HYDAC SB330-10A1/112A9-330A Bladder Accumulator, 10 L, 330 bar
Category image · Seals & AccessoriesHYDAC SB330-10A1/112A9-330A: a 10 L bladder accumulator rated 330 bar, with 9.3 L effective gas volume, an NBR bladder in a carbon steel shell and a G 2 BSP fluid port. It weighs 33 kg.
Key features
- Capacity: 10 L
- Pressure (max): 330 bar
Product description
The HYDAC SB330-10A1/112A9-330A is a 10-litre bladder accumulator from HYDAC's standard SB330 range. A closed NBR bladder holds a nitrogen charge inside a seamless steel shell. As system pressure rises, oil flows in and compresses the gas; when pressure falls, the gas expands and pushes the stored oil back into the circuit. An oil valve at the port closes when the oil has been expelled, so the bladder stays inside the shell.
HYDAC lists energy storage, shock absorption, pulsation damping, leakage-loss compensation and volume compensation as typical uses.
The model code
- SB330 — standard bladder accumulator series
- 10 — nominal volume, litres
- A — standard fluid port, thread with internal seal face
- 1 — standard gas side, 7/8-14UNF gas valve
- 112 — carbon steel fluid port and shell, NBR bladder
- A9 — certification code: China and Hong Kong
- 330 — permitted operating pressure, bar
- A — fluid connection threaded to ISO 228 (BSP), G 2
The certification code matters for installation in the UAE: HYDAC supplies test documents for the country of installation, which must be stated at order, and the permitted pressure can differ between certifications. Tell us where the accumulator will be installed. The pre-charge pressure is not part of the code either; HYDAC sets it to the figure you give at order.
Data
- Nominal volume: 10 L; effective gas volume: 9.3 L
- Permitted operating pressure: 330 bar
- Fluid port: G 2 (ISO 228); gas valve 7/8-14UNF
- Maximum fluid flow: 15 L/s under optimum conditions, installed vertically
- Operating temperature: −10 to +80 °C
- Weight: 33 kg
- Dimensions: 582 mm long overall, 229 mm diameter (maximum)
These figures are for the standard 10 L. HYDAC also makes a slimline 10 L, marked (SV), with a G 1 1/4 port, 170 mm diameter and 31 kg; the model code here carries no SV. Weights are tabulated for HYDAC's CC U and CC S builds.
Pre-charge
Charge with nitrogen of at least class 2.8, never air or oxygen. HYDAC's limits: the pre-charge pressure no more than 0.9 times the minimum operating pressure, and the maximum operating pressure no more than four times the pre-charge.
Installation and spares
Mount it vertically, horizontally or at an angle, with the oil valve pointing down when vertical or slanted; vertical is preferred for energy storage, because horizontal or slanted mounting reduces the usable volume and flow. HYDAC recommends its mounting clamps on accumulators over 1 L or where vibration is strong. Spares: bladder assembly 236088, seal kit 353621, repair kit 2106212.
Ordering
Quote SB330-10A1/112A9-330A with the pre-charge pressure and the country of installation. We supply genuine HYDAC accumulators and confirm lead time on the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 L |
| Pressure (max) | 330 bar |
| Pre-charge | Set to order (nitrogen) |
| Effective gas volume | 9.3 L |
| Operating temperature | −10 to +80 °C |
Mechanical
| Parameter | Value |
|---|---|
| Bladder material | NBR |
| Weight | 33 kg |
| Fluid port | G 2 (ISO 228) |
| Gas valve | 7/8-14UNF |
| Shell | Carbon steel |
Identification
| Parameter | Value |
|---|---|
| Certification code | A9 (China / Hong Kong) |
Shipping & lead time
What is the HYDAC SB330-10A1/112A9-330A bladder accumulator used for?▾
How do I read the model code SB330-10A1/112A9-330A?▾
What is the oil volume and fluid port of the 10 L HYDAC SB330 accumulator?▾
How big and how heavy is the HYDAC SB330-10A1/112A9-330A accumulator?▾
What pressure and temperature does the HYDAC SB330 10 L accumulator allow?▾
What are the shell and bladder of the HYDAC SB330 10 L accumulator made from?▾
What does the A9 certification code on the HYDAC SB330 10 L accumulator mean?▾
Which gas and pre-charge does the HYDAC SB330 10 L accumulator need?▾
How should the HYDAC SB330 10 L accumulator be mounted?▾
What spares exist for the HYDAC SB330-10A1/112A9-330A?▾
How does the 10 L HYDAC SB330 accumulator differ from the 4 L?▾
Can I buy the HYDAC SB330-10A1/112A9-330A bladder accumulator from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
