Parker Seal-Lok PNMLO Plug and Caps

Parker Seal-Lok PNMLO Plug and Caps in steel: 7 part numbers.
Product description
Parker Seal-Lok PNMLO Plug and Caps in steel: 7 part numbers.
Specification
- Type: Plug
- Material: Steel
- Seal Material: Nitrile
- Part numbers: 7
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Configuration Sub Type | Plug Mm Hex Orfs |
| Material Grade | Grade 1008 |
| Seal Material | Nitrile |
| Series | ORFS Series |
| System Of Measurement | Imperial |
| Tube Fitting/adapter Type | ORFS, Seal Lok O Ring Face Seal |
Shipping & lead time
Sizes & part numbers
7 sizes- Parker Hannifin part no.4PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 1/4 Inch Fitting Size
- Working pressure (bar)
- 634
- Parker Hannifin part no.6PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 3/8 Inch Fitting Size
- Working pressure (bar)
- 634
- Parker Hannifin part no.8PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 1/2 Inch Fitting Size
- Working pressure (bar)
- 634
- Parker Hannifin part no.10PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 5/8 Inch Fitting Size
- Working pressure (bar)
- 414
- Parker Hannifin part no.12PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 3/4 Inch Fitting Size
- Working pressure (bar)
- 414
- Parker Hannifin part no.16PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 1 Inch Fitting Size
- Working pressure (bar)
- 414
- Parker Hannifin part no.20PNMLOS
- Description
- Hydraulic Hose Plug, Steel, 1 1/4 Inch Fitting Size
- Working pressure (bar)
- 414
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Parker Seal-Lok PNMLO Plug and Caps used for?▾
How do I read part numbers such as 4PNMLOS on the Parker Seal-Lok PNMLO Plug and Caps?▾
What sizes and part numbers does the Parker Seal-Lok PNMLO Plug and Caps come in?▾
What pressure rating does the Parker Seal-Lok PNMLO Plug and Caps have?▾
What is the Parker Seal-Lok PNMLO Plug and Caps made of?▾
Which standards and documents apply to the Parker Seal-Lok PNMLO Plug and Caps?▾
What does the Parker Seal-Lok PNMLO Plug and Caps connect to?▾
How do I install the Parker Seal-Lok PNMLO Plug and Caps so it does not leak?▾
Where is the Parker Seal-Lok PNMLO Plug and Caps used?▾
How does the Parker Seal-Lok PNMLO Plug and Caps differ from the Parker Seal-Lok PNLO Plug And Caps?▾
Where is the Parker Seal-Lok PNMLO Plug and Caps made and what is its HS code?▾
Do you stock the Parker Seal-Lok PNMLO Plug and Caps in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Verschlussstopfen
- fr
- bouchon mâle
- es
- tapón macho
- it
- tappo
From the blog
Written about this range
Buying fittings & adapters
ORFS and ORB adapters: O-ring face seal and O-ring boss — ratings, torque, sleeves and O-rings
Most hydraulic leaks that come back after re-tightening are metal seats that never sealed. ORFS and ORB move the seal to an O-ring — and that makes the O-ring the part to stock. The steel ORFS and ORB range: unions, elbows, tees, bulkheads, swivels, adjustable elbows, braze and mechanical sleeves, plugs and O-ring kits, with Parker’s ratings (9,200 psi in the small sizes) and torque by dash size.
8 min read
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read






