Steel JIC 37° Male × NPTF Female 45° Elbow
Steel JIC 37° Male × NPTF Female 45° Elbow, forged carbon steel, trivalent zinc plated. 8 part numbers, 1/4" to 1"; the size table gives the size on each end for every Indus part number.
Key features
- Body Configuration: 45° elbow
- Port A Thread: 37° JIC, 1/4" to 1" (7/16-20 to 1-5/16-12)
- Port A Sealing: 37° flare, a metal-to-metal seat on a 74° included cone
- Nominal Size Range: 1/4" to 1"
- Body Configuration
- 45° elbow
- Port A Thread
- 37° JIC, 1/4" to 1" (7/16-20 to 1-5/16-12)
- Port A Sealing
- 37° flare, a metal-to-metal seat on a 74° included cone
Product description
The Steel JIC 37° Male × NPTF Female 45° Elbow is a 45° elbow, in forged carbon steel, trivalent zinc plated. Its ends are 37° JIC male and NPTF (Dryseal) female. The 37° JIC flare is the most widely used inch-size hydraulic connection on mobile and industrial machinery.
Construction
- Body: 45° elbow
- End 1: 37° JIC male
- End 2: NPTF (Dryseal) female
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- 37° JIC: 37° flare, a metal-to-metal seat on a 74° included cone; SAE J514 / ISO 8434-2.
- NPTF (Dryseal): Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread; ASME B1.20.3.
Sizes
8 part numbers, 1/4" to 1". The Sizes & Part Numbers tab lists the size on each end for every one.
- End 1: 37° JIC, 1/4" to 1" (7/16-20 to 1-5/16-12)
- End 2: NPTF (Dryseal), 1/4" to 1" (1/4-18 to 1-11.5)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 45° elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | 37° JIC, 1/4" to 1" (7/16-20 to 1-5/16-12) |
| Port A Sealing | 37° flare, a metal-to-metal seat on a 74° included cone |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPTF (Dryseal), 1/4" to 1" (1/4-18 to 1-11.5) |
| Port B Sealing | Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread |
| Port B Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/4" to 1" |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2, ASME B1.20.3 |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | End 1 | End 2 |
|---|---|---|
| IH-ST-2505-04-04 | 1/4" JIC 37° (7/16-20) | 1/4" NPTF (1/4-18) |
| IH-ST-2505-06-04 | 3/8" JIC 37° (9/16-18) | 1/4" NPTF (1/4-18) |
| IH-ST-2505-06-06 | 3/8" JIC 37° (9/16-18) | 3/8" NPTF (3/8-18) |
| IH-ST-2505-08-06 | 1/2" JIC 37° (3/4-16) | 3/8" NPTF (3/8-18) |
| IH-ST-2505-08-08 | 1/2" JIC 37° (3/4-16) | 1/2" NPTF (1/2-14) |
| IH-ST-2505-10-08 | 5/8" JIC 37° (7/8-14) | 1/2" NPTF (1/2-14) |
| IH-ST-2505-12-12 | 3/4" JIC 37° (1-1/16-12) | 3/4" NPTF (3/4-14) |
| IH-ST-2505-16-16 | 1" JIC 37° (1-5/16-12) | 1" NPTF (1-11.5) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
Engineers viewing this also looked at
Steel JIC 37° Male × NPTF Female Branch Tee
Steel JIC 37° Male × NPTF Male Run Tee
Steel JIC 37° Male × NPTF Female Run Tee
Steel JIC 37° Male × NPTF Male Service Tee
Steel JIC 37° Male × NPTF Male × NPTF Female Service Tee
Steel JIC 37° Male Bulkhead Run Tee
Steel NPTF Female × JIC 37° Male Bulkhead Connector
