
Inspecting fittings on arrival: the five-minute check
A box of adapters is easy to sign for and hard to argue about later. Five checks on the loading bay, and the two faults that only show up under pressure.
3 min read
From the workshop · Indus blog
No SEO bait, no marketing fluff. Just practical writing about hydraulic systems from the people who specify, install and rebuild them every day.

A box of adapters is easy to sign for and hard to argue about later. Five checks on the loading bay, and the two faults that only show up under pressure.
3 min read

When the next delivery is a month away, stocking decisions are risk decisions. What to hold, what to skip, and the two categories people always get backwards.
3 min read

A kit built from a catalogue is mostly parts you will never fit. A kit built from a yard walk is small, cheap, and covers the failures that actually happen.
3 min read

A part number describes a fitting in one manufacturer’s language. Translating it means decoding what it says about geometry — and geometry is the only thing that has to match.
3 min read

Six things turn an enquiry into a named part on the first reply. Sending five of them is the difference between a quote today and three days of questions.
3 min read

A mixed fleet forces you to join families that were never meant to meet. Where that is ordinary engineering, where it becomes a leak with a schedule, and how to design it out at the next hose change.
4 min read

A board of known samples on the wall answers in five seconds what a catalogue answers in twenty minutes. What to put on it, how to label it, and what to keep off it.
3 min read

No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read

Workshops ask which standard "we use here". Countries do not have thread standards — they have import histories, and the drawer should be stocked for the fleet rather than the flag.
3 min read

These machines sit between the Japanese and European worlds, and the honest answer is that a single machine can carry both. What that means for how you identify and how you stock.
3 min read

Metric 24° cone covers most of it, but the same tube size exists in two series with different threads. Knowing which one you are holding is the whole job.
3 min read

JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read
Newsletter · 2× a month
Engineers and procurement leads get our notes every other Tuesday.
Send us a circuit, a failure photo or a bare SKU. Our applications engineers reply same business day, no charge.
Ask an engineer →