Flemish Eye Steel Swaging Sleeve, S-505 Pattern
Flemish Eye Steel Swaging Sleeve, S-505 Pattern, in 27 sizes, 1/4″ to 6″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Flemish Eye Steel Swaging Sleeve, S-505 Pattern
- Pattern / standard: S-505
- Size range: 1/4″ to 6″
- Size range
- 1/4″ to 6″
- Material
- Steel
Product description
Ferrules and sleeves are pressed onto wire rope to form an eye, a splice or a stop. This range follows the S-505 pattern, sized to interchange in an existing rigging plan. Steel.
Sizes
27 sizes, 1/4″ to 6″. Every size has its own Indus part number in the table below.
Choosing a size
Size the ferrule to the rope and press it with the die made for that ferrule — the finished diameter is what makes the termination. Aluminium suits steel rope in normal service, copper suits stainless rope.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Flemish Eye Steel Swaging Sleeve, S-505 Pattern |
| Pattern / standard | S-505 |
| Sizes | 27 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 6″ |
Construction
| Parameter | Value |
|---|---|
| Material | Steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
27 sizesReplaces the Crosby S-505 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
| Indus part no. | Size | Max. after swage (mm) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (kg/100 pcs) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-FS-S505-025 | 1/4″ | 14.5 | 25.4 | 16.8 | 11.9 | 7.9 | 7.1 | 2.27 |
| IH-LR-FS-S505-031 | 5/16″ | 19 | 38.1 | 23.1 | 15.7 | 9.7 | 11.2 | 6.36 |
| IH-LR-FS-S505-038 | 3/8″ | 19 | 38.1 | 23.1 | 16.8 | 11.9 | 9.9 | 6.36 |
| IH-LR-FS-S505-044 | 7/16″ | 25.7 | 50.8 | 31 | 21.6 | 13.5 | 16.5 | 15 |
| IH-LR-FS-S505-050 | 1/2″ | 25.7 | 50.8 | 31 | 23.1 | 16 | 14.2 | 13 |
| IH-LR-FS-S505-056 | 9/16″ | 31.5 | 69.8 | 37.3 | 26.2 | 17.8 | 16 | 29 |
| IH-LR-FS-S505-062 | 5/8″ | 31.5 | 69.8 | 37.3 | 27.7 | 19 | 16 | 26 |
| IH-LR-FS-S505-075 | 3/4″ | 37.1 | 81 | 43.7 | 32.5 | 23.1 | 21.3 | 40 |
| IH-LR-FS-S505-088 | 7/8″ | 42.7 | 90.4 | 51.6 | 38.9 | 26.2 | 25.4 | 60 |
| IH-LR-FS-S505-100 | 1″ | 49 | 101.6 | 57.9 | 43.7 | 29.5 | 28.7 | 89 |
| IH-LR-FS-S505-100-012 | 1″-1/8″ | 54.1 | 121.9 | 63.5 | 49.3 | 32.5 | 31.8 | 118 |
| IH-LR-FS-S505-100-025 | 1″-1/4″ | 58.9 | 131.8 | 70.6 | 54.9 | 36.6 | 35.8 | 161 |
| IH-LR-FS-S505-100-038 | 1″-3/8″ | 64 | 147.6 | 76.2 | 60.5 | 39.6 | 39.6 | 192 |
| IH-LR-FS-S505-100-050 | 1″-1/2″ | 68.8 | 158.8 | 82.5 | 66.8 | 42.9 | 42.9 | 227 |
| IH-LR-FS-S505-100-075 | 1″-3/4″ | 78.7 | 184.1 | 97.5 | 79.5 | 49.3 | 50 | 366 |
| IH-LR-FS-S505-200 | 2″ | 90.4 | 215.9 | 111.3 | 92.2 | 57.1 | 57.1 | 514 |
| IH-LR-FS-S505-200-025 | 2″-1/4″ | 104.6 | 242.8 | 127.8 | 102.4 | 63.5 | 64.3 | 879 |
| IH-LR-FS-S505-200-050 | 2″-1/2″ | 114.3 | 266.7 | 139.7 | 114.3 | 69.8 | 71.4 | 1,068 |
| IH-LR-FS-S505-200-075 | 2″-3/4″ | 119.4 | 292.1 | 146 | 120.6 | 76.2 | 78.5 | 1,271 |
| IH-LR-FS-S505-300 | 3″ | 126 | 304.8 | 152.4 | 127 | 82.5 | 85.9 | 1,335 |
| IH-LR-FS-S505-300-025 | 3″-1/4″ | 136.4 | 330.2 | 165.1 | 137.9 | 98 | 89.9 | 1,650 |
| IH-LR-FS-S505-300-050 | 3″-1/2″ | 146.6 | 355.6 | 177.8 | 148.3 | 98.6 | 100.1 | 2,106 |
| IH-LR-FS-S505-300-075 | 3″-3/4″ | 158.2 | 381 | 190.5 | 160.3 | 103.1 | 107.9 | 2,497 |
| IH-LR-FS-S505-400 | 4″ | 169.9 | 406.4 | 206.5 | 173 | 111.3 | 114.3 | 3,087 |
| IH-LR-FS-S505-400-050 | 4″-1/2″ | 189.2 | 457.2 | 231.9 | 194.6 | 124 | 128.5 | 4,540 |
| IH-LR-FS-S505-500 | 5″ | 210.3 | 508 | 267.2 | 221.7 | 139.7 | 143 | 6,600 |
| IH-LR-FS-S505-600 | 6″ | 252.2 | 609.6 | 318.5 | 259.1 | 165.1 | 171.4 | 12,300 |
Size — Nominal size as the manufacturer states it. Max. after swage — Largest dimension across the sleeve once swaged. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What sizes does the flemish eye steel swaging sleeve, S-505 pattern come in?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this part
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read
Lifting & rigging
Ferrule-secured eye vs Flemish eye vs hand splice: wire rope terminations compared
Every way of making an eye in wire rope keeps a different share of the rope’s strength. Sockets keep all of it; ferrule-secured and Flemish eyes about 90% or better; a hand splice less, and less again as the rope gets bigger. Here is the efficiency table, how each eye is made, and where each one belongs.
4 min read
Engineers viewing this also looked at
Steel Oval Sleeve
Steel Stop Button
Stainless Steel Ferrule — EN 13411-3 (DIN 3093)
Aluminium Ferrule — EN 13411-3 (DIN 3093)
Aluminium Ferrule — Form C (Tapered)
Aluminium Hourglass Sleeve
Aluminium Ferrule — JIS Type
