE Flange
JIC Male 74° Cone × SAE Flange — SAE flange adapter, straight body, 13 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: straight
- Port A Thread: UN/UNF 3/4-16 to 1.7/8-12
- Port A Sealing: JIC 37° cone (74° included)
- Nominal Size Range: -08 to -24
- Max Working Pressure: up to 310 bar (4,496 psi), manufacturer stated
- Body Configuration
- straight
- Port A Thread
- UN/UNF 3/4-16 to 1.7/8-12
- Port A Sealing
- JIC 37° cone (74° included)
- Nominal Size Range
- -08 to -24
- Max Working Pressure
- up to 310 bar (4,496 psi), manufacturer stated
Product description
The JIC Male 74° Cone × SAE Flange is a straight hydraulic adapter in the Indus SAE flange range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions, the weight and the working pressure.
Construction
- Body configuration: straight
- Port A: JIC Male 74° Cone
- Port B: S-Series Flange ISO 6162-2-1
- Material: carbon steel (stainless steel available on request)
- Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant
Threads
- Port A: UN/UNF 3/4-16 to 1.7/8-12
- Port B: 1/2" to 1.1/2"
Sealing
JIC 37° cone (74° included) and SAE flange face with O-ring. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.
Performance
The manufacturer states 140 to 310 bar depending on size, printed against every size in the table. That is the rating of the adapter; an assembly is limited by whichever component is rated lowest — the hose, the tube or the port.
Applicable standards
SAE J514, ISO 8434-2, ISO 6162.
How to order
Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.
Companion products
These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | UN/UNF 3/4-16 to 1.7/8-12 |
| Port A Sealing | JIC 37° cone (74° included) |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | 1/2" to 1.1/2" |
| Port B Sealing | SAE flange face with O-ring |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -08 to -24 |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 310 bar (4,496 psi), manufacturer stated |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2, ISO 6162 |
Shipping & lead time
Sizes & part numbers
13 sizes| Indus part no. | End 1 | End 2 | D (mm) | L (mm) | L1 (mm) | Weight (g) | Working pressure (bar) |
|---|---|---|---|---|---|---|---|
| IH-AD-SAEFL-010-08 | 3/4"X16 | 1/2" | 31.7 | 47.5 | 7.75 | 70 | 310 |
| IH-AD-SAEFL-010-1008 | 7/8"X14 | 1/2" | 31.7 | 50 | 7.75 | 90 | 240 |
| IH-AD-SAEFL-010-1012 | 7/8"X14 | 3/4" | 41.3 | 55 | 8.76 | 99 | 240 |
| IH-AD-SAEFL-010-12 | 1.1/16"X12 | 3/4" | 41.3 | 56.7 | 8.76 | 146 | 240 |
| IH-AD-SAEFL-010-1216 | 1.1/16"X12 | 1" | 47.6 | 61.5 | 9.53 | 158 | 240 |
| IH-AD-SAEFL-010-1612 | 1.5/16"X12 | 3/4" | 41.3 | 57.8 | 8.76 | 205 | 210 |
| IH-AD-SAEFL-010-16 | 1.5/16"X12 | 1" | 47.6 | 62.8 | 9.53 | 224 | 200 |
| IH-AD-SAEFL-010-1620 | 1.5/16"X12 | 1.1/4" | 54 | 67.7 | 10.29 | 241 | 170 |
| IH-AD-SAEFL-010-2016 | 1.5/8"X12 | 1" | 47.6 | 64 | 9.53 | 234 | 170 |
| IH-AD-SAEFL-010-20 | 1.5/8"X12 | 1.1/4" | 54 | 68.9 | 10.29 | 349 | 170 |
| IH-AD-SAEFL-010-2024 | 1.5/8"X12 | 1.1/2" | 63.5 | 73.5 | 12.57 | 356 | 140 |
| IH-AD-SAEFL-010-2420 | 1.7/8"X12 | 1.1/4" | 54 | 72 | 10.29 | 432 | 140 |
| IH-AD-SAEFL-010-24 | 1.7/8"X12 | 1.1/2" | 63.5 | 76.7 | 12.57 | 438 | 140 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What sizes does the JIC Male 74° Cone × SAE Flange come in?▾
Is it available in stainless steel?▾
Can I get it faster than the quoted lead time?▾
What pressure is it rated for?▾
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE-Flansch Flansch Außengewinde JIC
- fr
- bride SAE bride mâle JIC
- es
- brida SAE brida macho JIC
- it
- flangia SAE flangia maschio JIC
From the blog
Written about this range
Failure analysis
A damaged port: repair it, or is the component scrap?
The fitting is cheap and the thing it screws into is not. How to judge what is in front of you, and the cases where the honest answer is that it is finished.
3 min read
Thread & fitting identification
Hydraulic fittings and adapters: the complete guide to thread families, seats and seals
BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.
6 min read
Engineers viewing this also looked at
90° JIC Male 74° Cone × SAE Flange
Steel JIC 37° Male × Code 62 Flange Adapter
Steel JIC 37° Male × Code 62 Flange 45° Elbow
Steel JIC 37° Male × Code 62 Flange 90° Elbow
Steel ORFS Male × Code 61 Flange Adapter
Steel ORFS Male × Code 61 Flange 45° Elbow
Steel ORFS Male × Code 61 Flange 90° Elbow
