Category
TPU Lay Flat Hoses
TPU lay flat hose is extruded through a circular-woven polyester jacket in one pass, so tube, jacket and cover cannot separate. It carries the highest pressures in the range, resists abrasion when dragged and runs to 400 m per length. Choose by service: dewatering and frac water, borehole risers, fuel, drinking water, concrete, slurry or compressed air.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
TPU Lay Flat Hoses across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Lay flat hose is the easiest large-bore line to move: empty, it rolls flat, so several hundred metres travel on one reel and a container holds a whole dewatering or transfer system. It ships from Dubai as bulk coils up to 400 m or as made-up assemblies with the couplings fitted and tested, with the size table and pressure rating for each bore. Send the flow, the line length and the lift, and we will size the bore before quoting.
Beyond the Gulf
- North Africa
- Egypt, Mauritania, Morocco
- East Africa
- Kenya, Madagascar, Mozambique
- Southern Africa
- South Africa, Zambia, Zimbabwe
From the blog
Written about this range
Industrial hose
Frac water transfer with lay flat hose: sizing, pressure and layout for GCC well pads
A fractured gas well can take millions of litres of water, delivered at rates of 40 to 100+ barrels a minute. Large-bore lay flat hose moves it from pond to pad faster than any temporary pipe. How to size the line, what pressure it must carry, which couplings hold, and what changes when the water is treated seawater — as at Saudi Arabia’s Jafurah field.
7 min read
Industrial hose
Antistatic fuel transfer hose: earthing, bonding and lay flat for diesel lines
Diesel flowing through a hose generates static charge. If the hose or a coupling is electrically isolated, that charge can build until it sparks. How bonded (M) and conductive (Ω) hoses differ, how to earth a temporary fuel line, and where an antistatic lay flat hose fits at drilling camps, rigs and remote sites.
6 min read
Industrial hose
Lay flat compressed air hose for mines, quarries and sites — and how to keep it safe
Compressed air drives rock drills, breakers and pumps on mine benches, in tunnels and on construction sites — and a long air main of lay flat hose is quicker to run out and recover than rigid pipe. But air stores energy: a failed hose or coupling whips with lethal force. Where lay flat air hose fits, how to size it, and the rules on safety devices, whip checks and restraints from OSHA, MSHA and HSE.
5 min read