Skip to content

Metric Adapters

84 SKUs4 brands

Showing 49–84 of 84 SKUs

Category image · Hoses & Fittings
Straight adapter, metric male 74° cone, zinc-plated steel hex body

Metric Male 74° Cone

Indus HydraulicsMetric M10×1 to M45×2-10 to -45
Inquire
Metric male tee, male thread on three ends, zinc-plated steel

Male Metric Tee

Indus Hydraulicsup to 400 barM10×1 to M42×2
Inquire
Metric male cross, four male ends, yellow zinc-plated steel

Male Cross Metric

Indus HydraulicsMetric M10×1 to M42×2cross
Inquire
JIS metric male 60° cone plugs, yellow zinc-plated steel, two shown

JIS Metric Male 60° Cone Plug

Indus HydraulicsJIS 30° cone (60° included), metric threadMetric M14×1.5 to M33×1.5
Inquire
Straight adapter, JIS metric male 60° cone, zinc-plated steel hex body

JIS Metric Male 60° Cone

Indus Hydraulics-14 to -42Metric M14×1.5 to M42×1.5
Inquire
Metric hollow hex plug with flat seal face, yellow zinc-plated steel

Hollow Hex Plug Metric Flat

Indus HydraulicsM10×1 to M42×2flat-face
Inquire
Straight adapter, plain butt-weld tube end × metric female O-ring hex body

Butt-Weld Tube × Metric Female O-Ring

Indus HydraulicsstraightButt-weld tube end
Inquire
Metric flat-face bulkhead union, straight with long threaded body and locknut

Bulkhead Union Metric Flat

Indus HydraulicsbulkheadM10×1 to M42×2
Inquire
Bonded seal (Dowty washer), steel ring with vulcanised rubber sealing lip

BSM Bonded Seal

Indus HydraulicsM10×1 to M42×2Bonded-seal washer for BSPP / metric ports (sizes 1/8" to 2" / M10 to M42)
Inquire
90° elbow adapter, metric male O-ring × metric adjustable stud end with locknut

90° Metric Male O-Ring × Metric Male Adjustable Stud End

Indus Hydraulics-12 to -52Metric M12×1.25 to M52×2
Inquire
90° elbow adapter, metric male O-ring × butt-weld tube end

90° Metric Male O-Ring × Butt-Weld Tube

Indus HydraulicsMetric O-ring stud end90 elbow
Inquire
90° elbow adapter, metric male O-ring both ends, forged zinc-plated steel

90° Metric Male O-Ring

Indus HydraulicsMetric M12×1.25 to M52×290 elbow
Inquire
90° elbow adapter, metric O-ring male × female swivel nut, zinc-plated steel

90° Elbow Metric O-Ring

Indus Hydraulics-12 to -52Metric M12×1.25 to M52×2
Inquire
90° elbow adapter, metric male 74° cone × SAE O-ring boss adjustable stud end

90° Elbow Metric Male 74° Cone × O-Ring Boss

Indus HydraulicsMetric 37° cone (74° included)-16 to -45
Inquire
90° elbow adapter, metric male 74° cone × NPT male, forged zinc-plated steel

90° Elbow Metric Male 74° Cone × NPT Male

Indus Hydraulics90 elbow-12 to -52
Inquire
90° elbow adapter, metric male 74° cone × metric adjustable stud end (ISO)

90° Elbow Metric Male 74° Cone × Metric Male Adjustable Stud End ISO

Indus Hydraulics-14 to -45Metric 37° cone (74° included)
Inquire
Straight male connector, Komatsu thread both ends, zinc-plated steel hex body

Male Connector m Komatsu

Indus HydraulicsstraightMetric M10×1 to M42×2
Inquire
90° elbow adapter, metric male 74° cone × metric female 74° seat swivel nut

90° Elbow Metric Male 74° Cone × Metric Female 74° Seat

Indus HydraulicsMetric 37° cone (74° included)up to 350 bar (5,076 psi), manufacturer stated
Inquire
Straight adapter, JIS metric male 60° cone × metric male, zinc-plated steel

JIS Metric Male 60° Cone × Metric Male

Indus HydraulicsJIS 30° cone (60° included), metric thread-14 to -36
Inquire
90° elbow adapter, metric male 74° cone × BSP O-ring adjustable stud end

90° Elbow Metric Male 74° Cone × BSP Male O-Ring Adjustable Stud End

Indus HydraulicsMetric 37° cone (74° included)Metric M14×1.5 to M45×2
Inquire
90° elbow bulkhead adapter, metric male 74° cone, long threaded body with locknut

90° Elbow Metric Male 74° Cone Bulkhead

Indus Hydraulics-12 to -45Metric M12×1.5 to M45×2
Inquire
Straight adapter, JIS metric male 60° cone × BSPT male, zinc-plated steel

JIS Metric Male 60° Cone × BSPT Male

Indus HydraulicsstraightJIS 30° cone (60° included), metric thread
Inquire
90° elbow adapter, JIS metric male 60° cone × metric adjustable stud end

90° Elbow JIS Metric Male 60° Cone × Metric Male Adjustable Stud End

Indus HydraulicsJIS 30° cone (60° included), metric thread-14 to -36
Inquire
90° elbow adapter, JIS metric male 60° cone × BSP O-ring adjustable stud end

90° Elbow JIS Metric Male 60° Cone × BSP Male O-Ring Adjustable Stud End

Indus Hydraulics-14 to -42JIS 30° cone (60° included), metric thread
Inquire
Straight adapter, JIS metric male 60° cone × BSP male O-ring

JIS Metric Male 60° Cone × BSP Male O-Ring

Indus Hydraulics-14 to -33Metric M14×1.5 to M33×1.5
Inquire
90° metric bulkhead elbow, flat face, long threaded body with locknut

90° Bulkhead Metric Flat

Indus HydraulicsM10×1 to M42×2Metric M10×1 to M42×2
Inquire
JIS metric male 60° cone tee, male thread on three ends, zinc-plated steel

JIS Metric Male 60° Cone Tee

Indus Hydraulics-14 to -33JIS 30° cone (60° included), metric thread
Inquire
45° elbow adapter, metric male 74° cone × NPT male, forged zinc-plated steel

45° Elbow Metric Male 74° Cone × NPT Male

Indus Hydraulics-12 to -4545 elbow
Inquire

Questions we get asked

About this range

01How do I tell an ISO 6149 port from a DIN 3852 port?
An ISO 6149 port has a raised identification ring on its spot-face and seals on an O-ring in a truncated housing. A DIN 3852 port is a plain spot-face sealed by a bonded or elastomer seal on the stud end.
02Are JIS metric and DIN metric ends interchangeable?
No. JIS metric ends seal on a 60° cone and DIN metric ends on a 24° cone; the threads can look alike, but the seats are different.
03Do you stock Komatsu adapters?
Yes — metric adapters made to Komatsu’s specification sit on this shelf alongside the standard ranges.
04Which thread sizes does an ISO 6149 metric port use?
ISO 6149-1 ports run from M8×1 up to M60×2. The common hydraulic sizes are M10×1, M12×1.5, M14×1.5, M16×1.5, M18×1.5, M20×1.5, M22×1.5, M27×2, M33×2 and M42×2. Measure the outside diameter of the male thread and the distance between crests to read it, then look for the raised identification ring on the port spot-face to confirm it is ISO 6149 rather than a plain DIN face port of the same thread.
05What is a butt-weld tube end on a metric adapter for?
It is a plain end machined to be butt-welded to steel tube, so a welded pipework system can be joined to a metric port or fitting. Remove every O-ring and seal before welding and fit them after the part has cooled, because the heat destroys elastomers. Match the adapter material and wall to the tube, and clean scale out of the bore before the line goes into service.
06Which way round do I fit an adjustable metric elbow?
Fit the stud end into the port first, then connect the tube or hose to the other end. Back the locknut off fully, screw the elbow in by hand until the washer touches the port face, turn it back no more than one turn to aim it, then hold the body and tighten the locknut. Making up the line end first and then winding the stud in twists the line and can cut the O-ring.
07What sizes of metric hydraulic adapter do you supply?
Metric adapters run from M10×1 to M42×2. Examples include metric 24° cone ends at M12×1.5 to M24×1.5 and plugs at M14×1.5 to M33×1.5. The size table on this page lists each adapter.
08What end types do metric hydraulic adapters have?
Ends include ISO 6149 O-ring studs, flat-seal and bonded-seal studs, 74° cone and JIS 60° cone ends, Komatsu-specification connectors and butt-weld ends. They come as connectors, elbows, tees, crosses, bulkheads, plugs and caps.