90° Metric Male O-Ring × Butt-Weld Tube
90° Metric Male O-Ring × Butt-Weld Tube — metric adapter, 90 elbow body, 12 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: 90 elbow
- Port A Thread: Metric M12×1.25 to M52×2
- Port A Sealing: Metric O-ring stud end
- Nominal Size Range: -12 to -52
- Body Configuration
- 90 elbow
- Port A Thread
- Metric M12×1.25 to M52×2
- Port A Sealing
- Metric O-ring stud end
- Nominal Size Range
- -12 to -52
Product description
The 90° Metric Male O-Ring × Butt-Weld Tube is a 90 elbow hydraulic adapter in the Indus metric range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.
Construction
- Body configuration: 90 elbow
- Port A: 90° Metric Male O-Ring
- Port B: Butt-Weld Tube
- Material: carbon steel (stainless steel available on request)
- Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant
Threads
- Port A: Metric M12×1.25 to M52×2
Sealing
Metric O-ring stud end and Butt-weld tube end. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.
Performance
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
Applicable standards
ISO 6149.
How to order
Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.
Companion products
These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 90 elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | Metric M12×1.25 to M52×2 |
| Port A Sealing | Metric O-ring stud end |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -12 to -52 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 6149 |
Shipping & lead time
Sizes & part numbers
12 sizes| Indus part no. | Thread | Tube O.D. (mm) | S1 (mm) | A (mm) | B (mm) | D (mm) | O-ring |
|---|---|---|---|---|---|---|---|
| IH-AD-MET-028-1206 | M12X1.25 | 6 | 12 | 20.5 | 16.5 | 6 | 8×1.9 |
| IH-AD-MET-028-1408 | M14X1.5 | 8 | 14 | 22.5 | 17.5 | 8 | 10×1.9 |
| IH-AD-MET-028-1610 | M16X1.5 | 10 | 17 | 24 | 19.5 | 10 | 11×1.9 |
| IH-AD-MET-028-1812 | M18X1.5 | 12 | 19 | 26 | 25 | 12 | 13×1.9 |
| IH-AD-MET-028-2214 | M22X1.5 | 14 | 22 | 29 | 27 | 14 | 16×2.4 |
| IH-AD-MET-028-2718 | M27X1.5 | 18 | 27 | 32.5 | 29.5 | 18 | 20×2.4 |
| IH-AD-MET-028-3022 | M30X1.5 | 22 | 30 | 35.5 | 33.5 | 22 | 24×2.4 |
| IH-AD-MET-028-3628 | M36X2 | 28 | 36 | 42 | 39 | 28 | 30×3.1 |
| IH-AD-MET-028-3930 | M39X2 | 30 | 41 | 47.5 | 43 | 30 | 32×3.1 |
| IH-AD-MET-028-4234 | M42X2 | 34 | 41 | 49.5 | 43 | 34 | 35×3.1 |
| IH-AD-MET-028-4538 | M45X2 | 38 | 46 | 52.5 | 47.5 | 38 | 38×3.1 |
| IH-AD-MET-028-5242 | M52X2 | 42 | 50 | 57 | 50 | 42 | 40×3.1 |
Tube O.D. — Outside diameter of the tube the port is cut for. S1 — Dimension S1 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. O-ring — O-ring size supplied with the fitting, as inside diameter × section. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What sizes does the 90° Metric Male O-Ring × Butt-Weld Tube come in?▾
Is it available in stainless steel?▾
Can I get it faster than the quoted lead time?▾
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Thread & fitting identification
Korean excavator hydraulic fittings: expect more than one convention
These machines sit between the Japanese and European worlds, and the honest answer is that a single machine can carry both. What that means for how you identify and how you stock.
3 min read
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
Engineers viewing this also looked at
Butt-Weld Tube × Metric Female O-Ring
Metric Male 74° Cone
Metric Male 74° Cone × BSPT Male
90° Elbow Metric Male 74° Cone × BSPT Male
Metric Male 74° Cone × SAE O-Ring Boss
90° Elbow Metric Male 74° Cone × O-Ring Boss
Metric Male 74° Cone × NPT Male
