Skip to content

Topic

Pneumatics & compressed air

A pneumatic circuit is cheap to build and easy to get almost right: a cylinder a bore too small, a valve that starves it, wet air, a tube that softens in the sun. These guides cover the choices that decide whether a machine runs at its rated speed for years or stalls on its first hot afternoon.

Articles
14
Reading
211 min
Updated
Eight solenoid valves on an aluminium manifold in a control cabinet, coils lit green, blue and black air tubes in the ports

Start here

Solenoid valve functions explained: 3/2, 5/2 and 5/3 valves, centre conditions and port numbers

What “5/2” and “5/3 closed centre” actually mean, how to read the ISO symbol in words, normally closed vs normally open 3/2 valves, single vs double solenoid 5/2 valves, the three 5/3 centre conditions and when each one is right, direct-acting vs pilot-operated valves and the pilot pressure they need, and the port numbers 1, 2, 3, 4, 5, 12 and 14.

13 min read

All 14 articles

October 202613

  1. Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared12 min
  2. Air motors: vane or piston, how the torque curve behaves, and how to size one at your pressure12 min
  3. Manual and air-pilot valves: hand-lever, foot-pedal, push-button, roller and pilot valves explained11 min
  4. Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder12 min
  5. Air safety valves, soft-start, dump and lockout valves: protecting the receiver and the person servicing the machine13 min
  6. Pneumatic grippers and vacuum cups: choosing the jaw style, sizing the grip force and the pad14 min
  7. Cylinder speed control: meter-out flow controls, quick exhaust valves and pilot-operated checks11 min
  8. Pneumatic cylinder cushioning and mounting: kinetic energy limits, side load, alignment couplers and buckling24 min
  9. Compressed air quality and ISO 8573-1: purity classes, pressure dew point and where to fix the water14 min
  10. Sizing pneumatic valves: Cv, Kv, sonic conductance and matching a valve to a cylinder13 min
  11. FRL units explained: filter, regulator and lubricator — order, grades, drains, bowls and sizing17 min
  12. How to size a pneumatic cylinder: force, load ratio, pressure at the port and air consumption22 min
  13. Pneumatic cylinder types: tie-rod, round-body, compact, guided and rodless — and what ISO 15552, ISO 6432 and NFPA really fix23 min

Topic guide

The short version

What each part of a pneumatic circuit has to get right
PartThe decisionWhat goes wrong
Air preparation (FRL)Filter grade, regulator range, lubricated or notWater and rust in valves, pressure sag under load
Directional valveHighlighted3/2, 5/2 or 5/3, flow (Cv), voltage, manifoldValve too small for the cylinder, wrong centre position
CylinderBore for force, stroke, mount, cushioningUndersized bore, side load on the rod
Tubing and fittingsMaterial, OD, temperature and pressure ratingTube too small for the flow, softening in heat
Flow and safetyMeter-out speed control, quick exhaust, soft start, lockoutCylinders that lunge, trapped energy at maintenance

Building or repairing a pneumatic circuit?

Send the maker part numbers, or the bore, stroke, port size, voltage and supply pressure. We will quote the cylinders, valves and air preparation by maker part number, delivered across the Gulf.

Plant-down? Call +971 52 2477942 — 24/7