Rubber Molded Dock Fender

Rubber Molded Dock Fender, in 6 sizes. Indus part numbers.
Key features
- Product type: Rubber Molded Dock Fender
- Material
- Rubber
Product description
Rubber marine fenders and dock bumpers for berths, jetties and tugs. Rubber.
Sizes
6 sizes. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Molded pressing.
Choosing a size
Size a fender on the berthing energy it must absorb and the reaction the hull and structure can take; send vessel and berth details for a selection.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Rubber Molded Dock Fender |
| Sizes | 6 |
Construction
| Parameter | Value |
|---|---|
| Material | Rubber |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-MF-RMDF-150HX1000MM
- Size
- 150 H × 1000 mm
- B (mm)
- 98
- E (mm)
- 96
- H (mm)
- 150
- I (mm)
- 500
- L (mm)
- 1,000
- W (mm)
- 400
- Indus part no.IH-LR-MF-RMDF-200HX1500MM
- Size
- 200 H × 1500 mm
- B (mm)
- 165
- E (mm)
- 128
- H (mm)
- 200
- I (mm)
- 500
- L (mm)
- 1,500
- W (mm)
- 600
- Indus part no.IH-LR-MF-RMDF-250HX2000MM
- Size
- 250 H × 2000 mm
- B (mm)
- 260
- E (mm)
- 213
- H (mm)
- 250
- I (mm)
- 500
- L (mm)
- 2,000
- W (mm)
- 900
- Indus part no.IH-LR-MF-RMDF-300HX2500MM
- Size
- 300 H × 2500 mm
- B (mm)
- 390
- E (mm)
- 358
- H (mm)
- 300
- I (mm)
- 500
- L (mm)
- 2,500
- W (mm)
- 1,200
- Indus part no.IH-LR-MF-RMDF-350HX3000MM
- Size
- 350 H × 3000 mm
- B (mm)
- 550
- E (mm)
- 520
- H (mm)
- 350
- I (mm)
- 500
- L (mm)
- 3,000
- W (mm)
- 1,500
- Indus part no.IH-LR-MF-RMDF-400HX3500MM
- Size
- 400 H × 3500 mm
- B (mm)
- 700
- E (mm)
- 650
- H (mm)
- 400
- I (mm)
- 500
- L (mm)
- 3,500
- W (mm)
- 1,800
Size — Nominal size as the manufacturer states it. B — Dimension B on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. I — Dimension I on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the rubber molded dock fender and what sizes does it come in?▾
How do I read the Indus part number on the rubber molded dock fender?▾
What dimensions does the rubber molded dock fender table list?▾
How do I size a rubber molded dock fender for a berth?▾
What energy absorption and reaction force does the rubber molded dock fender have?▾
What is the rubber molded dock fender made of?▾
Which standard or certificate applies to the rubber molded dock fender?▾
What do I mount the rubber molded dock fender with, and what goes beside it?▾
How does energy absorption differ from reaction force on a rubber molded dock fender?▾
Where is the rubber molded dock fender used?▾
Rubber molded dock fender compared with the arch fender?▾
Do you stock the rubber molded dock fender, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








