Weld-in Socket Weld

Weld-in Socket Weld — Hydraulic SAE Flange family weld flange for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: weld-flange
- Port A Thread: SAE J518 flange face (Code 61 / Code 62)
- Port A Sealing: flange-face
- Nominal Size Range: 1/2" to 5"
- Max Working Pressure: Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
- Body Configuration
- weld-flange
- Port A Thread
- SAE J518 flange face (Code 61 / Code 62)
- Port A Sealing
- flange-face
- Nominal Size Range
- 1/2" to 5"
- Max Working Pressure
- Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
Product description
The Weld-in Socket Weld is a Weld flange hydraulic adapter in the Hydraulic SAE Flange family. Weld-in Socket Weld — Hydraulic SAE Flange family weld flange for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Weld flange
- Port A: Flange face — SAE J518 flange face (Code 61 / Code 62) (SAE J518 flange face)
- Port B: Weld end — Socket weld for tube/pipe end (1/2" to 5") (Welded end)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi). Hydraulic SAE Flange family — SAE J518 4-bolt flanges (Code 61 standard / Code 62 high-pressure) with BSP- or NPT-threaded back, weld-in / weld-on, blind-flange, or accessory variants.
Applicable Standards
- SAE J518
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | weld-flange |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | SAE J518 flange face (Code 61 / Code 62) |
| Port A Sealing | flange-face |
| Port A Gender | flange-face |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | Socket weld for tube/pipe end (1/2" to 5") |
| Port B Sealing | weld |
| Port B Gender | weld |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/2" to 5" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J518 |
Shipping & lead time
What is the Indus Weld-in Socket Weld SAE flange used for?▾
Which sizes does the Indus Weld-in Socket Weld flange come in?▾
What are the port connections of the Indus Weld-in Socket Weld flange?▾
What pressure is the Indus Weld-in Socket Weld flange rated for?▾
What is the Indus Weld-in Socket Weld flange made of and how is it finished?▾
Which standard does the Indus Weld-in Socket Weld flange follow?▾
What do I need to assemble the Indus Weld-in Socket Weld flange?▾
How do I install the Indus Weld-in Socket Weld flange?▾
Indus Weld-in Socket Weld or Weld-on Butt Weld: which flange should I choose?▾
Where does the Indus Weld-in Socket Weld flange come from?▾
When should I specify the Indus Weld-in Socket Weld rather than another SAE flange?▾
Do you stock the Indus Weld-in Socket Weld flange in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE-Flansch
- fr
- bride SAE
- es
- brida SAE
- it
- flangia SAE
From the blog
Written about this range
Specification & standards
SAE J518 Code 61 and Code 62 flanges: telling them apart before you order
Two split-flange halves for the same bore, one rated for far more pressure than the other, and almost nothing on the part to say which is which. The measurement that settles it takes ten seconds.
5 min read
Buying fittings & adapters
SAE flange adapters: Code 61 and Code 62 flange heads, pad adapters and how to choose them
Above 1" and on pump ports, threads give way to four bolts and an O-ring. An SAE flange adapter turns that four-bolt port into a JIC, ORFS, NPTF, ORB or weld connection — in Code 61 to 5,000 psi in small sizes, or Code 62 to 6,000 psi through 2". Flange heads versus flange pad adapters, Code 61 against Code 62, pressure by size, and what an order has to state.
5 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read






