Skip to content

ORFS Adapters

72 SKUs6 brands

Showing 1–48 of 72 SKUs

Swivel connector, SAE O-ring boss male × ORFS female swivel nut

Male SAE ORB × Female ORFS Swivel Adapter

Indus Hydraulicsup to 415 bar (6000 psi)straight
Inquire
Straight male connector, ORFS male × SAE O-ring boss male with O-ring

Male ORFS × Male SAE ORB Adapter

Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
Inquire
Straight male connector, ORFS male face seal both ends, zinc-plated steel

Male ORFS × Male ORFS Adapter

Indus Hydraulicsup to 415 bar (6000 psi)straight
Inquire
Straight male connector, ORFS male × NPT male, zinc-plated steel hex body

Male ORFS × Male NPT Adapter

Indus Hydraulicsorfsup to 415 bar (6000 psi)
Inquire
Straight male connector, ORFS male × metric flat-face male with O-ring

Male ORFS × Male Metric Flat-Face Adapter

Indus Hydraulicsup to 415 bar (6000 psi)ORFS UN/UNF (9/16-18 to 1-7/16-12)
Inquire
Straight male connector, ORFS male face seal × BSP male, zinc-plated steel

Male ORFS × Male BSPP Adapter

Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)orfs
Inquire
Adjustable run tee, ORFS male × ORFS male × SAE O-ring boss stud with locknut

Adjustable Run Tee, Male ORFS × ORFS × SAE ORB

Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
Inquire
Adjustable branch tee, ORFS male × SAE O-ring boss stud × ORFS male

Adjustable Branch Tee, Male ORFS × SAE ORB × ORFS

Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
Inquire
Adjustable branch tee, ORFS male × metric O-ring stud × ORFS male

Adjustable Branch Tee, Male ORFS × Metric 24° × ORFS

Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
Inquire
Adjustable branch tee, ORFS male × BSP O-ring stud × ORFS male

Adjustable Branch Tee, Male ORFS × BSPP × ORFS

Indus HydraulicsORFS UN/UNF (9/16-18 to 1-7/16-12)branch-tee
Inquire
Adjustable 90° elbow, ORFS male × SAE O-ring boss stud with locknut

Male ORFS × Male SAE ORB Adjustable 90° Elbow Adapter

Indus Hydraulicsup to 415 bar (6000 psi)ORFS UN/UNF (9/16-18 to 1-7/16-12)
Inquire
Adjustable 90° elbow, ORFS male × metric flat-face stud with locknut

Male ORFS × Male Metric Flat-Face Adjustable 90° Elbow Adapter

Indus Hydraulicsup to 415 bar (6000 psi)90-elbow
Inquire
Adjustable 45° elbow, ORFS male × BSP O-ring stud with locknut

Male ORFS × Male BSPP Adjustable 45° Elbow Adapter

Indus Hydraulicsup to 415 bar (6000 psi)45-elbow
Inquire
45° swivel connector, ORFS male × ORFS female swivel nut, forged steel

Male ORFS × Female ORFS Swivel 45° Elbow Adapter

Indus Hydraulicsstraightup to 415 bar (6000 psi)
Inquire
ORFS bulkhead locknut, thin zinc-plated steel hex

Lock Nut ORFS

Indus Hydraulicslock-nut-04 to -16
Inquire
ORFS bulkhead union, straight face-seal ends with long threaded body and locknut

Bulkhead Union ORFS

Indus HydraulicsbulkheadORFS UN/UNF (9/16-18 to 1-7/16-12)
Inquire
Category image · Hoses & Fittings
Category image · Hoses & Fittings
90° elbow adapter, ORFS male face seal with O-ring × NPT male, forged steel

90° ORFS Male O-Ring × NPT Male

Indus HydraulicsUN/UNF 9/16-18 to 2-1290 elbow
Inquire
90° ORFS male O-ring bulkhead elbow, long threaded leg with locknut

90° Elbow ORFS Male O-Ring Bulkhead

Indus Hydraulicsup to 630 bar (9,137 psi), manufacturer stated-04 to -24
Inquire

Questions we get asked

About this range

01Does an ORFS joint need sealant or tape?
No — it seals on the face O-ring. Sealant on the thread or the face can stop the O-ring seating, and it contaminates the system.
02Which O-ring does an ORFS fitting use?
A face O-ring sized for the fitting’s dash size, usually nitrile for mineral oil. Use the size specified for the fitting: one too thick or too thin will not seal.
03Why choose ORFS over JIC?
ORFS tolerates vibration better because the seal is an elastomer rather than a metal seat. JIC is simpler and has no O-ring to replace. Most machines use one or the other; match what is fitted.
04Why won’t an ORFS -08 screw onto a JIC -08?
Because ORFS uses a larger thread than JIC at the same dash size. ORFS threads are -04 9/16-18, -06 11/16-16, -08 13/16-16, -10 1-14, -12 1-3/16-12 and -16 1-7/16-12, whereas a JIC -08 is 3/4-16. The dash number gives the tube size, not the thread, so measure the thread and look for the face O-ring before ordering a replacement.
05Why does an ORFS joint leak when the line is pulled into place?
Because the two flat faces must meet square, and a side load lifts one edge of the O-ring off its face. Unlike a cone, a flat face does not centre itself, so the line has to be routed and supported to reach the port without being forced. Seat the O-ring fully in its groove, start the nut by hand, bring the faces together squarely, then tighten to the specified torque.
06What does “captive seal” mean on an ORFS × metric adapter?
It means the stud end’s seal sits in a retaining groove so it cannot fall out or be lost during assembly. The seal faces the port spot-face, so the thread itself carries no sealing duty and no sealant is needed. Replace the seal when the adapter is removed; a nicked or flattened seal is the usual cause of a weep at that end.