BSP Threaded

BSP Threaded — Hydraulic SAE Flange family flange for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: flange
- Port A Thread: SAE J518 flange face (Code 61 / Code 62)
- Port A Sealing: flange-face
- Nominal Size Range: 1/2" to 5"
- Max Working Pressure: Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
- Body Configuration
- flange
- Port A Thread
- SAE J518 flange face (Code 61 / Code 62)
- Port A Sealing
- flange-face
- Nominal Size Range
- 1/2" to 5"
- Max Working Pressure
- Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)
Product description
The BSP Threaded is a Threaded flange hydraulic adapter in the Hydraulic SAE Flange family. BSP Threaded — Hydraulic SAE Flange family flange for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Threaded flange
- Port A: Flange face — SAE J518 flange face (Code 61 / Code 62) (SAE J518 flange face)
- Port B: Female — BSPP G1/2 to G2 (parallel) (Bonded-seal washer)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi). Hydraulic SAE Flange family — SAE J518 4-bolt flanges (Code 61 standard / Code 62 high-pressure) with BSP- or NPT-threaded back, weld-in / weld-on, blind-flange, or accessory variants.
Applicable Standards
- SAE J518
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | flange |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | SAE J518 flange face (Code 61 / Code 62) |
| Port A Sealing | flange-face |
| Port A Gender | flange-face |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | BSPP G1/2 to G2 (parallel) |
| Port B Sealing | bonded-seal |
| Port B Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/2" to 5" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J518 |
Shipping & lead time
What is the Indus BSP Threaded SAE flange used for?▾
Which sizes does the Indus BSP Threaded flange come in?▾
What are the port connections of the Indus BSP Threaded flange?▾
What pressure is the Indus BSP Threaded flange rated for?▾
What is the Indus BSP Threaded flange made of and how is it finished?▾
Which standard does the Indus BSP Threaded flange follow?▾
What do I need to assemble the Indus BSP Threaded flange?▾
How do I install the Indus BSP Threaded flange?▾
Indus BSP Threaded or NPT Threaded: which flange should I choose?▾
Where does the Indus BSP Threaded flange come from?▾
When should I specify the Indus BSP Threaded rather than another SAE flange?▾
Do you stock the Indus BSP Threaded flange in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE-Flansch BSP
- fr
- bride SAE BSP
- es
- brida SAE BSP
- it
- flangia SAE BSP
From the blog
Written about this part
Specification & standards
SAE J518 Code 61 and Code 62 flanges: telling them apart before you order
Two split-flange halves for the same bore, one rated for far more pressure than the other, and almost nothing on the part to say which is which. The measurement that settles it takes ten seconds.
5 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read








