Manual Chain Block — Type E, 0.5–20 t WLL

Manual Chain Block, in 8 sizes, 0.5 t to 20 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Manual Chain Block
- Size range: 0.5 t to 20 t
- Working load limit: 0.5 to 20 t
- Size range
- 0.5 t to 20 t
- Working load limit
- 0.5 to 20 t
Product description
Manual chain hoists for lifting and positioning loads by hand.
Sizes and ratings
8 sizes, 0.5 t to 20 t. Working load limit 0.5 to 20 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Choose on rated capacity, the lift you need and the headroom you have. Standard lift is supplied; longer lifts are made to order.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Manual Chain Block |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.5 t to 20 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.5 to 20 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes- Indus part no.IH-LR-CB-E-0T5
- Size
- 0.5 t
- WLL (t)
- 0.5
- Proof load (t)
- 0.75
- Standard lift (m)
- 2.5
- Hand pull (N)
- 167
- Load chain (mm)
- 6
- Falls
- 1
- Min. hook distance (mm)
- 280
- Extra lift weight (kg/m)
- 1.8
- A (mm)
- 142
- B (mm)
- 126
- C (mm)
- 28
- D (mm)
- 142
- Weight (kg)
- 9.5
- Indus part no.IH-LR-CB-E-1T
- Size
- 1 t
- WLL (t)
- 1
- Proof load (t)
- 1.5
- Standard lift (m)
- 2.5
- Hand pull (N)
- 314
- Load chain (mm)
- 6
- Falls
- 1
- Min. hook distance (mm)
- 300
- Extra lift weight (kg/m)
- 1.8
- A (mm)
- 142
- B (mm)
- 126
- C (mm)
- 28
- D (mm)
- 142
- Weight (kg)
- 10
- Indus part no.IH-LR-CB-E-1T5
- Size
- 1.5 t
- WLL (t)
- 1.5
- Proof load (t)
- 2.25
- Standard lift (m)
- 2.5
- Hand pull (N)
- 373
- Load chain (mm)
- 8
- Falls
- 1
- Min. hook distance (mm)
- 360
- Extra lift weight (kg/m)
- 2.4
- A (mm)
- 178
- B (mm)
- 142
- C (mm)
- 32
- D (mm)
- 178
- Weight (kg)
- 15
- Indus part no.IH-LR-CB-E-2T
- Size
- 2 t
- WLL (t)
- 2
- Proof load (t)
- 3
- Standard lift (m)
- 2.5
- Hand pull (N)
- 314
- Load chain (mm)
- 6
- Falls
- 2
- Min. hook distance (mm)
- 380
- Extra lift weight (kg/m)
- 2.7
- A (mm)
- 142
- B (mm)
- 126
- C (mm)
- 34
- D (mm)
- 142
- Weight (kg)
- 14
- Indus part no.IH-LR-CB-E-3T
- Size
- 3 t
- WLL (t)
- 3
- Proof load (t)
- 4.5
- Standard lift (m)
- 3
- Hand pull (N)
- 373
- Load chain (mm)
- 8
- Falls
- 2
- Min. hook distance (mm)
- 470
- Extra lift weight (kg/m)
- 3.8
- A (mm)
- 178
- B (mm)
- 142
- C (mm)
- 38
- D (mm)
- 178
- Weight (kg)
- 24
- Indus part no.IH-LR-CB-E-5T
- Size
- 5 t
- WLL (t)
- 5
- Proof load (t)
- 7.5
- Standard lift (m)
- 3
- Hand pull (N)
- 516
- Load chain (mm)
- 10
- Falls
- 2
- Min. hook distance (mm)
- 600
- Extra lift weight (kg/m)
- 5.3
- A (mm)
- 210
- B (mm)
- 165
- C (mm)
- 48
- D (mm)
- 210
- Weight (kg)
- 36
- Indus part no.IH-LR-CB-E-10T
- Size
- 10 t
- WLL (t)
- 10
- Proof load (t)
- 15
- Standard lift (m)
- 3
- Hand pull (N)
- 516
- Load chain (mm)
- 10
- Falls
- 4
- Min. hook distance (mm)
- 730
- Extra lift weight (kg/m)
- 9.8
- A (mm)
- 358
- B (mm)
- 165
- C (mm)
- 64
- D (mm)
- 210
- Weight (kg)
- 68
- Indus part no.IH-LR-CB-E-20T
- Size
- 20 t
- WLL (t)
- 20
- Proof load (t)
- 30
- Standard lift (m)
- 3
- Hand pull (N)
- 516
- Load chain (mm)
- 10
- Falls
- 8
- Min. hook distance (mm)
- 1,000
- Extra lift weight (kg/m)
- 19.6
- A (mm)
- 580
- B (mm)
- 195
- C (mm)
- 82
- D (mm)
- 210
- Weight (kg)
- 150
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Standard lift — Lift supplied as standard; longer lifts to order. Hand pull — Pull on the hand chain needed to lift the rated load. Load chain — Diameter of the load chain. Falls — Number of falls of load chain. Min. hook distance — Headroom — the closest the two hooks come. Extra lift weight — Weight added by each extra metre of lift. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Manual Chain Block, Type E used for?▾
How do I read an Indus part number for Manual Chain Block, Type E, such as IH-LR-CB-E-0T5?▾
What sizes does Manual Chain Block, Type E come in?▾
How do I choose the right size of Manual Chain Block, Type E?▾
What is the rated load of Manual Chain Block, Type E?▾
What material and finish is Manual Chain Block, Type E supplied in?▾
What standard and certificate apply to Manual Chain Block, Type E?▾
What does Manual Chain Block, Type E connect to or work with?▾
How should Manual Chain Block, Type E be inspected and looked after?▾
How does Manual Chain Block, Type E differ from Manual Chain Block — Type A?▾
How are Manual Chain Block, Type E shipped, and can they be exported from Dubai?▾
Is the Manual Chain Block — Type E available from Indus Hydraulics in Dubai, and what is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Chain block vs lever hoist vs electric hoist: which to use for the lift
A chain block lifts straight up and down, from overhead. A lever hoist pulls, lifts and tensions in any direction, as long as the pull runs straight hook to hook. An electric hoist does the work for you, all day, rated by duty class. Here is how they compare and which one fits the job.
5 min read
Lifting & rigging
Rigging for plant shutdowns and turnarounds: lifting points, chain blocks and certified kit
A shutdown compresses months of maintenance into weeks, and much of it is lifting: pump motors out, exchanger bundles pulled, valves swapped, in congested units with no room for a crane. The rigging that makes it possible — lifting points, chain blocks, lever hoists, beam clamps and trolleys — how to plan and certify it before the unit comes down, and how to keep the register straight when hundreds of items come and go.
3 min read
Lifting & rigging
Vertical and horizontal plate lifting clamps: pairs, jaw range and when to use each
A vertical clamp grips one plate edge-up; horizontal clamps work in pairs to lift plates flat. How each type grips, why the jaw range and the rating basis matter, and where a beam clamp fits in.
5 min read








