Male JIC 37° × Male SAE ORB Adapter

Male JIC 37° × Male SAE ORB Adapter — JIC family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: straight
- Port A Thread: JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Port A Sealing: 37-cone
- Nominal Size Range: -04 to -32 (1/4" to 2")
- Max Working Pressure: up to 350 bar (5000 psi)
- Body Configuration
- straight
- Port A Thread
- JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
- Port A Sealing
- 37-cone
- Nominal Size Range
- -04 to -32 (1/4" to 2")
- Max Working Pressure
- up to 350 bar (5000 psi)
Product description
The Male Connector m JIC X m SAE is a Straight hydraulic adapter in the JIC family. Male Connector m JIC X m SAE — JIC family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Straight
- Port A: Male — JIC 37° UN/UNF (7/16-20 to 1-7/8-12) (37° cone (JIC))
- Port B: Male — SAE J1926 ORB UN/UNF (7/16-20 to 1-7/8-12) (O-ring boss (SAE J1926))
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 350 bar (5000 psi). JIC family — SAE J514 / ISO 8434-2 — 37° cone seat with UN/UNF threads. The dominant North-American hydraulic adapter family. Metal-on-metal seal, no soft seal needed.
Applicable Standards
- SAE J514
- ISO 8434-2
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | JIC 37° UN/UNF (7/16-20 to 1-7/8-12) |
| Port A Sealing | 37-cone |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | SAE J1926 ORB UN/UNF (7/16-20 to 1-7/8-12) |
| Port B Sealing | orb |
| Port B Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -32 (1/4" to 2") |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 350 bar (5000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2 |
Shipping & lead time
Sizes & part numbers
57 sizes- Indus part no.IH-AD-JIC-035-04
- Tompkins equivalent
- 6400-04-04
- End 1
- 7/16"X20
- End 2
- 7/16"X20
- S1 (mm)
- 14
- L (mm)
- 31.2
- L1 (mm)
- 14
- L2 (mm)
- 9.14
- Weight (g)
- 25
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-0405
- Tompkins equivalent
- 6400-04-05
- End 1
- 7/16"X20
- End 2
- 1/2"X20
- S1 (mm)
- 17
- L (mm)
- 31.2
- L1 (mm)
- 14
- L2 (mm)
- 9.14
- Weight (g)
- 31
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-0406
- Tompkins equivalent
- 6400-04-06
- End 1
- 7/16"X20
- End 2
- 9/16"X18
- S1 (mm)
- 17
- L (mm)
- 32.7
- L1 (mm)
- 14
- L2 (mm)
- 10
- Weight (g)
- 33
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-05
- Tompkins equivalent
- 6400-05-05
- End 1
- 1/2"X20
- End 2
- 1/2"X20
- S1 (mm)
- 17
- L (mm)
- 31.2
- L1 (mm)
- 14
- L2 (mm)
- 9.14
- Weight (g)
- 33
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-0504
- Tompkins equivalent
- 6400-05-04
- End 1
- 1/2"X20
- End 2
- 7/16"X20
- S1 (mm)
- 14
- L (mm)
- 31
- L1 (mm)
- 14
- L2 (mm)
- 9.14
- Weight (g)
- 26
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-0506
- Tompkins equivalent
- 6400-05-06
- End 1
- 1/2"X20
- End 2
- 9/16"X18
- S1 (mm)
- 17
- L (mm)
- 33
- L1 (mm)
- 14
- L2 (mm)
- 9.93
- Weight (g)
- 20
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-06
- Tompkins equivalent
- 6400-06-06
- End 1
- 9/16"X18
- End 2
- 9/16"X18
- S1 (mm)
- 17
- L (mm)
- 33
- L1 (mm)
- 14.1
- L2 (mm)
- 9.93
- Weight (g)
- 22
- Working pressure (bar)
- 315
- Indus part no.IH-AD-JIC-035-0604
- Tompkins equivalent
- 6400-06-04
- End 1
- 9/16"X18
- End 2
- 7/16"X20
- S1 (mm)
- 17
- L (mm)
- 32.2
- L1 (mm)
- 14.1
- L2 (mm)
- 9.14
- Weight (g)
- 35
- Working pressure (bar)
- 315
Show all 57 sizesShow fewer sizes
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Tompkins. Tompkins part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is the Male Connector m JIC X m SAE and where is it used?▾
How do I read the part number IH-AD-JIC-035-0405 on the Male Connector m JIC X m SAE?▾
Which Tompkins part numbers match the Male Connector m JIC X m SAE?▾
What sizes does the Male Connector m JIC X m SAE come in?▾
How do I match the Male Connector m JIC X m SAE to my port or hose?▾
What pressure is the Male Connector m JIC X m SAE rated for?▾
What is the Male Connector m JIC X m SAE made from, and is stainless available?▾
Which standards does the Male Connector m JIC X m SAE follow?▾
What mates with the Male Connector m JIC X m SAE?▾
How do I install the Male Connector m JIC X m SAE without leaks?▾
Where is the Male Connector m JIC X m SAE made, and can you export it from Dubai?▾
Is the Male Connector m JIC X m SAE available from stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Adapter JIC Außengewinde 37° Bördel auf O-Ring Boss (ORB) Außengewinde
- fr
- adaptateur JIC mâle cône 37° sur O-Ring Boss (ORB) mâle
- es
- adaptador JIC macho cono 37° a O-Ring Boss (ORB) macho
- it
- adattatore JIC maschio cono 37° a O-Ring Boss (ORB) maschio
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Buying fittings & adapters
JIC 37° adapters: the shapes, sizes, ratings and how to order the right one
A JIC adapter is defined by three things: its shape, its two ends and its dash size. Get all three in the order and the right part arrives; miss one and you get a JIC × NPT elbow when the port was ORB. The steel 37° range — straights, elbows, tees, crosses, bulkheads, swivels, adjustable port ends, caps and plugs — with Parker’s published ratings by dash size, torque and flats, and a checklist for ordering.
8 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read






