Steel JIC 37° Male Bulkhead Run Tee
Steel JIC 37° Male Bulkhead Run Tee, forged carbon steel, trivalent zinc plated. 9 part numbers, 3/16" to 1-1/4"; the size table gives the size on each end, dimensions in millimetres and the Parker equivalent for every Indus part number.
Key features
- Body Configuration: bulkhead run tee
- Port A Thread: 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12)
- Port A Sealing: 37° flare, a metal-to-metal seat on a 74° included cone
- Nominal Size Range: 3/16" to 1-1/4"
- Max Working Pressure: Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table
- Body Configuration
- bulkhead run tee
- Port A Thread
- 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12)
- Port A Sealing
- 37° flare, a metal-to-metal seat on a 74° included cone
Product description
The Steel JIC 37° Male Bulkhead Run Tee is a bulkhead run tee, in forged carbon steel, trivalent zinc plated. Its ends are 37° JIC male, 37° JIC bulkhead male and 37° JIC male. The 37° JIC flare is the most widely used inch-size hydraulic connection on mobile and industrial machinery.
Construction
- Body: bulkhead run tee
- End 1: 37° JIC male
- End 2: 37° JIC bulkhead male
- End 3: 37° JIC male
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- 37° JIC: 37° flare, a metal-to-metal seat on a 74° included cone; SAE J514 / ISO 8434-2.
Sizes
9 part numbers, 3/16" to 1-1/4". The Sizes & Part Numbers tab lists the size on each end, dimensions in millimetres and the Parker equivalent for every one.
- End 1: 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12)
- End 2: 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12)
- End 3: 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12)
Pressure rating
Manufacturer's published ratings (SAE J514), from 1,000 to 5,000 psi depending on size and end:
| Nom. SAE Dash Size | Nom. Tube O.D. Inches | 37 Degree Flare Straight Thread | Nom. Pipe Size | SAE St. Threads Union & Bulkhead (PSI) | Fittings With Pipe Threads (PSI) |
|---|---|---|---|---|---|
| 2 | 1/8 | 5/16-24 | 1/8 | 5000 | 5000 |
| 3 | 3/16 | 3/8-24 | 1/8 | 5000 | 5000 |
| 4 | 1/4 | 7/16-20 | 1/8 | 5000 | 5000 |
| 5 | 5/16 | 1/2-20 | 1/8 | 5000 | 5000 |
| 6 | 3/8 | 9/16-18 | 1/4 | 5000 | 5000 |
| 8 | 1/2 | 3/4-16 | 3/8 | 4500 | 4000 |
| 10 | 5/8 | 7/8-14 | 1/2 | 3500 | 3000 |
| 12 | 3/4 | 1 1/16-12 | 3/4 | 3500 | 3000 |
| 14 | 7/8 | 1 3/16-12 | 3/4 | 3000 | 2500 |
| 16 | 1 | 1 5/16-12 | 1 | 3000 | 2000 |
| 20 | 1 1/4 | 1 5/8-12 | 1 1/4 | 2500 | 1150 |
| 24 | 1 1/2 | 1 7/8-12 | 1 1/2 | 2000 | 1000 |
| 32 | 2 | 2 1/2-12 | 2 | 1500 | 1000 |
NOTE: Since many factors influence the pressure at which a system will or will not perform satisfactory, values shown in this table should not be construed as guaranteed minimum.
Parker equivalents
For 9 of the 9 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.
Stainless-steel version
The same configuration in 316 stainless steel: Stainless Steel JIC 37° Male Bulkhead Run Tee.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | bulkhead run tee |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12) |
| Port A Sealing | 37° flare, a metal-to-metal seat on a 74° included cone |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | 37° JIC, 3/16" to 1-1/4" (3/8-24 to 1-5/8-12) |
| Port B Sealing | 37° flare, a metal-to-metal seat on a 74° included cone |
| Port B Gender | bulkhead male |
Port C
| Parameter | Value |
|---|---|
| Additional Ports | 37° JIC male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 3/16" to 1-1/4" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2 |
Shipping & lead time
Sizes & part numbers
9 sizesEquivalent to Parker WJJTX, Aeroquip 203008 and SSP J#BRT (SAE 70958, MS51516). Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Aeroquip equivalent | SSP equivalent | SAE no. | MS no. | End 1 | End 2 | End 3 | Y (mm) | D1 (mm) | D2 (mm) | D3 (mm) | M1 (mm) | M2 (mm) | M3 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-ST-2704-03-03-03 | 3 WJJTX | 203008-3-3 | J3BRT | 70958 | MS51516 | 3/16" JIC 37° (3/8-24) | 3/16" JIC 37° (3/8-24) | 3/16" JIC 37° (3/8-24) | 11.1 | 3.2 | 3.2 | 3 | 23.9 | 38.1 | 23.9 |
| IH-ST-2704-04-04-04 | 4 WJJTX | 203008-4-4 | J4BRT | 70958 | MS51516 | 1/4" JIC 37° (7/16-20) | 1/4" JIC 37° (7/16-20) | 1/4" JIC 37° (7/16-20) | 11.1 | 4.4 | 4.4 | 4.3 | 24.6 | 40.4 | 24.6 |
| IH-ST-2704-05-05-05 | 5 WJJTX | 203008-5-5 | J5BRT | 70958 | MS51516 | 5/16" JIC 37° (1/2-20) | 5/16" JIC 37° (1/2-20) | 5/16" JIC 37° (1/2-20) | — | — | — | — | — | — | — |
| IH-ST-2704-06-06-06 | 6 WJJTX | 203008-6-6 | J6BRT | 70958 | MS51516 | 3/8" JIC 37° (9/16-18) | 3/8" JIC 37° (9/16-18) | 3/8" JIC 37° (9/16-18) | 14.3 | 7.5 | 7.5 | 7.4 | 27.7 | 46 | 27.7 |
| IH-ST-2704-08-08-08 | 8 WJJTX | 203008-8-8 | J8BRT | 70958 | MS51516 | 1/2" JIC 37° (3/4-16) | 1/2" JIC 37° (3/4-16) | 1/2" JIC 37° (3/4-16) | 19 | 9.9 | 9.9 | 9.9 | 34.5 | 53.6 | 34.5 |
| IH-ST-2704-10-10-10 | 10 WJJTX | 203008-10-10 | J10BRT | 70958 | MS51516 | 5/8" JIC 37° (7/8-14) | 5/8" JIC 37° (7/8-14) | 5/8" JIC 37° (7/8-14) | 22.2 | 12.3 | 12.3 | 12.2 | 39.6 | 60.7 | 39.6 |
| IH-ST-2704-12-12-12 | 12 WJJTX | 203008-12-12 | J12BRT | 70958 | MS51516 | 3/4" JIC 37° (1-1/16-12) | 3/4" JIC 37° (1-1/16-12) | 3/4" JIC 37° (1-1/16-12) | 27 | 15.5 | 15.5 | 15.2 | 45.2 | 67.8 | 45.2 |
| IH-ST-2704-16-16-16 | 16 WJJTX | 203008-16-16 | J16BRT | 70958 | MS51516 | 1" JIC 37° (1-5/16-12) | 1" JIC 37° (1-5/16-12) | 1" JIC 37° (1-5/16-12) | 33.4 | 21.4 | 21.4 | 21.3 | 49.3 | 71.1 | 49.3 |
| IH-ST-2704-20-20-20 | 20 WJJTX | 203008-20-20 | J20BRT | 70958 | MS51516 | 1-1/4" JIC 37° (1-5/8-12) | 1-1/4" JIC 37° (1-5/8-12) | 1-1/4" JIC 37° (1-5/8-12) | 41.3 | 27.4 | 27.4 | 27.2 | 55.1 | 79.2 | 55.1 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Y — Hex across flats — printed "Y HEX" on the manufacturer drawing. D1 — Dimension D1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. M1 — Dimension M1 on the manufacturer dimension drawing. M2 — Dimension M2 on the manufacturer dimension drawing. M3 — Dimension M3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
Can I match a Parker part number?▾
Is there a stainless-steel version?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- JIC Außengewinde 37° Bördel Schottverschraubung
- fr
- mâle JIC cône 37° traversée de cloison
- es
- macho JIC cono 37° pasamuros
- it
- maschio JIC cono 37° passaparatia
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
Engineers viewing this also looked at
Steel NPTF Female × JIC 37° Male Bulkhead Connector
Steel NPTF Male × JIC 37° Male Bulkhead Connector
Steel JIC 37° Short Flare Nut
Steel JIC 37° Long Flare Nut
Steel JIC 37° Tube Nut
Steel JIC 37° Tube Sleeve
Steel Convert-A-Flare Tube Nut, JIC 37° to Flareless
