Category image · Hoses & FittingsBrennan FS2408 MFS Plugs in steel face seal: 3 part numbers.
Product description
Brennan FS2408 MFS Plugs in steel face seal: 3 part numbers.
Specification
- Type: MFS Plug
- Material: Steel Face Seal
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Brennan part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Brennan part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
3 sizes- Brennan part no.FS2408-24
- Description
- Plug, Face Seal, Steel Face Seal
- Brennan part no.FS2408-20
- Description
- Plug, Face Seal, Steel Face Seal
- Brennan part no.fs2408-06
- Description
- Steel Hydraulic Fittings, 3/8 Inch Face Seal
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What is the Brennan FS2408 MFS Plugs used for?▾
How do I read part numbers such as FS2408-24 on the Brennan FS2408 MFS Plugs?▾
What sizes and part numbers does the Brennan FS2408 MFS Plugs come in?▾
What pressure rating does the Brennan FS2408 MFS Plugs have?▾
What is the Brennan FS2408 MFS Plugs made of?▾
Which standards and documents apply to the Brennan FS2408 MFS Plugs?▾
What does the Brennan FS2408 MFS Plugs connect to?▾
How do I install the Brennan FS2408 MFS Plugs so it does not leak?▾
Where is the Brennan FS2408 MFS Plugs used?▾
How does the Brennan FS2408 MFS Plugs differ from the Tompkins FF2408 Male ORFS Hex Head Plug?▾
How is the Brennan FS2408 MFS Plugs exported from Dubai?▾
Do you stock the Brennan FS2408 MFS Plugs in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Buying fittings & adapters
ORFS and ORB adapters: O-ring face seal and O-ring boss — ratings, torque, sleeves and O-rings
Most hydraulic leaks that come back after re-tightening are metal seats that never sealed. ORFS and ORB move the seal to an O-ring — and that makes the O-ring the part to stock. The steel ORFS and ORB range: unions, elbows, tees, bulkheads, swivels, adjustable elbows, braze and mechanical sleeves, plugs and O-ring kits, with Parker’s ratings (9,200 psi in the small sizes) and torque by dash size.
8 min read
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read





