Copper Hourglass Sleeve
Copper Hourglass Sleeve, in 11 sizes, 3/64″ to 1/2″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Copper Hourglass Sleeve
- Size range: 3/64″ to 1/2″
- Size range
- 3/64″ to 1/2″
- Material
- Copper
Product description
Ferrules and sleeves are pressed onto wire rope to form an eye, a splice or a stop. Copper.
Sizes
11 sizes, 3/64″ to 1/2″. Every size has its own Indus part number in the table below.
Manufacturer's data
- Extruded copper for non-rusting permanent splices.
- Must be swaged correctly to reach the termination's rated strength.
Choosing a size
Size the ferrule to the rope and press it with the die made for that ferrule — the finished diameter is what makes the termination. Aluminium suits steel rope in normal service, copper suits stainless rope.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Copper Hourglass Sleeve |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3/64″ to 1/2″ |
Construction
| Parameter | Value |
|---|---|
| Material | Copper |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
11 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | L (mm) | Weight (kg/1000 pcs) |
|---|---|---|---|---|---|---|---|
| IH-LR-FS-CUHG-005 | 3/64″ | 1.6 | 3.2 | 3.6 | 5.2 | 9.5 | 1 |
| IH-LR-FS-CUHG-006 | 1/16″ | 2.4 | 4.4 | 4.4 | 6.3 | 9.9 | 1.4 |
| IH-LR-FS-CUHG-009 | 3/32″ | 2.8 | 6.3 | 6 | 9.5 | 11.5 | 4 |
| IH-LR-FS-CUHG-012 | 1/8″ | 4 | 8.3 | 8.3 | 12.7 | 14.3 | 8 |
| IH-LR-FS-CUHG-016 | 5/32″ | 4.8 | 10.7 | 9.5 | 15.1 | 15.9 | 12.3 |
| IH-LR-FS-CUHG-019 | 3/16″ | 5.6 | 11.1 | 11.1 | 17.1 | 22.2 | 25 |
| IH-LR-FS-CUHG-022 | 7/32″ | 6.3 | 13.1 | 11.9 | 18.3 | 22.2 | 32 |
| IH-LR-FS-CUHG-025 | 1/4″ | 7.1 | 15.1 | 13.5 | 21.4 | 34.9 | 36 |
| IH-LR-FS-CUHG-031 | 5/16″ | 9.5 | 18.3 | 16.7 | 4.4 | 34.9 | 64 |
| IH-LR-FS-CUHG-038 | 3/8″ | 11.1 | 20.6 | 18.3 | 34.9 | 139.7 | 89 |
| IH-LR-FS-CUHG-050 | 1/2″ | 15.1 | 6.7 | 24.6 | 37.3 | 54 | 270 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight of 1,000 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the copper hourglass sleeve come in?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
Engineers viewing this also looked at
Copper Button Stop
Duplex Swaging Sleeve — S-506 Pattern
Flemish Eye Steel Swaging Sleeve, S-505 Pattern
Steel Oval Sleeve
Steel Stop Button
Stainless Steel Ferrule — EN 13411-3 (DIN 3093)
Aluminium Ferrule — EN 13411-3 (DIN 3093)
