Skip to content
IH-TF-CU-PVC

Plastic-Coated Copper Tubes

Copper TubesEx-stock · delivery in 3 days
PVC-coated copper tube in a gentle bend, white coating stripped back from the cut end to show bare copper
VIEW 01·PVC-coated copper tube in a gentle bend, white coating stripped back from the cut end to show bare copper

Copper tube with a factory-applied plastic coating that protects it in walls, floors and buried runs and colour-codes the service: water, gas or heating. Made to EN 1057, EN 13349. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: Plastic-Coated Copper Tubes
  • Construction: Seamless drawn
  • Standards: EN 1057, EN 13349
  • Base tube material: Cu-DHP CW024A / C12200
  • Fin material: coating: PVC or PE
  • Outside diameter: 15–54 mm
Product type
Plastic-Coated Copper Tubes
Construction
Seamless drawn
Base tube material
Cu-DHP CW024A / C12200
Fin material
coating: PVC or PE
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Copper tube with a factory-applied plastic coating that protects it in walls, floors and buried runs and colour-codes the service: water, gas or heating.

Specification

  • Base tube: Cu-DHP CW024A to EN 1057; C12200 to B68/B75 per source page
  • Service temperature (PE coating): up to 95 °C, occasional peaks 110 °C
  • Colour coding: blue/green water, yellow gas, white heating

Standards

EN 1057, EN 13349. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Materials

  • Tube: Cu-DHP CW024A / C12200
  • Fins: coating: PVC or PE

Testing and documents

  • Bare tube eddy-current tested before coating (source page; not verified)
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Where it is used

  • Buried or in-screed water and gas lines, LPG kits

Sizes

6 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typePlastic-Coated Copper Tubes
ConstructionSeamless drawn

Compliance

ParameterValue
StandardsEN 1057, EN 13349

Construction

ParameterValue
Base tube materialCu-DHP CW024A / C12200
Fin materialcoating: PVC or PE

Dimensions

ParameterValue
Outside diameter15–54 mm
LengthRandom or fixed lengths; cut to length on request
Size tableTypical sizes — other sizes on request

Quality

ParameterValue
TestingBare tube eddy-current tested before coating (source page; not verified)
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Application

ParameterValue
Typical servicesBuried or in-screed water and gas lines, LPG kits

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at