Steel Stop Button — 1/8–1-1/4″

Steel Stop Button, in 14 sizes, 1/8″ to 1-1/4″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Steel Stop Button
- Size range: 1/8″ to 1-1/4″
- Size range
- 1/8″ to 1-1/4″
- Material
- Steel
Product description
Ferrules and sleeves are pressed onto wire rope to form an eye, a splice or a stop. Steel.
Sizes
14 sizes, 1/8″ to 1-1/4″. Every size has its own Indus part number in the table below.
Choosing a size
Size the ferrule to the rope and press it with the die made for that ferrule — the finished diameter is what makes the termination. Aluminium suits steel rope in normal service, copper suits stainless rope.
Ordering
Quote the Indus part number from the size table, or send the size you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Steel Stop Button |
| Sizes | 14 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/8″ to 1-1/4″ |
Construction
| Parameter | Value |
|---|---|
| Material | Steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
14 sizes- Indus part no.IH-LR-FS-SSB-012
- Size
- 1/8″
- Max. after swage (mm)
- 10.2
- A (mm)
- 3.6
- D (mm)
- 11.2
- L (mm)
- 12.7
- Weight (lbs/100 pcs)
- 2
- Indus part no.IH-LR-FS-SSB-019
- Size
- 3/16″
- Max. after swage (mm)
- 13.2
- A (mm)
- 5.1
- D (mm)
- 14.2
- L (mm)
- 17.8
- Weight (lbs/100 pcs)
- 4
- Indus part no.IH-LR-FS-SSB-025
- Size
- 1/4″
- Max. after swage (mm)
- 14.7
- A (mm)
- 7.6
- D (mm)
- 16
- L (mm)
- 26.9
- Weight (lbs/100 pcs)
- 8
- Indus part no.IH-LR-FS-SSB-031
- Size
- 5/16″
- Max. after swage (mm)
- 19.6
- A (mm)
- 9.1
- D (mm)
- 22.4
- L (mm)
- 28.7
- Weight (lbs/100 pcs)
- 16
- Indus part no.IH-LR-FS-SSB-038
- Size
- 3/8″
- Max. after swage (mm)
- 19.6
- A (mm)
- 10.7
- D (mm)
- 22.4
- L (mm)
- 37.6
- Weight (lbs/100 pcs)
- 15
- Indus part no.IH-LR-FS-SSB-044
- Size
- 7/16″
- Max. after swage (mm)
- 26.2
- A (mm)
- 12.2
- D (mm)
- 28.7
- L (mm)
- 41.4
- Weight (lbs/100 pcs)
- 30
- Indus part no.IH-LR-FS-SSB-050
- Size
- 1/2″
- Max. after swage (mm)
- 29.5
- A (mm)
- 14
- D (mm)
- 33.3
- L (mm)
- 48
- Weight (lbs/100 pcs)
- 50
- Indus part no.IH-LR-FS-SSB-056
- Size
- 9/16″
- Max. after swage (mm)
- 32.8
- A (mm)
- 15.5
- D (mm)
- 36.6
- L (mm)
- 51.3
- Weight (lbs/100 pcs)
- 70
Show all 14 sizesShow fewer sizes
- Indus part no.IH-LR-FS-SSB-062
- Size
- 5/8″
- Max. after swage (mm)
- 36.1
- A (mm)
- 17
- D (mm)
- 39.6
- L (mm)
- 61.5
- Weight (lbs/100 pcs)
- 100
- Indus part no.IH-LR-FS-SSB-075
- Size
- 3/4″
- Max. after swage (mm)
- 39.4
- A (mm)
- 20.1
- D (mm)
- 42.9
- L (mm)
- 69.3
- Weight (lbs/100 pcs)
- 131
- Indus part no.IH-LR-FS-SSB-088
- Size
- 7/8″
- Max. after swage (mm)
- 45.7
- A (mm)
- 23.9
- D (mm)
- 50.8
- L (mm)
- 83.1
- Weight (lbs/100 pcs)
- 220
- Indus part no.IH-LR-FS-SSB-100
- Size
- 1″
- Max. after swage (mm)
- 52.1
- A (mm)
- 40.6
- D (mm)
- 57.1
- L (mm)
- 93.2
- Weight (lbs/100 pcs)
- 310
- Indus part no.IH-LR-FS-SSB-112
- Size
- 1-1/8″
- Max. after swage (mm)
- 58.4
- A (mm)
- 30.2
- D (mm)
- 65
- L (mm)
- 102.9
- Weight (lbs/100 pcs)
- 450
- Indus part no.IH-LR-FS-SSB-125
- Size
- 1-1/4″
- Max. after swage (mm)
- 65
- A (mm)
- 33.8
- D (mm)
- 71.4
- L (mm)
- 116.3
- Weight (lbs/100 pcs)
- 650
Size — Nominal size as the manufacturer states it. Max. after swage — Largest dimension across the sleeve once swaged. A — Dimension A on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight of 100 pieces, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Steel Stop Button and where is it used?▾
How do I read Steel Stop Button part numbers such as IH-LR-FS-SSB-012?▾
Which sizes does the Steel Stop Button come in?▾
How should I pick the size of Steel Stop Button for my job?▾
What is the rated capacity of the Steel Stop Button?▾
What is the Steel Stop Button made from and how is it finished?▾
What standard and certificate apply to the Steel Stop Button?▾
What do I use with the Steel Stop Button?▾
How should the Steel Stop Button be fitted and inspected?▾
How does the Steel Stop Button compare with the Aluminium Stop Button?▾
Do you ship the Steel Stop Button outside the UAE?▾
Do you hold the Steel Stop Button for delivery from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Lifting & rigging
Ferrule-secured eye vs Flemish eye vs hand splice: wire rope terminations compared
Every way of making an eye in wire rope keeps a different share of the rope’s strength. Sockets keep all of it; ferrule-secured and Flemish eyes about 90% or better; a hand splice less, and less again as the rope gets bigger. Here is the efficiency table, how each eye is made, and where each one belongs.
4 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








