What sizes does the Metric Male Bite Type × SAE Flange (L-Series, 3000 psi) come in?

20 sizes are listed, covering -22 to -52. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one.

Is it available in stainless steel?

Yes. Every size is available in 316 stainless steel on request — add "-SS" to the part number when you enquire. Lead time is longer than for the zinc-plated carbon-steel stock.

Can I get it faster than the quoted lead time?

Tell us it is a plant-down job when you enquire. Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST.

What thread family does this adapter use?

SAE flange. ISO 6162. The seat is SAE flange face with O-ring. Check the thread on each end against the size table before ordering.

What are the port specs?

Port A: Metric Male Bite Type. Port B: Flange. Port A: Metric M22×1.5 to M42×2. Port B: Metric M8×25 to M12×35.

What sizes are available?

20 sizes are listed, covering -22 to -52. The Sizes & Part Numbers tab gives the thread on each end, the dimensions and the Indus part number for every one. Sizes outside the table are quoted on request.

What is the maximum working pressure?

The manufacturer publishes no pressure rating for this family, so this page does not state one. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

What materials and finishes are available?

Standard: carbon steel with a zinc-plated, Cr3+ passivated, RoHS-compliant finish. 316 stainless steel is available on request for marine, chemical or food-grade service — add "-SS" to the part number when you enquire.

Is this adapter interchangeable with other thread families?

No. SAE flange is a thread family in its own right and does not interchange with BSP, JIC, NPT, metric or ORFS. Where you need to cross between families, use the adapter built for that pair rather than forcing a thread that nearly fits.

Do I need to crimp this onto a hose?

No. These are tube and port adapters, not hose ends — they thread into a port or join two threaded ends. For a hose assembly use Indus crimp ferrules with the matching Indus hose-end fitting.

Common sizes are held in Jebel Ali and go out the same day if you order before 14:00 GST. Less-common combinations ship within 7 working days of RFQ confirmation; say if it is a plant-down job and we will prioritise it.

INDUS HYDRAULICSIH-AD-SAEFL-006

Metric Male Bite Type × SAE Flange (L-Series, 3000 psi)

Name: Metric Male Bite Type × SAE Flange (L-Series, 3000 psi)
Brand: Indus Hydraulics
SKU: IH-AD-SAEFL-006

SAE Flange AdaptersEx-stock · delivery in 3 days

VIEW 01·Straight flange adapter, metric bite-type male end × SAE Code 61 (L-series, 3000 psi) flange head

Metric Male Bite Type × SAE Flange (L-Series, 3000 psi) — SAE flange adapter, straight body, 20 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.

Key features

Body Configuration: straight
Port A Thread: Metric M22×1.5 to M42×2
Nominal Size Range: -22 to -52

Body Configuration: straight
Port A Thread: Metric M22×1.5 to M42×2
Nominal Size Range: -22 to -52

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The Metric Male Bite Type × SAE Flange (L-Series, 3000 psi) is a straight hydraulic adapter in the Indus SAE flange range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.

Construction

Body configuration: straight
Port A: Metric Male Bite Type
Port B: Flange
Material: carbon steel (stainless steel available on request)
Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant

Threads

Port A: Metric M22×1.5 to M42×2
Port B: Metric M8×25 to M12×35

Sealing

SAE flange face with O-ring. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.

Performance

The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.

Applicable standards

ISO 6162.

Light and heavy series

Both the light and the heavy series are listed on this page. They share a nominal size but not a tube outside diameter, so pick the row by the tube O.D. column, not by the thread alone.

How to order

Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.

Companion products

These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.

Identification

Parameter	Value
Body Configuration	straight

Port A

Parameter	Value
Port A Thread	Metric M22×1.5 to M42×2
Port A Gender	male

Port B

Parameter	Value
Port B Thread	Metric M8×25 to M12×35
Port B Sealing	SAE flange face with O-ring

Dimensions

Parameter	Value
Nominal Size Range	-22 to -52

Construction

Parameter	Value
Material	Carbon steel (stainless on request)
Surface Treatment	Zinc-plated, Cr3+ passivated, RoHS-compliant

Compliance

Parameter	Value
Applicable Standards	ISO 6162

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

20 sizes

Indus part no.	End 1	End 2	S1 (mm)	S2 (mm)	D (mm)	D1 (mm)	L1 (mm)	L2 (mm)	L3 (mm)	L4 (mm)
IH-AD-SAEFL-006-C2208	M22X1.5	M8X25	24	27	30.2	15	48	41	6.7	56
IH-AD-SAEFL-006-C2608	M26X1.5	M8X25	24	32	30.2	18	50	42.5	6.7	61
IH-AD-SAEFL-006-C2612	M26X1.5	M10X30	30	32	38.1	18	53	45.5	6.7	62
IH-AD-SAEFL-006-C3012	M30X2	M10X30	30	36	38.1	22	53	45.5	6.7	62
IH-AD-SAEFL-006-C3612	M36X2	M10X30	32	41	38.1	28	55	45.5	6.7	64
IH-AD-SAEFL-006-C3616	M36X2	M10X30	36	41	44.5	28	54	46.5	8	63
IH-AD-SAEFL-006-C4520	M45X2	M10X35	41	50	50.8	35	58	47.5	8	69
IH-AD-SAEFL-006-C4524	M45X2	M12X35	46	50	60.3	35	65	54.5	8	76
IH-AD-SAEFL-006-C5224	M52X2	M12X35	46	60	60.3	42	64	53	8	76
IH-AD-SAEFL-006-D2408	M24X1.5	M8X25	24	30	30.2	16	50	41.5	6.7	60
IH-AD-SAEFL-006-D2412	M24X1.5	M10X30	27	30	38.1	16	55	46.5	6.7	64.5
IH-AD-SAEFL-006-D3012	M30X2	M10X30	30	36	38.1	20	57	46.5	6.7	68
IH-AD-SAEFL-006-D3612	M36X2	M10X30	30	46	38.1	25	57	45	6.7	69
IH-AD-SAEFL-006-D3016	M30X2	M10X30	32	36	44.5	20	60	48.5	8	71
IH-AD-SAEFL-006-D3616	M36X2	M10X30	36	46	44.5	25	58	46.5	8	60
IH-AD-SAEFL-006-D4216	M42X2	M10X30	36	50	44.5	30	63	49.5	8	76
IH-AD-SAEFL-006-D3620	M36X2	M10X35	41	46	50.8	25	60	48	8	72
IH-AD-SAEFL-006-D4220	M42X2	M10X35	41	50	50.8	30	62	48.5	8	75
IH-AD-SAEFL-006-D5220	M52X2	M10X35	46	60	50.8	38	66	50	8	81
IH-AD-SAEFL-006-D5224	M52X2	M10X35	46	60	60.3	38	70	54	8	85

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. L4 — Dimension L4 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: SAE-Flansch Flansch Außengewinde metrisch
fr: bride SAE bride mâle métrique
es: brida SAE brida macho métrica
it: flangia SAE flangia maschio metrica

From the blog

Written about this range

Failure analysis

A damaged port: repair it, or is the component scrap?

The fitting is cheap and the thing it screws into is not. How to judge what is in front of you, and the cases where the honest answer is that it is finished.

3 min read

Thread & fitting identification

Hydraulic fittings and adapters: the complete guide to thread families, seats and seals

BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.

6 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

Straight flange adapter, metric bite-type male end × SAE Code 62 (S-series, 6000 psi) flange head

IH-AD-SAEFL-007

Metric Male Bite Type × SAE Flange (L-Series, 3000 psi)

Key features

Product description

Construction

Threads

Sealing

Performance

Applicable standards

Light and heavy series

How to order

Companion products

Identification

Port A

Port B

Dimensions

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Written about this range

A damaged port: repair it, or is the component scrap?

Hydraulic fittings and adapters: the complete guide to thread families, seats and seals

Engineers viewing this also looked at

Metric Male Bite Type × SAE Flange (S-Series, 6000 psi)

90° Metric Male Bite Type × SAE Flange (L-Series, 3000 psi)

90° Metric Male Bite Type × SAE Flange (S-Series, 6000 psi)

JIC Male 74° Cone × SAE Flange

90° JIC Male 74° Cone × SAE Flange

Steel JIC 37° Male × Code 62 Flange Adapter

Steel JIC 37° Male × Code 62 Flange 45° Elbow

Steel JIC 37° Male × Code 62 Flange 90° Elbow