Skip to content

JIC Adapters

137 SKUs7 brands

Showing 1–48 of 137 SKUs

Swivel connector, JIC 37° female swivel nuts both ends, zinc-plated steel

Female JIC 37° Swivel × Female JIC 37° Swivel Adapter

Indus HydraulicsstraightJIC 37° UN/UNF (7/16-20 to 1-7/8-12)
Inquire
Straight male × female connector, JIC 37° male × JIC female swivel nut

Male JIC 37° × Female JIC 37° Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
Inquire
Straight male connector, JIC 37° male × SAE O-ring boss male

Male JIC 37° × Male SAE ORB Adapter

Indus Hydraulics37-coneJIC 37° UN/UNF (7/16-20 to 1-7/8-12)
Inquire
Straight male connector, JIC 37° male × NPT male, zinc-plated steel hex body

Male JIC 37° × Male NPT Adapter

Indus Hydraulicsstraightup to 350 bar (5000 psi)
Inquire
Straight male connector, JIC 37° male × metric flat-face male with seal

Male JIC 37° × Male Metric Flat-Face Adapter

Indus Hydraulics-04 to -32 (1/4" to 2")37-cone
Inquire
Straight male connector, JIC 37° male × metric male, zinc-plated steel hex body

Male JIC 37° × Male Metric 24° Adapter

Indus Hydraulics-04 to -32 (1/4" to 2")JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
Inquire
Straight male connector, JIC 37° male × BSPT male, zinc-plated steel

Male JIC 37° × Male BSPT Adapter

Indus Hydraulicsstraight-04 to -32 (1/4" to 2")
Inquire
Adjustable run tee, JIC 37° male × JIC male × metric O-ring stud with locknut

Adjustable Run Tee, Male JIC 37° × JIC 37° × Metric 24°

Indus Hydraulics-04 to -32 (1/4" to 2")run-tee
Inquire
Adjustable run tee, JIC 37° male × JIC male × BSP O-ring stud with locknut

Adjustable Run Tee, Male JIC 37° × JIC 37° × BSPP

Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")
Inquire
Adjustable branch tee, JIC 37° male × NPT male × JIC 37° male, forged steel

Adjustable Branch Tee, Male JIC 37° × NPT × JIC 37°

Indus Hydraulicsbranch-teeup to 350 bar (5000 psi)
Inquire
Adjustable 90° elbow, JIC 37° male × SAE O-ring boss stud with locknut

Male JIC 37° × Male SAE ORB Adjustable 90° Elbow Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)90-elbow
Inquire
Adjustable 90° elbow, JIC 37° male × metric flat-face stud with locknut

Male JIC 37° × Male Metric Flat-Face Adjustable 90° Elbow Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
Inquire
Adjustable 90° elbow, JIC 37° male × BSP O-ring stud with locknut

Male JIC 37° × Male BSPP Adjustable 90° Elbow Adapter

Indus Hydraulicsup to 350 bar (5000 psi)90-elbow
Inquire
Adjustable 45° elbow, JIC 37° male × SAE O-ring boss stud with locknut

Male JIC 37° × Male SAE ORB Adjustable 45° Elbow Adapter

Indus Hydraulicsup to 350 bar (5000 psi)45-elbow
Inquire
90° male × female connector, JIC 37° male × JIC female, forged steel body

Male JIC 37° × Female JIC 37° 90° Elbow Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)37-cone
Inquire
90° elbow adapter, JIC 37° male flare × BSPT male, zinc-plated steel

Male JIC 37° × Male BSPT 90° Elbow Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
Inquire
90° elbow connector, JIC 37° male flare × NPT male, forged zinc-plated steel

Male JIC 37° × Male NPT 90° Elbow Adapter

Indus Hydraulics-04 to -32 (1/4" to 2")JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
Inquire
90° elbow connector, JIC 37° male flare, forged zinc-plated steel

Male JIC 37° × Male JIC 37° 90° Elbow Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)-04 to -32 (1/4" to 2")
Inquire
45° swivel connector, JIC 37° male × JIC female swivel nut, zinc-plated steel

Male JIC 37° × Female JIC 37° Swivel 45° Elbow Adapter

Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")
Inquire
45° elbow adapter, JIC 37° male flare × BSPT male, forged steel

Male JIC 37° × Male BSPT 45° Elbow Adapter

Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
Inquire
JIC swivel cap, zinc-plated steel cap nut for 37° flare ends

Swivel Cap JIC

Indus Hydraulicscap-04 to -32 (1/4" to 2")
Inquire
Steel NPTF male × JIC 37° male bulkhead connector, angled view

Steel NPTF Male × JIC 37° Male Bulkhead Connector

Indus Hydraulicsbulkhead connectorNPTF (Dryseal), 1/8" to 1-1/2" (1/8-27 to 1-1/2-11.5)
Inquire
Steel NPTF male × JIC 37° female swivel connector, angled view

Steel NPTF Male × JIC 37° Female Swivel Connector

Indus HydraulicsNPTF (Dryseal), 1/8" to 1-1/2" (1/8-27 to 1-1/2-11.5)straight connector
Inquire
Steel NPTF male × JIC 37° female swivel 90° elbow, angled view

Steel NPTF Male × JIC 37° Female Swivel 90° Elbow

Indus Hydraulics90° elbowNPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
Inquire
Steel NPTF female × JIC 37° male bulkhead connector, angled view

Steel NPTF Female × JIC 37° Male Bulkhead Connector

Indus HydraulicsNPTF (Dryseal), 1/8" to 1-1/2" (1/8-27 to 1-1/2-11.5)bulkhead connector
Inquire
Steel NPTF female × JIC 37° female swivel connector, angled view

Steel NPTF Female × JIC 37° Female Swivel Connector

Indus Hydraulicsstraight connectorDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Inquire
Steel NPTF female × JIC 37° female swivel 90° elbow, angled view

Steel NPTF Female × JIC 37° Female Swivel 90° Elbow

Indus HydraulicsNPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Inquire
Steel JIC 37° tube sleeve, angled view

Steel JIC 37° Tube Sleeve

Indus Hydraulicstube sleeveJIC tube end, 1/8" to 2" tube O.D.
Inquire
Steel JIC 37° tube nut, angled view

Steel JIC 37° Tube Nut

Indus Hydraulicsnut or sleeve for a 37° flared tube endtube nut
Inquire
Steel JIC 37° sleeve for metric tube, angled view

Steel JIC 37° Sleeve for Metric Tube

Indus Hydraulics37° flare, a metal-to-metal seat on a 74° included conetube sleeve
Inquire
Steel JIC 37° short flare nut, angled view

Steel JIC 37° Short Flare Nut

Indus Hydraulicsflare nutnut or sleeve for a 37° flared tube end
Inquire
Steel JIC 37° male × NPTF male × NPTF female service tee, angled view

Steel JIC 37° Male × NPTF Male × NPTF Female Service Tee

Indus Hydraulics37° JIC, 3/4" (1-1/16-12)37° flare, a metal-to-metal seat on a 74° included cone
Inquire
Steel JIC 37° male × NPTF male service tee, angled view

Steel JIC 37° Male × NPTF Male Service Tee

Indus Hydraulics37° flare, a metal-to-metal seat on a 74° included coneservice tee
Inquire
Steel JIC 37° male × NPTF male run tee, angled view

Steel JIC 37° Male × NPTF Male Run Tee

Indus Hydraulics37° JIC, 3/16" to 2" (3/8-24 to 2-1/2-12)37° flare, a metal-to-metal seat on a 74° included cone
Inquire
Steel JIC 37° male × NPTF female run tee, angled view

Steel JIC 37° Male × NPTF Female Run Tee

Indus Hydraulicsrun tee37° JIC, 3/16" to 2" (3/8-24 to 2-1/2-12)
Inquire
Dimension drawing of the steel JIC 37° male × NPTF female connector, lettered for the size table

Steel JIC 37° Male × NPTF Female Connector

Indus Hydraulics37° JIC, 1/8" to 2" (5/16-24 to 2-1/2-12)straight connector
Inquire
Steel JIC 37° male × NPTF female branch tee, angled view

Steel JIC 37° Male × NPTF Female Branch Tee

Indus Hydraulics37° JIC, 1/4" to 2" (7/16-20 to 2-1/2-12)37° flare, a metal-to-metal seat on a 74° included cone
Inquire
Steel JIC 37° male × NPTF female 90° elbow, angled view

Steel JIC 37° Male × NPTF Female 90° Elbow

Indus Hydraulics90° elbow37° flare, a metal-to-metal seat on a 74° included cone
Inquire
Steel JIC 37° male × NPTF female 45° elbow, angled view

Steel JIC 37° Male × NPTF Female 45° Elbow

Indus Hydraulics37° JIC, 1/4" to 1" (7/16-20 to 1-5/16-12)37° flare, a metal-to-metal seat on a 74° included cone
Inquire
Steel JIC 37° male bulkhead run tee, angled view

Steel JIC 37° Male Bulkhead Run Tee

Indus Hydraulicsbulkhead run tee37° flare, a metal-to-metal seat on a 74° included cone
Inquire

Questions we get asked

About this range

01What does the dash size mean?
The nominal size in sixteenths of an inch: a -08 is 8/16, or 1/2 inch nominal. On a JIC end it identifies the thread — a -08 is 3/4-16 UNF — rather than the bore exactly.
02Can I tighten a JIC joint harder to stop a leak?
No. The seal is the flare, and over-tightening damages it. Make the joint up by flats from finger tight, and if a correctly made joint still weeps, inspect the flare for scratches or distortion.
03Is JIC the same as SAE 45° flare?
No. They share threads on several sizes, but JIC seals on a 37° flare and SAE 45° on a 45° flare. A joint mixing the two may hold briefly, then leak.
04Why choose a JIC × SAE O-ring boss adapter rather than JIC × NPT for a port?
Because an O-ring boss seals on an elastomer O-ring, not on the thread, so it can be remade without losing engagement and, in adjustable form, aimed in any direction. An NPT end seals by thread interference, is rated lower than the O-ring boss in larger sizes, and goes deeper every time it is remade. Note that an O-ring boss end uses the same UN thread as the JIC end of the same dash size: tell them apart by the O-ring at the shoulder.
05How is a JIC bulkhead adapter fitted through a panel?
The long threaded body passes through a hole in the panel and is clamped by the bulkhead locknut, which tightens against the panel rather than sealing anything. Size the hole for the thread with a small clearance and keep the panel within the thickness the body can take. Hold the body while tightening the locknut, then make up the lines on each side by flats as for any JIC joint.
06How do I blank off a JIC line or port?
Use a JIC plug in a female swivel nut and a JIC swivel cap on a male end; both seal on the 37° flare in the same way as a working joint. Make them up by flats from finger tight like any JIC connection, not harder. For a port rather than a hose or tube end, blank it with a plug for that port type, such as an O-ring boss or BSP plug.