Skip to content

Metric Adapters

84 SKUs4 brands

Showing 1–48 of 84 SKUs

Straight male connector, SAE O-ring × Komatsu thread, zinc-plated steel hex body

Male SAE ORB × Male Komatsu 30° Adapter

Indus HydraulicsstraightM10×1 to M42×2
Inquire
Straight male connector, NPT × Komatsu thread, zinc-plated steel hex body

Male NPT × Male Komatsu 30° Adapter

Indus HydraulicsNPT taper 1/8" to 2"npt-taper
Inquire
Straight male connector, metric × SAE O-ring thread, zinc-plated steel hex body

Male Metric 24° × Male SAE ORB Adapter

Indus HydraulicsM10×1 to M42×2straight
Inquire
Straight male connector, metric × metric with O-ring, zinc-plated steel hex body

Male Metric 24° × Male Metric 24° Adapter

Indus HydraulicsstraightMetric M10×1 to M42×2 (24° cone)
Inquire
Straight male connector, metric × Komatsu thread with O-ring, zinc-plated steel

Male Metric 24° × Male Komatsu 30° Adapter

Indus HydraulicsMetric M10×1 to M42×2 (24° cone)24-cone
Inquire
Straight male connector, metric flat face × Komatsu thread, zinc-plated steel

Male Metric Flat-Face × Male Komatsu 30° Adapter

Indus Hydraulicsup to 400 barMetric M10×1 to M42×2 (flat-face)
Inquire
Metric swivel cap, zinc-plated steel cap nut with female thread

Swivel Cap Metric

Indus HydraulicsM10×1 to M42×2up to 400 bar
Inquire
Line drawing of the steel NPTF male × metric female adapter

Steel NPTF Male × Metric Female Adapter

Indus Hydraulicsstraight adapterDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Inquire
Line drawing of the steel metric male × NPTF female adapter

Steel Metric Male × NPTF Female Adapter

Indus Hydraulicsmetric thread; the sealing method depends on the mating port, so confirm it before orderingstraight adapter
Inquire
Steel metric male × BSPP female swivel adapter, angled view

Steel Metric Male × BSPP Female Swivel Adapter

Indus Hydraulicsmetric thread; the sealing method depends on the mating port, so confirm it before orderingmetric, M12×1.5 to M30×1.5
Inquire
Steel metric female × metric female adapter, angled view

Steel Metric Female × Metric Female Adapter

Indus Hydraulicsstraight adaptermetric thread; the sealing method depends on the mating port, so confirm it before ordering
Inquire
Steel metric dual-purpose male (port or 24° tube) × NPTF female adapter, S series, angled view

Steel Metric Dual-Purpose Male (Port or 24° Tube) × NPTF Female Adapter, S Series

Indus Hydraulicsmetric 24° cone / port (dual purpose), M20×1.5 to M42×2dual-purpose metric end: takes a DIN 2353 24° tube nut and cutting ring, or screws into a metric port
Inquire
Steel metric dual-purpose male (port or 24° tube) × NPTF female adapter, L series, angled view

Steel Metric Dual-Purpose Male (Port or 24° Tube) × NPTF Female Adapter, L Series

Indus Hydraulicsmetric 24° cone / port (dual purpose), M12×1.5 to M26×1.5dual-purpose metric end: takes a DIN 2353 24° tube nut and cutting ring, or screws into a metric port
Inquire
Steel JIC 37° male × metric ORFS female adapter, angled view

Steel JIC 37° Male × Metric ORFS Female Adapter

Indus Hydraulicsstraight adapter37° JIC, 1/2" (3/4-16)
Inquire
Line drawing of the steel JIC 37° male × metric adjustable branch tee

Steel JIC 37° Male × Metric Adjustable Branch Tee

Indus Hydraulics37° JIC, 1/4" to 1" (7/16-20 to 1-5/16-12)adjustable branch tee
Inquire
Line drawing of the steel JIC 37° male × metric 24° female swivel adapter

Steel JIC 37° Male × Metric 24° Female Swivel Adapter

Indus Hydraulics37° flare, a metal-to-metal seat on a 74° included cone37° JIC, 1/4" to 5/8" (7/16-20 to 7/8-14)
Inquire
Steel BSPP male × metric 24° female swivel adapter, angled view

Steel BSPP Male × Metric 24° Female Swivel Adapter

Indus HydraulicsBSPP, 1/4" to 3/4" (G1/4-19 to G3/4-14)straight adapter
Inquire
Metric plug with flat seal and O-ring, zinc-plated steel hex head

Plug Metric Seal Flat

Indus HydraulicsMetric M10×1 to M42×2 (flat-face)flat-face
Inquire
Metric plugs, yellow zinc-plated steel hex head, two views

Plug Metric

Indus Hydraulics24-coneplug
Inquire
Straight adapter, metric male O-ring × NPT male, zinc-plated steel hex body

Metric Male O-Ring × NPT Male

Indus HydraulicsMetric O-ring stud end-14 to -52
Inquire
Run tee, metric male 74° cone × metric adjustable stud end, zinc-plated steel

Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee

Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45
Inquire
Straight adapter, metric male O-ring × metric male, zinc-plated steel hex body

Metric Male O-Ring × Metric Male

Indus HydraulicsstraightMetric M12×1.25 to M52×2
Inquire
Run tee, metric male O-ring × metric female swivel nut on the run

Metric Male O-Ring × Metric Female Run Tee

Indus Hydraulicsrun teeMetric M14×1.5 to M52×2
Inquire
Branch tee, metric male 74° cone × metric adjustable stud end, zinc-plated steel

Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee

Indus HydraulicsMetric 37° cone (74° included)Metric M14×1.5 to M45×2
Inquire
Branch tee, metric male O-ring run × metric female swivel nut branch

Metric Male O-Ring × Metric Female Branch Tee

Indus HydraulicsMetric M14×1.5 to M52×2-14 to -52
Inquire
Straight adapter, metric male O-ring × plain butt-weld tube end, hex body

Metric Male O-Ring × Butt-Weld Tube

Indus HydraulicsstraightMetric O-ring stud end
Inquire
Straight adapter, metric male 74° cone × SAE O-ring boss, zinc-plated steel

Metric Male 74° Cone × SAE O-Ring Boss

Indus HydraulicsMetric 37° cone (74° included)Metric M16×1.5 to M45×2
Inquire
Straight adapter, metric male 74° cone × metric adjustable stud end

Metric Male 74° Cone × Metric Male Adjustable Stud End

Indus HydraulicsMetric M14×1.5 to M45×2Metric 37° cone (74° included)
Inquire
Straight adapter, metric male 74° cone × NPT male, zinc-plated steel

Metric Male 74° Cone × NPT Male

Indus Hydraulicsstraight-12 to -52
Inquire
Straight adapter, metric male 74° cone × BSPT male, zinc-plated steel

Metric Male 74° Cone × BSPT Male

Indus Hydraulics-10 to -45Metric 37° cone (74° included)
Inquire
Straight adapter, metric male 74° cone × BSP male O-ring, zinc-plated steel

Metric Male 74° Cone × BSP Male O-Ring

Indus Hydraulicsstraight-14 to -45
Inquire
Category image · Hoses & Fittings
Category image · Hoses & Fittings
Category image · Hoses & Fittings
Category image · Hoses & Fittings
Metric male 74° cone tee, male thread on three ends, zinc-plated steel

Metric Male 74° Cone Tee

Indus HydraulicsMetric M14×1.5 to M33×2up to 350 bar (5,076 psi), manufacturer stated
Inquire
Metric male 74° cone plugs, yellow zinc-plated steel, two shown

Metric Male 74° Cone Plug

Indus Hydraulicsup to 350 bar (5,076 psi), manufacturer stated-10 to -45
Inquire
Metric male 74° cone bulkhead union, straight with long threaded body and locknut

Metric Male 74° Cone Bulkhead

Indus HydraulicsMetric 37° cone (74° included)-10 to -45
Inquire

Questions we get asked

About this range

01How do I tell an ISO 6149 port from a DIN 3852 port?
An ISO 6149 port has a raised identification ring on its spot-face and seals on an O-ring in a truncated housing. A DIN 3852 port is a plain spot-face sealed by a bonded or elastomer seal on the stud end.
02Are JIS metric and DIN metric ends interchangeable?
No. JIS metric ends seal on a 60° cone and DIN metric ends on a 24° cone; the threads can look alike, but the seats are different.
03Do you stock Komatsu adapters?
Yes — metric adapters made to Komatsu’s specification sit on this shelf alongside the standard ranges.
04Which thread sizes does an ISO 6149 metric port use?
ISO 6149-1 ports run from M8×1 up to M60×2. The common hydraulic sizes are M10×1, M12×1.5, M14×1.5, M16×1.5, M18×1.5, M20×1.5, M22×1.5, M27×2, M33×2 and M42×2. Measure the outside diameter of the male thread and the distance between crests to read it, then look for the raised identification ring on the port spot-face to confirm it is ISO 6149 rather than a plain DIN face port of the same thread.
05What is a butt-weld tube end on a metric adapter for?
It is a plain end machined to be butt-welded to steel tube, so a welded pipework system can be joined to a metric port or fitting. Remove every O-ring and seal before welding and fit them after the part has cooled, because the heat destroys elastomers. Match the adapter material and wall to the tube, and clean scale out of the bore before the line goes into service.
06Which way round do I fit an adjustable metric elbow?
Fit the stud end into the port first, then connect the tube or hose to the other end. Back the locknut off fully, screw the elbow in by hand until the washer touches the port face, turn it back no more than one turn to aim it, then hold the body and tighten the locknut. Making up the line end first and then winding the stud in twists the line and can cut the O-ring.