HYDAC SB330-4A1/112A9-330A Bladder Accumulator, 4 L, 330 bar
Category image · Seals & AccessoriesHYDAC SB330-4A1/112A9-330A: a 4 L bladder accumulator rated 330 bar, with 3.7 L effective gas volume, an NBR bladder in a carbon steel shell and a G 1 1/4 BSP fluid port. It weighs 15 kg.
Key features
- Capacity: 4 L
- Pressure (max): 330 bar
Product description
The HYDAC SB330-4A1/112A9-330A is a 4-litre bladder accumulator from HYDAC's standard SB330 range. A closed NBR bladder holds a nitrogen charge inside a seamless steel shell. As system pressure rises, oil flows in and compresses the gas; when pressure falls, the gas expands and pushes the stored oil back into the circuit. An oil valve at the port closes when the oil has been expelled, so the bladder stays inside the shell.
HYDAC lists energy storage, shock absorption, pulsation damping, leakage-loss compensation and volume compensation as typical uses.
The model code
- SB330 — standard bladder accumulator series
- 4 — nominal volume, litres
- A — standard fluid port, thread with internal seal face
- 1 — standard gas side, 7/8-14UNF gas valve
- 112 — carbon steel fluid port and shell, NBR bladder
- A9 — certification code: China and Hong Kong
- 330 — permitted operating pressure, bar
- A — fluid connection threaded to ISO 228 (BSP), G 1 1/4
The certification code matters for installation in the UAE: HYDAC supplies test documents for the country of installation, which must be stated at order, and the permitted pressure can differ between certifications. Tell us where the accumulator will be installed. The pre-charge pressure is not part of the code either; HYDAC sets it to the figure you give at order.
Data
- Nominal volume: 4 L; effective gas volume: 3.7 L
- Permitted operating pressure: 330 bar
- Fluid port: G 1 1/4 (ISO 228); gas valve 7/8-14UNF
- Maximum fluid flow: 10 L/s under optimum conditions, installed vertically
- Operating temperature: −10 to +80 °C
- Weight: 15 kg
- Dimensions: 412 mm long overall, 170 mm diameter (maximum)
HYDAC tabulates weights and dimensions for its CC U and CC S builds; the A9 build is presumed identical in the vessel.
Pre-charge
Charge with nitrogen of at least class 2.8, never air or oxygen. HYDAC's limits: the pre-charge pressure no more than 0.9 times the minimum operating pressure, and the maximum operating pressure no more than four times the pre-charge.
Installation and spares
Mount it vertically, horizontally or at an angle, with the oil valve pointing down when vertical or slanted; vertical is preferred for energy storage, because horizontal or slanted mounting reduces the usable volume and flow. HYDAC recommends its mounting clamps on accumulators over 1 L or where vibration is strong. Spares: bladder assembly 236046, seal kit 353609, repair kit 2106204.
Ordering
Quote SB330-4A1/112A9-330A with the pre-charge pressure and the country of installation. We supply genuine HYDAC accumulators and confirm lead time on the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 4 L |
| Pressure (max) | 330 bar |
| Pre-charge | Set to order (nitrogen) |
| Effective gas volume | 3.7 L |
| Operating temperature | −10 to +80 °C |
Mechanical
| Parameter | Value |
|---|---|
| Bladder material | NBR |
| Weight | 15 kg |
| Fluid port | G 1 1/4 (ISO 228) |
| Gas valve | 7/8-14UNF |
| Shell | Carbon steel |
Identification
| Parameter | Value |
|---|---|
| Certification code | A9 (China / Hong Kong) |
Shipping & lead time
What is the HYDAC SB330-4A1/112A9-330A bladder accumulator used for?▾
How do I read the model code SB330-4A1/112A9-330A?▾
What is the oil volume and fluid port of the 4 L HYDAC SB330 accumulator?▾
How big and how heavy is the HYDAC SB330-4A1/112A9-330A accumulator?▾
What pressure and temperature does the HYDAC SB330 4 L accumulator allow?▾
What are the shell and bladder of the HYDAC SB330 4 L accumulator made from?▾
What does the A9 certification code on the HYDAC SB330 4 L accumulator mean?▾
Which gas and pre-charge does the HYDAC SB330 4 L accumulator need?▾
How should the HYDAC SB330 4 L accumulator be mounted?▾
What spares exist for the HYDAC SB330-4A1/112A9-330A?▾
How does the 4 L HYDAC SB330 accumulator differ from the 10 L?▾
Is the HYDAC SB330-4A1/112A9-330A bladder accumulator in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Maintenance & reliability
Grease and zerk fittings: thread types, and the ones that seize
The smallest threaded part on the machine, in four thread families that all look alike, and the one that will not take grease at six in the morning is always the one you cannot reach.
4 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
